硅烷偶联剂改性Al2 O3p/TDE-85 的力学性能

利用硅烷偶联剂对Al2O3颗粒进行表面改性,制备了Al2O3颗粒增强的TDE-85树脂基复合材料,研究了表面改性对其力学性能的影响,采用差热分析仪测定复合材料的固化反应温度,并计算了固化反应活化能。利用扫描电子显微镜分析了拉伸断口形貌。研究发现,当Al2O3用量为2wt%时,固化反应速度较快,硅烷偶联剂用量为4wt%时,冲击强度为13.2 kJ/m2;拉伸强度为65.2 MPa;弹性模量为2.66 GPa;最大伸长率为3.35%,此时对Al2O3颗粒的表面改性综合效果最好。     

C/C-Cu复合材料的烧蚀形貌和烧蚀机理

以PAN预氧化纤维整体毡为增强体,经碳化、等温CVI致密化后制备多孔的C/C复合材料预制体,利用气体压力浸渗法将Cu引入C/C预制体中制备C/C-Cu复合材料。采用氢氧(H2-O2)焰考核C/C-Cu复合材料的烧蚀性能,经扫描电镜和电子能谱对不同烧蚀区域的微观结构和成分进行分析,结果表明:预制体密度为0.96 g/cm3的C/C-Cu复合材料的线烧蚀率和质量烧蚀率分别为4.75μm/s、0.223 mg/s,烧蚀性能优良;其烧蚀表面具有不同的宏观形貌,在烧蚀中心区产生了明显的凹坑,主要烧蚀机制为C/C预制体的氧化和铜基体的机械冲刷;烧蚀过渡区聚集了大量的铜基体,其烧蚀机制为Cu的热氧化和机械冲刷;烧蚀边缘区材料表面变黑,主要因为C/C的氧化。为了提高C/C-Cu的烧蚀性能,需要发挥C/C预制体的"钉扎"作用,阻止Cu在高温下被气流冲刷而发生流动。     

C/C-ZrC复合材料的制备及结构性能研究

采用针刺及细编穿刺结构分别引入热解碳和沥青碳的多孔C/C坯体,通过反应熔渗工艺（RMI）与熔融金属Zr反应制备了C/C-ZrC复合材料。研究了预制体结构和基体碳类型对C/C-ZrC复合材料微观结构及力学性能的影响。结果表明：材料熔渗后只由C,ZrC两相组成,孔隙率5%~10%,ZrC质量分数53%~63%。针刺结构的C/C坯体熔渗效果更好,制得的C/C-ZrC复合材料密度最高达到3.21 g/cm³;ZrC质量分数达到62.8%。热解碳基体在熔渗过程中对纤维保护作用更好,C/C-ZrC复合材料的弯曲强度达到148 MPa,压缩强度达到408 MPa。     

作动器输出机构刚度优化设计与仿真分析

作动器输出机构的变形可以看作是输出轴体扭转变形与摇臂变截面悬臂梁变形的综合。从材料力学的角度出发,详细推导了作动器输出机构机械刚度的理论计算方法,并以此理论为依据对作动器输出机构的结构进行优化设计。通过仿真对比确定优化设计的正确性,为工程应用提供了有力的理论支撑。     

