GPS+BDS组合的实时定轨技术

为了改善卫星几何分布,提高低轨（Low earth orbit, LEO）卫星实时定轨的精度与可靠性,提出了北斗卫星导航系统（Beidou navigation satellite sy stem, BDS）与全球定位导航系统（Global positioning system, GPS）组合模型。组合模型基于加权最小二乘法（Weighted least square, WLS）,利用伪距观测量建立观测模型,实时估计LEO卫星位置。目前,LEO卫星尚未装备星载BDS+GPS双模接收机,为验证算法可行性,利用GPS/BDS卫星星历文件与STK软件仿真生成实验数据。实验结果表明,BDS+GPS组合模型较GPS系统模型精度至少提高26%。     

基于RTS滤波的GPS+BDS非差非组合PPP/INS紧组合模型

GPS高精度定位技术在动态复杂环境中,其定位精度、可靠性和连续性因卫星信号频繁失锁而变差。为此,提出了采用基于RTS滤波(Rauch-Tung-Striebel Filter)的GPS+BDS非差非组合PPP(Precise Point Positioning)与INS(Inertial Navigation System)紧组合模型的策略来克服GPS在动态定位中的弱点。其中,采用GPS+BDS双系统观测数据,可提高PPP解算中的可用卫星数,改善星站间定位几何强度和提高PPP收敛速度;采用PPP/INS紧组合,利用INS的自主定位特性和短期高精度特性,可有效改善复杂环境下的定位精度和连续性;采用RTS滤波,可进一步提高PPP/INS紧组合性能。首先推导了GPS+BDS非差非组合函数模型、PPP/INS紧组合函数模型和RTS滤波函数模型,然后利用一组车载动态数据,对动态GPS PPP、GPS+BDS PPP、GPS/INS紧组合、GPS+BDS PPP/INS紧组合和基于RTS的GPS+BDS PPP/IMU紧组合的定位、测速和定姿性能进行分析。实验结果表明,该方案可有效提高定位(58%～72%)、测速(74%～82%)和定姿(4%～23%)精度,特别是对卫星失锁期间的定位性能改善尤为明显。     

基于BDS/GPS和经验模型的区域电离层建模

基于北斗卫星导航系统（BDS）和全球定位系统（GPS）实测电离层穿刺点（IPP）数据，结合国际参考电离层（IRI）经验模型历史数据，提出一种对区域二维电离层总电子含量（TEC）进行高精度建模的方法.针对缺乏穿刺点的区域内短时间电离层建模时精度较低且各时段穿刺点空间分布不同的问题，该方法使用IRI模型在建模区域内均匀添加虚拟穿刺点数据，并根据与实测穿刺点的距离，使用构造的权重计算公式赋予其动态权重值，通过加权最小二乘法进行球谐模型参数解算.与欧洲定轨中心（CODE）发布的全球电离层图（GIM）进行数据比对发现，相对于只使用BDS/GPS实测穿刺点数据的建模方法，利用本文建模方法计算获得的垂直总电子含量（VTEC）值对缺乏实测穿刺点的区域精度有明显的提升.      

Evaluation on real-time dynamic performance of BDS in PPP,RTK, and INS tightly aided modes

Since China’s BeiDou satellite navigation system (BDS) began to provide regional navigation service for Asia-Pacific region after 2012, more new generation BDS satellites have been launched to further expand BDS’s coverage to be global. In this contribution, precise positioning models based on BDS and the corresponding mathematical algorithms are presented in detail. Then, an evaluation on BDS’s real-time dynamic positioning and navigation performance is presented in Precise Point Positioning (PPP), Real-time Kinematic (RTK), Inertial Navigation System (INS) tightly aided PPP and RTK modes by processing a set of land-borne vehicle experiment data. Results indicate that BDS positioning Root Mean Square (RMS) in north, east, and vertical components are 2.0, 2.7, and 7.6?cm in RTK mode and 7.8, 14.7, and 24.8?cm in PPP mode, which are close to GPS positioning accuracy. Meanwhile, with the help of INS, about 38.8%, 67.5%, and 66.5% improvements can be obtained by using PPP/INS tight-integration mode. Such enhancements in RTK/INS tight-integration mode are 14.1%, 34.0%, and 41.9%. Moreover, the accuracy of velocimetry and attitude determination can be improved to be better than 1?cm/s and 0.1°, respectively. Besides, the continuity and reliability of BDS in both PPP and RTK modes can also be ameliorated significantly by INS during satellite signal missing periods.     

A novel predictive algorithm for double difference observations of obstructed BeiDou geostationary earth orbit (GEO) satellites

Transmission link disturbances and device failure cause global navigation satellite system (GNSS) receivers to miss observations, leading to poor accuracy in real-time kinematic (RTK) positioning. Previously described solutions for this problem are influenced by the length of the prediction period, or are unable to account for changes in receiver state because they use information from previous epochs to make predictions. We propose an algorithm for predicting double difference (DD) observations of obstructed BeiDou navigation system (BDS) GEO satellites. Our approach adopts the first-degree polynomial function for predicting missing observations. We introduce a Douglas-Peucker algorithm to judge the state of the rover receiver to reduce the impact of predictive biases. Static and kinematic experiments were carried out on BDS observations to evaluate the proposed algorithm. The results of our navigation experiment demonstrate that RTK positioning accuracy is improved from meter to decimeter level with fixed ambiguity (horizontal?<?2?cm, vertical?<?18?cm). Horizontal accuracy is improved by over 50%, and the vertical accuracies of the results of the static and kinematic experiments are increased by 47% and 27% respectively, compared with the results produced by the classical approach. Though as the baseline becomes longer, the accuracy is weakened, our predictive algorithm is an improvement over existing approaches to overcome the issue of missing data.     

