Combination probe for hi-frequency unsteady aerodynamicmeasurements

A combination probe for time-resolved measurements of unsteady compressible flows in transonic wind tunnels is described. The probe measures stagnation (total) temperature and pressure, static pressure, and flow angles in two planes. From these, the fluctuating mass flux, Mach number, and velocity, as well as their components in three directions, can be deduced. The combination probe consists of a dual hot-wire aspirating temperature and pressure probe mounted piggyback with a high-frequency angle probe. The angle probe has four surface-mounted silicon pressure sensors. A scheme for retrieving from the four pressure signals the stagnation and static pressures. Mach number, and flow angles in two planes, is described. The calibrations forming the base for this procedure, obtained from steady-state tests, are given. Typical data obtained in the Karman vortex street shed from a cylinder and at the exit of a Mach 0.4 air jet are presented     

Project Catch: A space based solution to combat illegal,unreported and unregulated fishing: Part I: Vessel monitoring system

Space assets have a unique opportunity to play a more active role in global resource management. There is a clear need to develop resource management tools in a global framework. Illegal, Unregulated and Unreported (IUU) fishing is placing pressure on the health and size of fishing stocks around the world. Earth observation systems can provide fishery management organizations with cost effective monitoring of large swaths of ocean. Project Catch is a fisheries management project based upon the complimentary, but independent Catch-VMS and Catch-GIS systems. Catch-VMS is a Vessel Monitoring System with increased fidelity over existing offerings. Catch-GIS is a Geographical Information System that combines VMS information with existing Earth Observation data and other data sources to identify Illegal, Unregulated and Unreported (IUU) fishing. Project Catch was undertaken by 19 Masters students from the 2010 class of the International Space University. In this paper, the space-based system architecture of Project Catch is presented and analyzed. The rationale for the creation of the system, as well as the engineering trade-off studies in its creation, are discussed. The Catch-VMS proposal was envisaged in order to address two specific problems: (1) the expansion of illegal fishing to high-latitude regions where existing satellite systems coverage is an issue and (2) the lack of coverage in remote oceanic regions due to reliance on coastal-based monitoring. Catch-VMS utilizes ship-borne transponders and hosted-payload receivers on a Global Navigation Satellite System in order to monitor the position and activity of compliant fishing vessels. Coverage is global and continuous with multiple satellites in view providing positional verification through multilateration techniques. The second part of the paper briefly describes the Catch-GIS system and investigates its cost of implementation.     

Design,Development, Implementation,and On-orbit Performance of the Dynamic Ionosphere CubeSat Experiment Mission

Funded by the NSF CubeSat and NASA ELaNa programs, the Dynamic Ionosphere CubeSat Experiment (DICE) mission consists of two 1.5U CubeSats which were launched into an eccentric low Earth orbit on October 28, 2011. Each identical spacecraft carries two Langmuir probes to measure ionospheric in-situ plasma densities, electric field probes to measure in-situ DC and AC electric fields, and a science grade magnetometer to measure in-situ DC and AC magnetic fields. Given the tight integration of these multiple sensors with the CubeSat platforms, each of the DICE spacecraft is effectively a “sensor-sat” capable of comprehensive ionospheric diagnostics. The use of two identical sensor-sats at slightly different orbiting velocities in nearly identical orbits permits the de-convolution of spatial and temporal ambiguities in the observations of the ionosphere from a moving platform. In addition to demonstrating nanosat-based constellation science, the DICE mission is advancing a number of groundbreaking CubeSat technologies including miniaturized mechanisms and high-speed downlink communications.     

Modeling and simulation of spacecraft power systems

Modeling of a complete spacecraft power processing system is presented, using the Boeing EASYS software. Component models are developed, and several system models including a solar array switching system, a partially shunted solar system, and cosmic background explorer (COBE) system are simulated. The modes of operation of the power system, such as shunt mode, battery-charge mode, and battery-discharge mode, are simulated for a complete orbit cycle     

Ultrastructural and geochemical characterization of Archean-Paleoproterozoic graphite particles: implications for recognizing traces of life in highly metamorphosed rocks

