40G以太网在航电系统中的应用初探

随着飞机整体性能的提升，航电系统的发展日新月异，对总线网络提出了越来越高的要求。基于远端内存直接访问技术传输机制的以太网以其高带宽、低延时以及生态开放性的特点，在航电系统总线中逐渐得到推广。本文介绍了航电总线网络的发展，对典型的航电总线进行了对比分析，开展了10G/40GE交换工程样机的研制和测试工作，为下一代航电系统总线网络的选型提供了参考。     

前驱体法制备Ta4HfC5超纯超细纳米粉体

利用实验室自制铪酸酯和钽酸酯为原料,经水解缩合后得到了含铪钽元素的聚合物PHT,引入酚醛(PF)作为C源,制备了Ta_4HfC_5前驱体,经固化、高温裂解后,获得了超纯超细Ta_4HfC_5纳米粉体。通过XRD、元素分析和SEM对不同工艺条件下陶瓷产物的晶相组成和微观形貌进行了表征;对陶瓷粉体进行了粒度分析。结果表明,合成的前驱体结构稳定,常温避光储存3个月后黏度几乎没有变化,对于复材加工的工艺适应性良好。在酚醛用量3.25 wt%(以PHT质量分数100%计算)、煅烧温度为1 450℃、保温时间为1.5 h的合成条件下,可以得到纯相的Ta_4HfC_5粉体,晶粒尺寸为25～50 nm,粒径分布在100～200 nm之间,Dv(50)=136 nm。     

Green UAV communications for 6G: A survey

Unmanned Aerial Vehicles (UAVs) have received a wide range of attention for military and commercial applications. Enhanced with communication capability, UAVs are considered to play important roles in the Sixth Generation (6G) networks due to their low cost and flexible deployment. 6G is supposed to be an all-coverage network to provide ubiquitous connections for space, air, ground and underwater. UAVs are able to provide air-borne wireless coverage flexibly, serving as aerial base stations for ground users, as relays to connect isolated nodes, or as mobile users in cellular networks. However, the onboard energy of small UAVs is extremely limited. Thus, UAVs can be only deployed to establish wireless links temporarily. Prolonging the lifetime and developing green UAV communication with low power consumption becomes a critical challenge. In this article, a comprehensive survey on green UAV communications for 6G is carried out. Specifically, the typical UAVs and their energy consumption models are introduced. Then, the typical trends of green UAV communications are provided. In addition, the typical applications of UAVs and their green designs are discussed. Finally, several promising techniques and open research issues are also pointed out.     

Robust trajectory planning for UAV communication systems in the presence of jammers

Unmanned Aerial Vehicle (UAV) has emerged as a promising novel application for the Sixth-Generation (6G) wireless communication by leveraging more favorable Line-of-Sight (LoS) propagation. However, the jamming resistance by exploiting UAV’s mobility is a new challenge in the UAV-ground communication. This paper investigates the trajectory planning problem in an UAV communication system, where the UAV is operated by a Ground Control Unit (GCU) to perform certain tasks in the presence of multiple jammers with imperfect power and location information. To ensure the reliability of the GCU-to-UAV link, we formulate the problem as a non-convex semi-infinite optimization, aiming to maximize the average worst-case Signal-to-Interference-plus-Noise Ratio (SINR) over a given flight duration by designing the robust trajectory of the UAV under stringent energy availability constraints. To handle this problem efficiently, we develop an iterative algorithm for the solution with the aid of S-procedure and Successive Convex Approximation (SCA) method. Numerous results demonstrate the efficacy of our proposed algorithm and offer some useful design insights to practical system.     

Hardware qualification for scientific ballooning missions

The European Stratospheric Balloon Observatory (ESBO) initiative aims at simplifying the access to stratospheric balloon missions. We plan to provide platforms and support with instrument design in order to support scientists. During the design process, the inevitable question of qualification for the harsh flight conditions arises. Unfortunately, there is no existing standard for qualification of stratospheric ballooning hardware. Thus, we developed a qualification procedure for use within ESBO and similar projects.In this paper, we present our analysis of the environmental conditions in the stratosphere. While conditions at typical balloon float altitudes are similar to the space environment, there are also some relevant differences. For example, the thermal environment is dominated by radiation and thermal conduction, but the remaining atmosphere still supports a certain amount of convection. The remaining atmospheric pressure in the stratosphere also leads to reduced arcing distances. Vibrational loads are far less than for space missions, but quasi-static or shock loads may occur. The criticality of radiation increases with mission duration.Based on the environmental conditions, we present the qualification procedures for ESBO, which are based on the European Cooperation for Space Standardization (ECSS) standards for space systems. Overtesting against too high requirements leads to overengineering, driving mission cost and mitigating the advantages of balloons over space missions. Therefore, we modified the ECSS standards to fit typical scientific ballooning missions over several days at altitudes up to 40 km. Furthermore, we analyzed design rules for space systems with regard to their relevance for scientific ballooning, including material and component selection. We present the experience from the hardware qualification process for the ESBO prototype STUDIO (Stratospheric UV Demonstrator of an Imaging Observatory). Even though boundary conditions are different for each individual mission, we aimed for a broader approach: We investigated more general requirements for scientific ballooning missions to support future flights.     

