Reliability and global sensitivity analysis for an airplane slat mechanism considering wear degradation

This paper focuses on the issue of reliability and global sensitivity analysis for an airplane slat mechanism considering the uncertainties in the wear process of mechanical components. First, the multi-body kinematic model of the slat mechanism is built in the ADAMS software. The geometrical sizes of the roller wheels after wear degradation are considered as input variables and the angle the slat should turn is considered as the output response. To accurately identify the influential roller wheels to the reliability and robustness of the slat mechanism, the failure probability based sensitivity and variance-based sensitivity indices are introduced. Comprehensive analysis of the results have shown that the reliability analysis and global sensitivity theory can help engineers find significant parts by their contributions, thus provide guidance for mechanical design and maintenance.     

射频干扰对InSAR干涉处理的影响分析

窄带干扰是低频段InSAR系统面临的主要射频干扰之一,它的存在会对干涉相位产生严重影响,进而导致高程反演误差。本文推导了窄带干扰影响下的InSAR干涉相位的解析表达式,给出了干涉相位对窄带干扰各参数的敏感度方程,仿真分析了窄带干扰对P波段InSAR系统干涉处理的影响。结果表明,窄带干扰经过成像后其幅度调制函数近似为方位时间的sinc函数,在SAR图像中表现为沿距离向的干扰条带。干涉相位对窄带干扰信号的功率较敏感,对其频率较不敏感,干涉相位和高程反演误差随着干信比的增加而增加。     

悬臂空心梁式加速度计的设计

分析证明:悬臂梁式加速度计的灵敏度与它的谐振频率的平方成反比。因此,欲展宽频带而保持灵敏度不变就很困难。利用应力集中的方法可以有效地解决这一问题。采用空心梁结构不仅能产生应力集中而且能减少梁的自身质量带来的影响,可以有效地展宽频带。文中给出了几种梁的刚度计算。     

混合移频静刚度法和直接扰动迭代法

本文对混合移频动柔度法的失代式进行等价变换，从而得到一个“变种”，该变种不包含混合移频系统的动柔度式F^△（λ*），这便消除了F^△（λ*）带来的近似性，另外，对直接扰动法也进行等价变换，引出可以省时地用于许多特征向量导数计算的直接扰动迭代法。最后，为了供读者参数，本文还导出了三种混合移频动柔度法的非迭代式，其中有两种恰好是另外两种动柔度法经混合移频后的非迭代式，这实际上已将另两种动柔度法也扩展到密集根情况了。     

基于拓扑优化的航空发动机滑油箱支架设计

支架是航空发动机滑油箱组件中的重要部件,用于连接和固定滑油箱组件中的箍带。但现有支架设计会引起与之相连的箍带承受偏心拉力,导致结构应力水平偏高进而发生疲劳破坏。本文提出了一种考虑结构局部刚度的拓扑优化方法,能够在提升支架整体刚度的同时兼顾局部刚度,使支架的刚度分布更加合理,进而显著降低与之相连的箍带的应力水平。利用该优化方法优化后的支架结构质量与初始结构相同,最大形变量降低了17.7%,与之相连的箍带结构不再受偏心拉力,应力分布更为均匀,最大应力降低了30.84%,验证了考虑结构局部刚度的拓扑优化方法在支架结构设计中的有效性。     

2.5维编织树脂基复合材料平板多尺度动力学模型修正

在2.5维编织树脂基复合材料多尺度固有振动分析的基础上,开展基于实测结构模态数据的复合材料平板动力学模型修正研究,以获取精准反映其动力学特性的模型。首先,建立复合材料平板固有频率对弹性参数的灵敏度分析方法,分析了平板固有振动特性的主要影响因素;其次,建立基于灵敏度分析的复合材料多尺度动力学模型修正方法,形成了基于MSC.NASTRAN平台的模型修正程序。最后,利用实测结构模态测试数据,实现对复合材料平板动力学模型的修正。结果表明,对关键弹性参数进行修正后,不同边界条件和纱线走向的复合材料平板试验件固有频率实测数据与仿真数据的最大误差由10.44%下降至2.39%,相关性得到了大幅改善。此外,所提出的自由模态测试方案结合动力学模型修正方法,为复合材料等效弹性参数的试验辨识提供了新的技术途径。     

利用反射式衍射光栅进行瞬态应变测量

介绍了利用反射式衍射光栅进行瞬态应变测量的方法,在一维细长杆中,通过测量杆未端的绝对速度,就可以算出动态应变和应变灵敏度系数K,文章对该方法进行了理论计算和实验结果分析,给出了结论和进一步研究方向。     

参数估计对激光脉冲法热损失修正的计算及验证

描述了参数估计在激光脉冲法测量热扩散率中应用的基本原理,研究了试验过程中热损失对试样背面温升的影响,计算了热扩散率、热损失系数和能量系数的敏感性系数,依据单纯形搜索法原理,采用MATLAB软件对试验数据进行了参数估计运算,并验证其可行性.     

双喷管差动式小推力测量装置的设计与分析

为了研究喷管型面对小推力火箭发动机推力性能的影响,设计并建设了双喷管差动式小推力测量装置及其附属设备.在测量装置中,基准喷管和待测喷管同轴反向设置,通过测量结构应变来直接测量两个喷管的推力差.对测量装置进行了简化模型理论分析,导出其灵敏系数理论公式.依据该公式进行关键参数设计,确定合理的灵敏系数,指导试验系统设计,以保证测量精度.验证性试验表明测量装置可以测量牛级推力差,标定曲线线性较好,以基准喷管推力作为比较对象,推力差的相对扩展不确定度为0.5％.推力差与基准喷管推力的比值越小,以基准喷管推力为比较对象的相对测量不确定度越小.测量装置可以用于小推力火箭发动机喷管性能分析及优化的试验研究.     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.