玻璃基环形振动微陀螺谐振子的设计与制造工艺

针对传统单晶硅材料热胀系数不稳定引起的硅基环形振动微陀螺的温度漂移问题，开展了玻璃基环形振动微陀螺谐振子的设计，并提出了一种新型的玻璃基准三维微结构制造工艺，借助微型电子机械系统（MEMS）工艺中成熟的深硅刻蚀、阳极键合、化学机械抛光等通用加工技术，融合玻璃熔融工艺，解决了玻璃基准三维微结构的制造工艺难题，同时保证了高的加工精度，实现了玻璃基环形振动微陀螺谐振子的高精度批量制造。     

斜爆轰波的波角和法向速度-曲率关系初探

为研究斜劈诱导斜爆轰波的波阵面弯曲效应，以期为斜爆轰的不稳定性及其演化规律提供新的见解，基于加权本质无振荡（WENO）格式空间离散和附加Runge-Kutta方法时间离散的求解器，针对不同的化学反应参数（释热量、放热速率和化学反应区参考长度）条件，开展斜爆轰波的数值计算研究。结果表明斜爆轰波沿波阵面的波角变化可分为3个区域：区域I，波角平滑减小；区域II，波角跃升后衰减；区域III，波角有规律振荡。波阵面法向速度-曲率关系在区域I呈现准垂直直线变化趋势，并伴随着爆轰波强度的不断衰减；在区域III则呈现出"D"形曲线，即由极曲线段、光滑水平变化段和拟线性变化段组成，为类胞格结构的周期性演变；区域II可认为是以上两个区域特征的耦合。不同的化学反应参数对斜爆轰波波阵面的弯曲效应影响存在较大差别。     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

Effect of drag reducing riblet surface on coherent structure in turbulent boundary layer

The characteristics of turbulent boundary layer over streamwise aligned drag reducing riblet surface under zero-pressure gradient are investigated using particle image velocimetry. The formation and distribution of large-scale coherent structures and their effect on momentum partition are analyzed using two-point correlation and probability density function. Compared with smooth surface, the streamwise riblets reduce the friction velocity and Reynolds stress in the turbulent boundary layer, indicating the drag reduction effect. Strong correlation has been found between the occurrence of hairpin vortices and the momentum distribution. The number and streamwise length scale of hairpin vortices decrease over streamwise riblet surface. The correlation between number of uniform momentum zones and Reynolds number remains the same as smooth surface.     

航空铆钉连接件的抗冲击性能

以分离式Hopkinson拉杆装置为基础，设计了特殊的铆接试验件，对MS20615铆钉的铆接结构开展了动态加载下不同加载角度、不同加载速率的力学性能试验。结合其准静态试验结果，获得了铆接结构在纯剪切、30°拉剪耦合、45°拉剪耦合、60°拉剪耦合和纯拉伸试验下的力学性能参数。试验结果表明，加载角度、加载速率对铆接结构的失效载荷与失效模式有显著的影响。在试验结果的基础上，使用有限元软件LS-Dyna建立了铆接结构的简化模型，对比了试验和数值模拟得到的铆接结构载荷-位移曲线，并对简化数值模型进行了网格相关性分析，验证了简化的铆钉单元模型的可行性。     

基于线性频散信号构建的复杂航空结构Lamb波高分辨率损伤成像

在对复杂航空结构的Lamb波损伤成像中,Lamb波频散容易使信号波包发生扩展和变形,从而降低信号的分辨率,并最终影响损伤监测结果,因此Lamb波频散补偿已成为急需解决的一个重要问题。目前常用的频散补偿方法需要理论计算Lamb波频散曲线,难以适用于复杂航空结构。本文利用现场直接测得的相对波数曲线进行线性频散信号构建(Linearly-dispersive signal construction,LDSC)的频散补偿处理,解决了航空复杂结构中Lamb波频散难以补偿的问题。然后,将LDSC用于延迟叠加损伤成像中,以实现高分辨率损伤成像。为了降低多反射的复杂航空结构形式对成像结果的影响,引入了1.5波峰正弦调制的准宽带Lamb波激励波形。最后通过在真实复杂的某型飞机大梁结构上的实验证明了所提方法的有效性。     

基于薄膜热电堆的新型高温瞬态热流密度传感器的研制

目前针对国内薄膜瞬态热流传感器一致性较差、制备工艺不成熟等问题，提出了一种基于光刻工艺和离子束溅射镀膜工艺的制备方法，200对T型金属薄膜热电偶沉积在10mm×10mm的水冷块上，测量1μm的氧化铝热阻层温差，从而得到瞬态热流密度值。对新型高温瞬态热流密度传感器进行比对法标定，一致性误差为0.211%，即工艺的一致性约为99.79%。实验表明，研制的新型高温瞬态热流密度传感器的一致性好,制备工艺具备良好重复性和可移植性，能够满足高温瞬态热流检测需要，为热流传感器的推广应用及标准化、批量化生产提供了良好的技术支撑。     

Effects of Atomic Oxygen Irradiation on Transparent Conductive Oxide Thin Films

作为一种功能薄膜,透明导电氧化物(TCO)薄膜在飞行器的抗原子氧(AO)涂层和太阳能电池领域有着巨大的应用价值。ZnO:Al(ZAO)和In2O3:Sn(ITO)薄膜是目前研究和应用最广泛的TCO。本文对ITO薄膜和ZAO薄膜进行了不同通量的AO辐照。通过对辐照前后样品的X射线衍射、扫描电镜及霍耳效应的表征及测试,研究了AO辐照对这两种TCO薄膜的结构、性能及电学特性的影响。研究表明AO辐照对ZAO薄膜表面有明显的侵蚀作用,但对其结构和导电性能没有明显影响。对于ITO薄膜,随着AO通量的增大,其载流子浓度逐渐下降从而导致了电阻率的提高,电阻率的最大变化达到了21.7%。     

大直径薄壁燃烧室壳体热处理变形研究

对30CrMnSiA钢大直径薄壁燃烧室壳体热处理变形规律进行了研究。结果表明：燃烧室壳体的直径和长度变化主要受热应力和组织应力影响，且组织应力的作用大于热应力，导致热处理后直径缩小，长度在一定范围变化。燃烧室壳体椭圆度及母线直线度主要受吊装方式、壳体焊接质量、油冷时壳体入油速度等工艺方法影响，采取专用工装，可以校正燃烧室壳体椭圆度及母线直线度。     

Progress in the Study of Galaxies: Structures,Collective Phenomena and Methods

The review contains the important achievements in dynamics of the galactic disks. Among them there are I. New structures discovered recently: • giant vortices (including giant anticyclone in the Solar vicinity); • slow bar; • inner oscillating structure within spiral arms similar that of enveloped soliton; • chaotic streamlines in the velocity field of the gaseous disk of a real galaxy. II. New collective phenomina discovered recently: • new overreflection instability initiating ‘mini-spiral’ in the innermost central parsec of Galaxy; • large-scale convection caused by nonlinear interaction of density wave with disk gas; • non-kolmogorovian spectrum of weak turbulence corresponding to the observed one in the • Solar vicinity. III. New methods worked out recently: • reconstruction of full three-dimensional vector field of gas velocity from the observed line-of- • sight velocity field; • observational test for verification of the wave-nature of the spiral arms; • observational test to distinguish two types of vertical motions: warp and z-motions in the • density wave; • derivation of correct system of two-dimensional dynamical equations from the initial three- • dimensional one. This revised version was published online in June 2006 with corrections to the Cover Date.