激光熔化沉积15-5PH沉淀硬化不锈钢组织及拉伸性能

利用激光熔化沉积技术制备15-5PH沉淀硬化不锈钢板,利用金相显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、电子探针(EPMA)技术,对沉积态组织进行分析,测试沉积态组织的室温拉伸性能。结果表明:激光熔化沉积15-5PH不锈钢沉积态组织由沿沉积增高方向贯穿多层外延生长的柱状晶组成,柱状晶内包含多个细长整齐排列的胞状树枝晶,枝晶内为马氏体组织,枝晶间为铁素体;沉积态组织中弥散分布大量细小的NbC析出相,尺寸12～20 nm;15-5PH不锈钢沉积态组织具有良好的力学性能,纵向抗拉强度和延伸率分别为1 128.5 MPa和14.0%,横向抗拉强度和延伸率分别为1 101 MPa和12.25%。     

Comprehensive evaluation of Satellite-Based and reanalysis precipitation products over the Mediterranean region in Turkey

Precipitation is an important component of the hydrological and energy cycles, as well as a key input parameter for many applications in the fields of hydrology, climatology, meteorology, and weather forecasting research. As a result, estimating precipitation accurately is critical. The purpose of this research is to conduct a comprehensive and comparative evaluation of grid-based precipitation products over Turkey's Mediterranean region from 2017 to 2021 at monthly and grid scales, using data from 193 ground-based meteorological stations as a reference. PERCIANN CCS, PDIR-Now, GSMaP MVK, PERSIANN CDR, CHIRPS, IMERG v6, GSMaP Gauge, and ERA5 are the eight grid-based precipitation products. Several prospective were used to evaluate the products, including magnitude agreement with gauge stations for the entire region and the six hydrological sub-basins included in the region, performance in capturing various intensity categories, and elevation dependency. According to the evaluation results, PERCIANN CDR, CHIRPS, IMERG v6, GSMaP Gauge, and ERA5 performed well in all evaluation aspects, whereas PERCIANN CCS, PDIR-Now, and GSMaP MVK performed poorly in all metrics. The majority of the products underestimated heavy rainfall events, while all products performed better at low and moderate precipitation events. As a result, the products performed better in the summer and spring months (March to October) than in the winter months (December to February). Furthermore, the results showed that the performance of the majority of the products degraded for elevations greater than 1000 m. The evaluation suggests that PERSIANN CDR, CHIRPS, IMERG v6, GSMaP Gauge, and ERA5 can be used as good precipitation data sources and as a complement to ground-based meteorological stations in Turkey's Mediterranean region.     

从事故角度浅谈飞机结构设计理念及规章

2017年交通部发布了《CCAR121大型飞机公共航空运输承运人运行合格审定规则》R5版本，其中维修体系的主要变动为附件J：持续适航和安全改进，民航局审定司同时发布/修订了8个相应咨询通告。其中重点规章为《AC-121-FS-2018-71修理和改装的损伤容限检查要求》。通过民航史上关键事故，介绍并阐述规章和咨询通告中“安全寿命”、“损伤安全”和最终发展为“损伤容限”的历史及落实到附件J和咨询通告的相应条款，为业内人员提供借鉴，加深对于飞机结构安全设计理念和规章理解。     

5G技术在航空制造领域的应用研究

第五代移动通信(5G)作为下一个万亿元规模的战略性新兴产业,已引起全球各国的广泛重视和竞相角逐。5G技术的意义不仅限于提升传输速率,同时也将丰富各类场景应用,为各行各业的数字化转型提供通信技术支持。梳理了5G技术在航空制造业的具体应用和影响。可以预见,在不远的将来,5G将有力引领航空制造业的转型和升级。     

5G微基站环境下GNSS接收机性能及观测质量分析

我国已全面进入5G时代，为研究5G微基站电磁环境对全球卫星导航系统（GNSS）接收机工作性能及观测数据质量的影响，基于自主建设差分基准站的零基线观测数据，采用静态相对定位方法，通过观测数据质量分析、载波与伪距的双差残差序列、对比相对静态定位结果，综合评估5G微基站对GNSS接收机工作性能及观测数据质量的影响。实验表明：当前环境下，GNSS差分基准站及接收机处于近距离建设的5G微基站时，载波相位观测噪声变化范围为5cm，伪距观测噪声变化范围为15cm，零基线测试结果变化范围为1mm。在实验距离内，5G微基站对于GNSS接收机工作性能及数据观测质量影响较小，可以忽略。