利用反射式衍射光栅进行瞬态应变测量

介绍了利用反射式衍射光栅进行瞬态应变测量的方法,在一维细长杆中,通过测量杆未端的绝对速度,就可以算出动态应变和应变灵敏度系数K,文章对该方法进行了理论计算和实验结果分析,给出了结论和进一步研究方向。     

参数估计对激光脉冲法热损失修正的计算及验证

描述了参数估计在激光脉冲法测量热扩散率中应用的基本原理,研究了试验过程中热损失对试样背面温升的影响,计算了热扩散率、热损失系数和能量系数的敏感性系数,依据单纯形搜索法原理,采用MATLAB软件对试验数据进行了参数估计运算,并验证其可行性.     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

基于ERSM涡轮盘径向变形的非线性动态概率分析

为了准确设计高压涡轮盘和叶尖间隙,从概率的角度进行了涡轮盘径向变形的分析。介绍了高精度高效率的非线性动态概率分析的极值响应面方法 (Extremum Response Surface Method,ERSM),并建立了其数学模型。考虑材料属性和边界条件的非线性,以及热载荷和离心载荷的动态性,基于ERSM对涡轮盘径向变形进行了非线性动态概率分析,得到了输入输出参数的分布特征和影响涡轮盘径向动态变形的主要因素。最后,通过方法比较,验证了ERSM在保证计算精度的前提下能大大提高计算速度,节约计算时间,改善计算效率。为进行更有效的涡轮盘设计和优化,改善叶尖间隙设计和控制的合理性提供了有效依据。     

考虑跟踪制导的小天体着陆轨迹闭环优化方法

针对小天体着陆环境存在参数不确定性及初始状态偏差的特点,提出一种小天体着陆闭环优化方法,实现在节省燃料消耗的同时降低对参数的敏感度。首先,建立小天体着陆动力学模型,分析了燃料最优着陆问题;然后,采用线性二次型调节器设计了反馈制导律,推导闭环敏感度矩阵方程,构造燃料消耗和敏感度加权的性能指标,进而能够通过优化降低小天体着陆过程的敏感度。仿真结果表明,该闭环优化方法能有效降低对参数不确定性和初始状态偏差的敏感度,最终达到提高小天体着陆位置和速度精度的目标。     

射频干扰对InSAR干涉处理的影响分析

窄带干扰是低频段InSAR系统面临的主要射频干扰之一,它的存在会对干涉相位产生严重影响,进而导致高程反演误差。本文推导了窄带干扰影响下的InSAR干涉相位的解析表达式,给出了干涉相位对窄带干扰各参数的敏感度方程,仿真分析了窄带干扰对P波段InSAR系统干涉处理的影响。结果表明,窄带干扰经过成像后其幅度调制函数近似为方位时间的sinc函数,在SAR图像中表现为沿距离向的干扰条带。干涉相位对窄带干扰信号的功率较敏感,对其频率较不敏感,干涉相位和高程反演误差随着干信比的增加而增加。     

Reliability and global sensitivity analysis for an airplane slat mechanism considering wear degradation

This paper focuses on the issue of reliability and global sensitivity analysis for an airplane slat mechanism considering the uncertainties in the wear process of mechanical components. First, the multi-body kinematic model of the slat mechanism is built in the ADAMS software. The geometrical sizes of the roller wheels after wear degradation are considered as input variables and the angle the slat should turn is considered as the output response. To accurately identify the influential roller wheels to the reliability and robustness of the slat mechanism, the failure probability based sensitivity and variance-based sensitivity indices are introduced. Comprehensive analysis of the results have shown that the reliability analysis and global sensitivity theory can help engineers find significant parts by their contributions, thus provide guidance for mechanical design and maintenance.     

Design of nanofluid-cooled heat sink using topology optimization

The paper presented topology optimization of 2D and 3D Nanofluid-Cooled Heat Sink (NCHS). The flow and heat transfer problem in the NCHS was treated as a single-phase nanofluid based convective heat transfer model. The temperature-dependent fluid properties were taken into account in the model due to the strong temperature-dependent features of nanofluids. An average temperature minimum problem was studied subject to the fluid area and energy dissipation constraints by using the density method. In the method, the design variable is updated according to the gradient information obtained by an adjoint based sensitivity analysis process. The effects of the energy dissipation constraint, temperature-dependent fluid properties and nanofluid characteristics on optimal configurations of NCHS were numerically investigated with following conclusions. Firstly, branched flow channels in the optimal configuration increased with the rise of the allowed energy dissipation. Secondly, temperature-dependent fluid properties were significant for obtaining the appropriate optimal results with best cooling performance. Thirdly, heat transfer performances of optimal configurations were enhanced by reducing the nanoparticle diameter or increasing the nanoparticle volume fraction. Fourthly, the optimal configuration for nanofluid had better cooling performance than that for its base fluid.     

单航过单平台InSAR基线模型的敏感性分析

从单航过单平台InSAR系统对其自身基线的高精度需求出发,给出了光学测量方案下的基线模型,并针对模型中的各因素及其误差来源,进行了模型的敏感性分析,阐明了测量元素与位置修正矢量的基线矢量的误差传递关系,然后根据误差传递关系找出测量系统的优化安装部位。通过解析推导得出各类误差源在不同条件下对基线精度影响的理论结果,由仿真分析给出了不同安装部位的误差传递系数。通过敏感性分析可由测量环境的输入条件直接获得基线的误差量级,其结果可作为指导测量系统方案设计与精度分配的参考依据。     

Optimization on conventional and electric air-cycle refrigeration systems of aircraft: A short-cut method and analysis

The air-cycle refrigeration system is widely used in commercial and military aircraft, and its efficiency greatly affects aircraft performance. Nowadays, this system requires a more efficient design and optimization method. In this paper, a short-cut optimization method with high efficiency and effectiveness is introduced for both conventional and electric air-cycle refrigeration systems. Based on the system characteristics, a four-layer parameter matching algorithm is designed which avoids computational difficulty caused by simultaneous equations. Fuel penalty is chosen as the objective function of optimization; design variables are reduced based on sensitivity analysis to improve optimization efficiency. The results show that the 3-variable optimization of the conventional air-cycle refrigeration system can obtain almost the same results as the traditional 6-variable optimization in that these two optimizations can both significantly reduce the fuel penalty. However, the computer running time of the 3-variable optimization is much shorter than that of the 6-variable optimization. The optimal fuel penalty of the electric air-cycle refrigeration system is lower than that of the conventional one. This study can provide reference for optimizing the air-cycle refrigeration system of aircraft.