一种新型多普勒噪声抑制技术对BepiColombo任务无线电科学实验的性能提升

在欧洲空间局和日本宇宙开发机构联合开展的BepiColombo水星任务中,将开展水星轨道器无线电科学实验,包括估计水星的引力场及其旋转状态,并对广义相对论进行验证。目前地面系统和星上设备的主流配置可以在无线电科学实验中建立X/X、X/Ka和Ka/Ka多个频段的链路,测速精度可达3 um/s（1 000 s积分）,测距精度为20 cm。提出了基于时延机械噪声对消技术提高无线电科学实验性能的方案。时延机械噪声对消技术需要处理在两个测站不同时刻的测量数据,一个测站实施双向多普勒测距,对另一个单收测站的要求较为严格,该测站需要具有较好的对流层条件。这种方法能够显著降低Ka频段双向链路的主要测量噪声,包括由对流层和天线机械系统震动引起的噪声。我们给出了端到端的仿真性能,并估计了在使用时延机械噪声对消技术前提下的水星引力场和旋转状态。考虑使用NASA位于美国本土戈尔德斯敦的DSS-25天线或欧空局位于阿根廷马拉圭的DSA-3天线作为双程测量站,并考虑使用位于智力的APEX天文观测天线作为单收站。分析结果表明在最好的噪声条件下,使用DSA-3天线作为双程测量站时,时延机械噪声对消技术可将待估计的全局和局部参数的估计精度提升一倍。对于无线电科学实验的目标,这一可能的性能提升对行星地质物理学很有意义,它将有益于研究水星内部的结构。     

Precipitation behavior and properties of extruded 7136 aluminum alloy under different aging treatments

In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment (T6), retrogression and re-aging treatment (RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time (within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength (716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity (33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3% and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3RRA60 treatment, a good combination of tensile strength (705 MPa) and electrical conductivity (33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.     

超塑变形对TC4 室温力学性能的影响

在T=880℃和ε=9.8 ×10-4 s-1下,进行了TC4圆筒件超塑成形试验,研究了超塑变形量对TC4室温强度、疲劳性能和金相组织的影响.结果表明:随着变形量的增加,晶粒尺寸增大.当超塑胀形延伸率e为55％时,晶粒尺寸由供应态的约8μm增加为约20 μm.随着e增加,TC4室温下的屈服强度、抗拉强度和条件疲劳强度降低.当e为55％时,材料的屈服强度、抗拉强度下降约7％;循环周期为106下的疲劳强度下降约10％.     

氟聚物基含能反应材料研究进展

对氟聚物基含能反应材料进行了概述,介绍了反应材料的组分、结构特点以及制备关键技术,并对反应材料各项性能指标进行了综述,对氟聚物基反应材料的应用现状和前景进行了归纳和展望.     

A novel virtual material layer model for predicting natural frequencies of composite bolted joints

A novel virtual material layer model based on the fractal theory was proposed to predict the natural frequencies of carbon fiber reinforced plastic composite bolted joints. Rough contact surfaces of composite bolted joints are modeled with this new proposed approach. Numerical and experimental modal analyses were conducted to validate the effectiveness of the proposed model. A good consistence is noted between the numerical and experimental results. To demonstrate the necessity of accurately modeling the rough contact surfaces in the prediction of natural frequencies, virtual material layer model was compared with the widely used traditional model based on the Master-Slave contact algorithm and experiments, respectively. Results show that the proposed model has a better agreement with experiments than the widely used traditional model (the prediction accuracy is raised by 8.77% when the pre-tightening torque is 0.5 N∙m). Real contact area ratio A* of three different virtual material layers were calculated. Value of A* were discussed with dimensionless load P*, fractal dimension D and fractal roughness G. This work provides a new efficient way for accurately modeling the rough contact surfaces and predicting the natural frequencies of composite bolted joints, which can be used to help engineers in the dynamic design of composite materials.     

分步固化工艺对中温材料体系天线罩性能的影响

为探讨分步固化工艺对某中温材料体系天线罩性能的影响,本文对SW-280A/环氧树脂预浸料、FM73M胶膜和Nomex纸蜂窝组成的中温材料体系层压板及蜂窝夹层结构试样多次固化后的力学性能及电性能进行了研究。结果表明:经一次、二次、三次、四次及五次固化后,力学性能及电性能变化幅度不大,无明显的下降趋势,说明多次固化未对该中温材料体系的力学性能及电性能造成影响。材料体系天线罩的制造可以采用分步固化工艺,分步固化工艺对其力学和电性能不会产生影响。