电沉积自润滑复合镀层工艺研究

本文报道了金-氟化石墨自润滑复合镀层的电沉积工艺和影响复合镀层中氟化石墨含量的主要因素,并成功地研究出“HA-2”共沉积促进剂。 金-氟化石墨复合镀层的自润滑的程度,决定于复合镀层中氟化石墨的含量,可根据需要控制溶液中“HA-2”共沉积促进剂含量和pH值,来调节氟化石墨的含量,满足不同润滑要求。 金-氟化石墨自润滑复合镀层,在高低温使用环境条件下均具有优良的自润滑性能、电性能和可焊性能,并且不产生挥发物和污染物,是接插件、减磨器件比较理想的自润滑镀层。     

碱性体系锌—镍合金电沉积的研究

本文介绍了一种新型的碱性体系锌-镍合金电镀工艺。本工艺镀层光亮、镀液稳定、组成简单及维护方便,能在很宽的工艺范围下能镀出含镍量为11～15％的锌-镍合金。镀层具有高耐蚀性及低氢脆性。对电沉积机理也作了必要叙述。     

电镀砂轮磨损对GH4169磨削表面完整性的影响

电镀砂轮具有优异的成型性和形状保持能力,越来越广泛地应用于复杂曲面的加工,但是磨损对零件表面完整性影响的研究并不充分.在深入分析利用圆环型砂轮在插磨方式下加工GH4169试件所产生的表面形貌形成规律的基础上,对高刚度矩形试件的磨削表面粗糙度随砂轮磨削量的变化进行了详细记录,并对某型号发动机静子叶片进行实际磨削验证.试验结果表明,精磨时适当的砂轮磨损可以使高刚度试件表面粗糙度下降35％,对表面硬度和残余应力影响不大;而叶片的弱刚度会大幅提高磨削粗糙度,但适当的砂轮磨损可以使叶片端部粗糙度下降64％,并降低刚度对粗糙度的影响,进而提高叶片表面磨削质量的一致性.因此,通过磨削粗糙度对砂轮的磨损状况进行大致评估,选择合适磨损量的砂轮用于精加工,以充分降低工件的表面粗糙度并提高磨削质量的一致性.     

合金镀层组成与电镀工艺规范关系的研究

文章论述合金电镀的金属共沉积原理;合金镀层组成与反应速度的关系;合金镀层组成与镀液组成的关系;推导出关系式,为工艺研究和生产提供一些理论依据。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Grinding performance evaluation of porous composite-bonded CBN wheels for Inconel 718

For high-efficiency grinding of difficult-to-cut materials such as titanium and nickel alloys, a high porosity is expected and also a sufficient mechanical strength to satisfy the function.However, the porosity increase is a disadvantage to the mechanical strength. As a promising pore forming agent, alumina bubbles are firstly induced into the abrasive layer to fabricate porous cubic boron nitride（CBN） wheels. When the wheel porosity reaches 45%, the bending strength is still high up to 50 MPa with modified orderly pore distribution. A porous CBN wheel was fabricated with a total porosity around 30%. The grinding performance of the porous composite-bonded CBN wheel was evaluated in terms of specific force, specific grinding energy, and grinding temperature, which were better than those of the vitrified one under the same grinding conditions. Compared to the vitrified CBN wheel, clear straight cutting grooves and less chip adhesion are observed on the ground surface and there is also no extensive loading on the wheel surface after grinding.     

大功率可控整流器的改进

介绍了采用双整流变压器进行可控整流，可降低电镀电源的纹波系数，提高电镀电源技术性能。     

单层超硬磨料砂轮制造技术新发展

概述了国外单层高温钎焊超硬磨料砂轮的工艺优势及主要研究成果，这种新型超硬磨料砂轮以其卓越的磨削性能已在国内外磨削界引起了轰动，它在今后逐步替代传统砂轮应是一种无法抗拒的必然趋势。鉴于它极其广阔的应用前景，国内在推广应用超硬磨料砂轮时也必将大力引进开发此种单层钎焊砂轮。为使国内开发钎焊砂轮有一个更高的起点，作者提出了关于开展这一领域研究的若干构想和实施方案     

TC4钛合金材料采用金刚石砂轮磨削时的工艺参数优化

钛合金材料在航空器和发动机中的应用极为广泛,涡扇发动机中低压压气机静子叶片基本由钛合金材料制成,由于钛合金的磨削性能较差,对选用金刚石砂轮进行钛合金材料磨削时的主要工艺影响因素（如进给速度、磨抛深度等）进行了试验分析,优选出更适用于金刚石砂轮磨削钛合金的工艺参数,该参数不仅能够用于自研的双面仿形抛修设备,还可以对其他型号磨床磨削钛合金材料时的工艺参数选择提供指导。