Abundant graphite particles occur in amphibolite-grade quartzite of the Archean-Paleoproterozoic Wutai Metamorphic Complex in the Wutaishan area of North China. Petrographic thin section observations suggest that the graphite particles occur within and between quartzite clasts and are heterogeneous in origin. Using HF maceration techniques, the Wutai graphite particles were extracted for further investigation. Laser Raman spectroscopic analysis of a population of extracted graphite discs indicated that they experienced a maximum metamorphic temperature of 513 +/- 50 degrees C, which is consistent with the metamorphic grade of the host rock and supports their indigenicity. Scanning and transmission electron microscopy revealed that the particles bear morphological features (such as hexagonal sheets of graphite crystals) related to metamorphism and crystal growth, but a small fraction of them (graphite discs) are characterized by a circular morphology, distinct marginal concentric folds, surficial wrinkles, and complex nanostructures. Ion microprobe analysis of individual graphite discs showed that their carbon isotope compositions range from -7.4 per thousand to -35.9 per thousand V-PDB (Vienna Pee Dee Belemnite), with an average of -20.3 per thousand, which is comparable to bulk analysis of extracted carbonaceous material. The range of their size, ultrastructures, and isotopic signatures suggests that the morphology and geochemistry of the Wutai graphite discs were overprinted by metamorphism and their ultimate carbon source probably had diverse origins that included abiotic processes. We considered both biotic and abiotic origins of the carbon source and graphite disc morphologies and cannot falsify the possibility that some circular graphite discs characterized by marginal folds and surficial wrinkles represent deflated, compressed, and subsequently graphitized organic-walled vesicles. Together with reports by other authors of acanthomorphic acritarchs from greenschist-amphibolite-grade metamorphic rocks, this study suggests that it is worthwhile to examine carbonaceous materials preserved in highly metamorphosed rocks for possible evidence of ancient life.     

Modeling the protection system components of the space stationelectric power system

To facilitate protection system studies on the space station electric power system, there is a need to develop a model that can accurately and conveniently simulate both the power system and the protection system. Models for two major protective devices, the remote bus isolator and the remote power controller, are described. These models have been installed in a power system model resembling one channel of the space station power system. The usefulness of these models in protection system studies Is demonstrated     

High-frequency AC power distribution in Space Station

A utility-type, 20-kHz, AC power distribution system for the space station employing resonant power-conversion techniques is presented. The system converts raw DC voltage from photovoltaic cells or three-phase, low-frequency AC voltage from a solar dynamic generator into a regulated, 20-G kHz AC voltage for distribution among various loads. Operations of the components of the system such as driver inverter, DC receiver, bidirectional receiver, and three-phase AC receiver are discussed. EASY5 computer modeling and simulations were performed to study the local and global performance of the system. Simulation results show that the system has fast response and good transient behavior. The AC bus voltage is effectively regulated using the phase-control scheme, which is demonstrated with both line and load variations. The feasibility of paralleling the outputs of driver modules is illustrated with the driver modules synchronized and sharing a common feedback loop. A high-frequency, sinusoidal AC voltage is generated in the three-phase, AC input case, when the driver modules are phased 120° away from one another and their outputs are connected in series     

Nonlinear modeling of integrally actuated beams

A set of nonlinear, intrinsic equations describing the dynamics of beam structures undergoing large deformations is presented. The intrinsic kinematical equations are derived for the general case of a moving beam. Active force/strain terms are added to the equations to take into account active components. The equations are then discretized into finite elements, transformed into state-space form and finally decomposed into modes. Actuation and sensor models are established before implementing a simulation model in Matlab/SIMULINK. The model is validated by comparison with exact, analytical results and then used to analyze the dynamic behavior of an active helicopter blade in vacuum. Beside the analysis of the inherent dynamics of this system in terms of eigenvalues and vectors, the influence of centrifugal stiffening on the modal controllability of the blade is discussed. Finally, the design of a MIMO controller based on full-state optimal control (LQR approach) and optimal state estimation (Kalman filter) is presented with the aim to add vibrational damping to the weakly damped system. The closed loop properties are validated by both analytical methods and simulation runs.     

Influence of periodic wakes on the development of a boundary layer

The flow in turbomachinery is strongly influenced by the rotor-stator interactions. It is known that the unsteadiness of the flow has for effect to advance the laminar-turbulent transition and to alter the heat transfer. The problem of the wake-boundary layer interaction has been studied experimentally by using a simplified geometrical configuration. The stator blade is simulated by a flat plate on which the development of the boundary layer disturbed by periodic wakes is observed. The wakes are generated by moving bars having a circular section, put upstream of the flat plate and running with a constant velocity in the wind of a low-speed tunnel. Numerical studies relating to the phenomenon of interaction are limited. Part of the experimental study has been carried out in a fully turbulent flow in order to avoid the problem of transition. These results are compared with those from a code solving the fully turbulent unsteady boundary layer equations.     

Energy management onboard the Space Station-a rule-based approach

The logic and the schedule for a rule-based optimization technique useful for energy management onboard the Space Station are presented. A diverse array of experiments is scheduled within the constraints of limited solar energy and battery storage availability, taking into account the uneven energy supply between the sunshine and eclipse periods and the occasional need to serve a peak load and the full battery charging load simultaneously. In addition, the noninterruptible and nonrestartable nature of many experiments has to be accounted for in the schedule. These factors have been accounted for by using various time intervals and priority weighting factors. Supply/demand windows of various durations are tested for the typical load profile. This shows under what circumstances fewer scheduling tasks are needed and how a closer match between the supply and demand can be obtained. The optimal supply/demand is expressed in terms of the excess and shortage of electricity, the peak load, and the time displacement of the individual payloads. This technique is implemented using Prolog and Fortran