火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用，同时还将与火星表面航天器发生对流换热。热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响，从而确定主要的控温途径。在调研火星表面辐射、大气等热环境的基础上，从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响。器表辐射传热系数随光学属性和温度的变化范围为0.3～1.4W/(m2·℃)，对流传热系数随风速变化为0.2～1.5W/(m2·℃)，器内导热传热系数可控制在0.25W/(m2·℃)以下。结果表明，太阳辐射较火星表面和天空辐射而言是主要外热源，航天器表面的辐射和对流换热为两条并联换热途径，两者均可成为主要换热途径，器内导热传热是控制航天器内外隔热的主要可控因素。     

宇航用双极器件和光电耦合器位移损伤试验研究

文章针对器件的位移损伤效应,利用质子加速器产生的质子及反应堆中子对化合物器件和硅器件位移损伤进行试验研究,得到了GaAs光电耦合器的电流传输比(CTR)和硅晶体管电流增益hFE的退化率随等效剂量的变化规律。研究结果表明,在质子70 MeV以上高能量范围,对于硅器件适用的位移损伤等效原理对于GaAs化合物器件则不再适用,需要修正。根据试验数据,给出了经验的修正系数。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

高空飞行环境中液体运载火箭底部热环境研究

采用数值模拟和飞行测试验证相结合的方法对液体运载火箭高空对流/辐射耦合换热问题开展系统深入研究。基于燃气多组分输运Navier-Stokes方程、热辐射方程、Realizable k-ε两方程湍流模型，建立了高空含自由流的运载火箭燃气喷流流动模型。辐射模型采用离散坐标法(DOM)，空间离散采用二阶迎风TVD格式，对多个典型飞行高度火箭底部热流进行大型并行计算，将数值结果与试验数据进行广泛对比，验证了计算模型的精度和有效性。数值研究表明，火箭底部辐射热流在刚起飞阶段达到最大值，随着飞行高度上升，辐射热流逐渐降低，火箭底部对流热流表现为先升高后降低的趋势，并在20 km高空达到峰值。本文的预测分析方法对液体运载火箭底部热防护设计具有重要的理论意义和工程应用价值。     

电子辐照对聚乙烯热缩套管力学性能的影响

利用45 keV,1 MeV和2 MeV电子分别对聚乙烯热缩套管进行辐照实验,研究不同能量电子辐照对聚乙烯热缩套管力学性能的影响,并分析电子辐照下材料的损伤效应机理,建立力学性能退化规律。结果表明：实验选定的3种能量电子辐照都会造成聚乙烯的降解,材料脆化产生裂纹,从而导致其力学性能下降;但是由于这3种能量电子穿透深度不同,45 keV电子只能造成聚乙烯热缩套管表层材料损伤,力学性能最大下降量只有30%~40%,而1 MeV和2 MeV电子却会导致套管力学性能完全丧失,力学性能下降接近100%。     

航空发动机燃烧室出口高温热电偶校准技术

在高温校准风洞上,对测量航空发动机燃烧室出口温度气冷式和非气冷式这两种形式的高温热电偶进行校准,确定了高温热电偶的辐射修正系数.校准实验结果表明:高温热电偶的辐射误差随气流速度和压力的增加而降低,而且气流温度与航空发动机机匣壁面温度的温差越大,辐射误差也越大.比较两种结构形式的高温热电偶,非冷却式高温热电偶的测量误差比气冷式高温热电偶的相对较小.      

高能电子对地球同步轨道卫星的影响分析

为了厘清在轨GEO(Geosynchronous Earth Orbit,地球同步轨道)卫星不时出现异常的原因,提高卫星执行任务的可靠性,首先从机理上介绍了空间环境中的地球辐射带及高能电子的情况,引出GEO卫星所处恶劣空间环境的现实;其次基于我国SEPC(Space Environment Prediction Center,国家空间环境预报中心)以及NSMC(National Satellite Meteorological Center,国家卫星气象中心)的空间环境月报资料,结合某GEO环境业务卫星故障的实际数据,经统计归纳,分析得出了地球辐射带中的高能电子是导致GEO卫星发生故障的主要原因;最后按照事例技术分析、常规按需预报和特殊情况下的实时预报等3个层次对高能电子预报方法进行了初步探讨。通过分析可以看出,为提高卫星完成任务的可靠性、降低长期管理风险,需要加强GEO卫星所处空间环境高能电子的预报工作。     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.