北斗GEO卫星CEI相时延解算方法研究

连线端站干涉测量(connected element interferometry，CEI)是高精度测角技术，在中高轨卫星、月球及深空航天器定轨定位中有良好的应用前景。基于CEI技术特点，提出了一种新的测量方法，即在相干测距模式下利用测距音和载波信号作为信号源进行连线端站干涉测量。构建了CEI试验系统对北斗GEO卫星进行观测，利用相干测距模式下的下行信号解算群时延、相时延。利用北斗GEO卫星精密星历计算的时延理论值，对北斗GEO卫星CEI群时延和相时延结果进行评估。结果表明，相干测距模式下CEI群时延和相时延残差均值分别为0.47ns、0.08ns，标准差(3σ)分别4.2ns、0.13ns。该项研究验证了相干测距模式下CEI相时延解算的可行性，可为共位地球同步卫星精密相对定位、月球探测器CEI测量提供技术参考。     

Near real-time BDS GEO satellite orbit determination and maneuver analysis with reversed point positioning

The Geostationary Earth Orbit (GEO) satellite is a crucial part of the BeiDou Navigation Satellite System (BDS) constellation. However, due to various perturbation forces acting on the GEO satellite, it drifts gradually over time. Thus, frequent orbit maneuvers are required to maintain the satellite at its designed position. During the orbit maneuver and recovery periods, the orbit quality of the maneuvered satellite computed with broadcast navigation ephemeris will be significantly degraded. Furthermore, the conventional dynamic Precise Orbit Determination (POD) approach may not work well, because of a lack of publicly available satellite information for modeling the thrust forces. In this paper, a near real-time approach free of thrust forces modeling is proposed for BDS GEO satellite orbit determination and maneuver analysis based on the Reversed Point Positioning (RPP). First, the station coordinates and receiver clock offsets are estimated by GPS/BDS combined Single Point Positioning (SPP) with single-frequency phase-smoothed pseudorange observations. Then, with the fixed station coordinates and receiver clock offsets, the RPP method can be conducted to determine the GEO satellite orbits. When no orbit maneuvers occur, the proposed method can obtain orbit accuracies of 0.92, 2.74, and 8.30?m in the radial, along-track, and cross-track directions, respectively. The average orbit-only Signal-In-Space Range Error (SISRE) is 1.23?m, which is slightly poorer than that of the broadcast navigation ephemeris. Using four days of GEO maneuvered datasets, it is further demonstrated that the derived orbits can be employed to characterize the behaviors of GEO satellite maneuvers, such as the time span of the maneuver as well as the satellite thrusting accelerations. These results prove the efficiency of the proposed method for near real-time GEO satellite orbit determination during maneuvers.     

Inertial aided BDS triple-frequency integer ambiguity rounding method

The integer ambiguity resolution (AR) of carrier phase is significant for Global Navigation Satellite System (GNSS) precise positioning. However, in kinematic case, single-epoch AR methods based on alone GNSS are usually not reliable due to the instable pseudorange accuracy. Moreover, the computation of classical AR method Least Squares Ambiguity Decorrelation Adjustment (LAMBDA) is large. Thus, the inertial measurement unit (IMU) is introduced, a new inertial-aided AR method that directly rounds the float ambiguity of BeiDou triple-frequency combined observations, which is characterized by long wavelength, low carrier-phase noise and ionospheric delay, is proposed. The mathematical model of the new method is derived first. Then the impacts of the carrier-phase noise, ionospheric delay and inertial navigation system (INS) position error on the AR success ratio of combined observation are analyzed through probabilistic approach. Based on above investigation, the combinations (0, ?1, 1), (1, 4, ?5) and (4, ?2, ?3) are selected to resolve the original ambiguity. A vehicular integrated navigation test is performed to demonstrate the proposed method. The results show that the average AR success ratios of the three selected combinations, whose float ambiguity errors are 0.041, 0.146, 0.279 cycle respectively, are above 97.25% without regard to low-elevation C05. With respect to positioning accuracy based on our AR method when compared with IE software, the east, north, up error RMS of position are 0.042, 0.024, 0.069 m, respectively. In terms of the AR recover after the BeiDou signals outage, as long as 62 s BeiDou signal complete outage, all the ambiguities of all satellites could be re-fixed immediately. Besides, during the 90 s signals partial outage, the AR is not influenced by the position error, since the float ambiguity errors are all below half-cycle. The research of this contribution demonstrates the effectiveness of the proposed new method, which indicates it is applicable to kinematic positioning, even in BDS degraded and denied environments.     

粒子群优化粒子滤波的接收机自主完好性监测

接收机自主完好性监测（RAIM）是航空卫星导航接收机必不可少的功能,为保持全球卫星导航系统（GNSS）在卫星发生故障时系统性能不降级,需要对卫星故障进行检测和隔离。针对接收机观测噪声非高斯分布的特点,提出一种基于粒子群优化粒子滤波（PSO-PF）的故障检测和隔离算法。通过粒子群优化粒子滤波对状态估计进行一致性检验实现故障检测。采集实测数据验证算法的检测性能,并与基于基本粒子滤波的完好性监测算法进行比较,结果表明:本文所提算法在非高斯测量噪声下可检测并隔离全球定位系统（GPS）故障卫星,其性能优于基于基本粒子滤波的完好性监测算法性能,对研究北斗卫星导航系统（BDS）接收机自主完好性监测具有一定的意义。      

北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。