固体火箭发动机试验模态分析技术研究

将固体火箭发动机划分为144个自由度，采用锤击法，单点激励多点响应（SIMO）对其在4种工况下进行了频率响应的测量，应用了多种方法进行模态参数识别和数据拟合，并对其结果进行比较，获得了发动机在各工况1kHz以内的各阶固有频率、振型和阻尼，并对试验模态分析技术在固体火箭发动机试验中的应用进行了研究。     

固体火箭发动机模态分析的缩聚方法

对于一些复杂结构的模态分析，要得到能够指导工程设计的结果，几何模型和力学模型划分单元必须足够多，这必然耗费大量的空间和时间资源，并导致计算困难。文中以某上面级固体火箭发动机模态分析为例，利用有限元法、固定界面法和Guyan缩聚法进行自由度缩聚后再进行模态分析，分析结果令人满意。     

RGPS在交会对接中的应用

在伪距差分算法中， 目标飞行器的绝对导航误差通过方向余弦影响相对导航精度， 同时由于线性化观测方程引起的模型误差减小， 使其精度随相对距离减小而提高。仿真结果表明位置差分可以用于相对距离大于２００ｍ 阶段， 伪距差分可以用于相对距离２００ｍ 以内阶段， 两种方法的相对速度精度都需要提高。     

多协议多用户GPS/GSM监控系统网关的设计与实现

在多协议、多用户GPS(Global Position System)/GSM(Global System for Mobile communications)监控系统中,网关的设计对系统的性能、可用性和可扩展性有重要作用.讨论了在网关设计中需要注意的几个关键问题:通过分析不同短消息服务器的接口协议,提出使用协议管理器实现多协议接入;给出了与用户系统的通信指令格式,并分析了地址的转换流程.最后剖析了用多线程方式和消息驱动实现这种系统的优点,并给出了一个具体实现的消息循环流程.实践证明这种设计是可靠高效的.     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

一种分析轮式起落架直升机“舰面共振”的方法

 针对轮式起落架直升机，提供了一种“舰面共振”动力稳定性分析方法。首先，针对直升机在舰面上随舰船一起摇晃时左右起落架受载不对称的状况，近似采用受对称载荷产生对称变形、受非对称载荷产生非对称变形的方法计算了直升机的平衡状态；其次，根据轮式起落架轮胎和缓冲支柱刚度和阻尼共同作用的特点，结合轮式起落架的几何关系，采用复刚度的方法得出起落架作用于机体的刚度与阻尼；最后，用桨叶振动模态法对轮式起落架的直升机进行了不同旋翼升力卸载以及鱼叉系留与否的“舰面共振”动力稳定性计算分析，并通过算例得到验证。     

Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

模态参数识别在飞行颤振试验中的应用

 本文介绍了飞机飞行颤振试验的简况、颤振试飞数据处理的特点和一些特殊要求。简要介绍了用频域参数识别方法和时域参数识别方法识别模态频率和阻尼的基本原理和基本数学模型。文中着重介绍了为解决颤振试飞中所获得的信号的信噪比差,而又要求识别的模态阻尼值的精度比较高这个矛盾和为了尽量缩短数据分析所花费的计算时间而采取的若干措施。