基于三维裂纹尖端应力场的应力强度因子计算方法

提出一种基于无限大体裂纹尖端弹性应力场理论解的前几项多项式函数,对实际裂纹体弹性应力场有限元解进行拟合来计算应力强度因子的方法.该方法在计算应力强度因子时不需要预先假设裂纹尖端的应力应变状态,应力强度因子计算结果更符合三维裂纹体裂纹尖端实际的应力应变状态.首先基于二维无限大板中心穿透裂纹应力场理论解验证了方法的有效性,探讨了拟合确定应力强度因子需要的多项式应力函数的项数.然后分别以二维大板中心穿透裂纹、三维大体内埋圆裂纹和三维有限厚板中心穿透裂纹的应力强度因子计算为例,通过与无限大板和无限大体应力强度因子理论解以及基于位移外推法和1/4节点张开位移法的应力强度因子有限元解的对比分析,验证了该方法的有效性和合理性.研究表明该方法能够合理反映三维裂纹体裂纹尖端的实际应力应变状态,计算得到的应力强度因子数值更合理.      

热等静压工艺制备的Ti-6Al-4V薄壁筒的切削加工

为了能够提高钛合金薄壁筒的加工效率,利用热等静压工艺制备了两个具有不同结构的Ti-6Al-4V薄壁筒,研究了夹具、填充泥浆和筒结构对Ti-6Al-4V薄壁筒的外圆表面粗糙度和精度的影响。结果显示,Ti-6Al-4V热等静压薄壁筒经过切削加工能够达到精度要求,填充泥浆降低了弹性回弹,提高了薄壁筒外圆精度;筒结构的内圆环和粗大端能够提高刚度,有效降低了外圆表面粗糙度值;夹具尺寸误差对圆度和同轴度影响较大,较大的尺寸误差显著降低了筒的外圆精度。     

基于传热反问题方法的N_2O/C_2H_4预混推进剂燃烧室热流测量研究

测量液体火箭发动机的热载荷是获取燃烧室内部信息的重要方法。为了获取N_2O/C_2H_4预混推进剂燃烧室内壁的热载荷,建立了液体火箭发动机的热流计算的反问题方法,该方法基于对燃烧室壁面温度场的直接求解,通过对轴向多个位置测量温度的反演计算得到燃烧室内壁热流和温度。研究表明:应用文中建立的传热反问题方法能够较为准确地获得热流随时间及空间的分布;热电偶的位置对计算准确性有明显的影响,与理论深度偏差在0.2mm以内的随机深度偏差可导致超过4%热流反演误差;N_2O/C_2H_4预混推进剂燃烧室热流及温度沿轴向逐渐降低,表明燃烧室内的反应释热过程主要在燃烧室头部附近发生。     

The Primordial Helium-4 Abundance from Observations of a Large Sample of Blue Compact Dwarf Galaxies

We use a sample of 45 low-metallicity H II regions in blue compact dwarf (BCD) galaxies to determine the primordial helium abundance YP with a precision better than 5%. We have carefully investigated the physical effects which may make the He I line intensities deviate from their recombination values such as collisional and fluorescent enhancements, underlying He I stellar absorption and absorption by Galactic interstellar Na I. By extrapolating the Y vs. O/H and Y vs. N/H linear regressions to O/H = N/H = 0, we obtain YP = 0.244±0.002 and 0.245±0.001, respectively, higher than previous determinations (YP = 0.230 - 0.234). Part of the difference comes from the fact that previous investigators have not taken into account underlying He I stellar absorption, especially in the NW component of the BCD I Zw 18 which, because of its extremely low metallicity plays a key role in the determination of YP. We derive a slope dY/dZ = 2.3±1.0, considerably smaller than those derived before. With this smaller slope and taking into account the errors, chemical evolution models with an outflow of well-mixed material can be built for star-forming dwarf galaxies which satisfy all the observational constraints. Our YP gives _bh ₅₀ ² = 0.058±0.007,f consistent with the lower limit set by dynamical measurements and X-ray observations of clusters of galaxies. It is also consistent, within the framework of standard big bang nucleosynthesis theory, with measurements of primordial 7Li in galactic halo stars and with the D/H abundance measured in absorption systems toward quasars by Burles and Tytler (1997).     

TC4钛板飞行器蒙皮零件热校形研究

论述了金属板料热校形机理一一主要是高温下应力松驰及材料的高温软化效应．并根据此原理对某飞行器TC4钛板零件进行热校形，其校形结果达到预期效果。     

着陆姿态对地外天体表层采样的影响研究

表层采样技术是获得地外天体特性的重要手段,是完成地外天体采样任务的一项关键技术。文章结合4自由度表层采样装置的特点,建立了表层采样装置的逆运动学模型,分析了极限着陆姿态下表层采样装置安装位置在当地参考坐标系中的变化,并针对一次封装与二次封装过程中表层采样装置的位置和姿态要求,明确了末端采样器姿态补偿方法,提出了着陆姿态对表层采样影响的分析算法。仿真结果表明,该算法能有效分析着陆姿态对表层采样的影响,可为表层采样装置适应性设计提供支持。     

表面处理对17-4PH不锈钢抗固体粒子冲蚀性能的影响

为对比研究表面处理对17-4PH不锈钢抗固体粒子冲蚀性能的影响,在17-4PH不锈钢表面进行了多弧离子镀陶瓷/金属多层膜制备、激光表面合金化(LSA)处理和超音速火焰喷涂(HVOF)硬质合金层处理,利用划痕仪、自组装的不锈钢抗固体粒子冲蚀(SPE)装置、多冲疲劳试验机对上述三种表面处理试样的小攻角和大攻角SPE失效行为和机理进行了研究。结果表明,微切削是17-4PH不锈钢及其表面改性试样小攻角下固体粒子冲蚀破坏的主要失效机制,多冲型疲劳破坏是17-4PH不锈钢及其表面改性试样大攻角下固体粒子冲蚀的主要失效机制。HVOF WC-17Co涂层可显著提高17-4PH不锈钢30°小攻角和90°大攻角下SPE抗力。激光表面合金化层能够改善17-4PH不锈钢抗30°小攻角和90°大攻角下SPE性能,但SPE性能改善效果弱于HVOF喷涂涂层。TiAl N/Ti多层膜不能显著提高17-4PH不锈钢抗30°小攻角和90°大攻角的SPE性能。     

页轮干式磨削Ti6Al4V合金

进行了Ti6A14V合金锆刚玉页轮和碳化硅页轮的磨削性能试验研究，分析了磨削用量对磨削力、磨削温度和磨削表面完整性的影响。磨削力通过KISTLER9265B测力仪测定，磨削表面温度由NIUSB-621X信号采集系统测得，磨削表面形貌和金相组织由HiroxKH-7700型体视显微仪和Quanta200型扫描电镜（SEM）观察，表面粗糙度由Mahr Perthometer M1粗糙度仪测得，表层显微硬度通过HVS—1000硬度计测定。研究结果表明：页轮磨削钛合金工件表面没有发生烧伤现象，磨削热影响区厚度小于50μm，锆刚玉页轮比碳化硅页轮更适合干式磨削钛合金。     

基于均匀化方法的轴编C/C复合材料性能预测

把均匀化理论与有限元法相结合,应用于轴棒法多维编织C/C复合材料的性能预测,通过对该材料有效模量的计算和实验验证,表明本方法可以得到较准确的材料刚度性能,为该材料的设计提供了性能预测方法.     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.