Cf/Al复合材料管件的真空液相成型工艺研究

以高模高强碳纤维M40J(6K)增强铝基复合管为研究对象，研究了真空反压液相浸渗工艺中，纤维束丝分散技术、预制件压缩强度提高技术及碳纤维涂层对管件成型及性能的影响。结果表明：SiCp可以起分散作用，有利于浸渍；加入10％的偏磷酸盐的预制件经680℃真空去胶后的压缩性能满足浸渗要求，纤维保持了较好的平直度且分布均匀。C-Al2O3涂层对复合材料的性能有较大影响，经涂层处理后的预制件所制备出的复合材料的强度比未经涂层处理的提高了13％左右。所制备的复合材料的比强度、比模量较高，密度小于2．5g／cm^3。     

基于网络的可重构电火花线切割CAD/CAM系统研究

针时线切割行业的特点，给出了一种切实可行的基于网络的线切割CAD／CAM系统开发方案，该系统分为可重构的客户端软件和可伸缩的服务器端软件两部分。文中对系统的体系结构、客户端软件的重构、工艺数据库以及服务器载荷的平衡、网络流量的控制等相关技术进行了研究和探讨，并对相关技术进行了验证，结果表明开发方案和其中采用的技术是可行的和有效的。     

连续自由流电泳微重力下分离模式蛋白质的研究

以连续自由流电泳的区带电泳模式分离血红蛋白和细胞色素C，比较了不同缓冲液甘油浓度下的分离效果，确定了最终装载在神舟4号飞船上A3—2型电泳仪的电泳分离条件，通过地面和空间实验，初步探讨了微重力对连续自由流电泳分离的影响，并对电泳的分离产物做了多种检测．     

一种测量航空发动机T*4温度的新方法

采用热电偶信号放大集成电路AD595结合镍铬-镍铝热电偶温度传感器,设计了航空发动机T*4温度热电偶测温电路,实现了冷端自动补偿、热电偶断线报警信号输出功能.实测数据分析表明输出幅值大,误差小,重复性好.测量电路简单,具有较强的实用性.     

硅氮烷环体的催化聚合及热解制备Si3 N4 材料

采用甲基氢二氯硅烷的氨解产物硅氮烷环体(MHSZ)为原料,以四丁基氟化铵为催化剂,制备了高分子量的硅氮烷聚合物(PHSZ),结合红外、核磁、凝胶色谱仪和热重分析了反应时间对合成的PHSZ结构、组成、分子量和陶瓷产率的影响。考察了低温氨气,高温N2气氛处理工艺对热解产物结构和组成的影响。结果表明,随着反应时间的延长,PHSZ高聚物的分子量提高,热失重降低;采用该热解方式PHSZ可转化为含碳量仅为0.5wt%的Si3N4材料,热解样品在1 600℃时完全结晶,晶相主要是α-Si3N4。     

固体冲压发动机喷管用C/C-SiC复合材料

采用"化学气相渗透+先驱体浸渍裂解"(CVI+PIP)混合工艺制备固体冲压发动机用C/C-SiC复合材料喷管内层,综合考查复合材料的微观结构、弯曲性能和抗烧蚀性能以及固冲发动机C/C-SiC喷管内层水压和点火实验。结果表明:复合材料的弯曲强度达到197 MPa,且断裂破坏行为呈现典型的韧性模式;复合材料具有优异的抗氧化烧蚀性能,氧化烧蚀200 s后线烧蚀率仅为0.0063 mm·s-1;研制的C/C-SiC复合材料构件的水压爆破压强为6.5 MPa,表明构件具有良好的整体承载能力;C/C-SiC复合材料喷管内层高温综合性能通过了固体冲压发动机点火实验考核。     

TMS320C6678多核DSP的加载配置和实现方法

程序代码正确的固化加载运行是多核DSP应用的前提和基础.简要介绍了DSP的加载器和加载过程,阐述了多核处理器件的加载配置管理方法.以TI公司的多核DSP TMS320C6678为例,介绍了多核DSP的加载模式和流程,详细阐述了EMIF16的Nor FLASH加载实现方法,可以实现多核DSP软件的正确、可靠加载运行.     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

A statistical study of C IV regions in 20 Oe-stars

In this paper, using the Gauss-Rotation model (GR model), we analyse the UV C IV resonance lines in the spectra of 20 Oe-stars of different spectral subtypes, in order to detect the structure of C IV region. We study the presence and behavior of absorption clouds and analyse their characteristics. From this analysis we can calculate the values of a group of physical parameters, such as the apparent rotational and radial velocities, the random velocities of the thermal motions of the ions, the Full Width at Half Maximum (FWHM), the optical depth, as well as the absorbed energy and the column density of the independent regions of matter, which produce the main and the satellite clouds of the studied spectral lines. Finally, we present the relations between these physical parameters and the spectral subtypes of the studied stars and we give our results about the structure of the C IV region in their atmosphere.     

热障涂层表面裂纹水浸超声检测

为有效检测热障涂层(TBCs)表面裂纹,进行了热障涂层表面裂纹水浸超声检测技术的应用研究。以常用的大气等离子喷涂(APS)热障涂层作为试验材料,采用水浸超声检测回波声程差和C扫描图像对不同深度、宽度和长度的热障涂层表面裂纹进行了表征。结果表明:热障涂层基体材料对热障涂层表面裂纹的检测效果无明显影响;通过优化检测参数和合理选用仪器探头,利用水浸超声方法可实现对热障涂层表面深度为0.1 mm、长度为2 mm裂纹的有效检测;水浸超声检测技术可以获得裂纹的长度、深度参数,是解决热障涂层表面裂纹检测问题的有效方法。