卫星导航有源接收天线噪声温度测量

卫星导航有源接收天线的噪声温度是导航接收系统的关键技术指标之一。针对卫星导航有源天线总体噪声温度无法测量的问题，研制了两台口面型噪声源，口面噪声源主要由辐射体、辐射体物理温度控制和温度测量仪等组成。两个口面噪声源在L和S波段分别提供高低温标准噪声温度，采用Y系数测量方法测量有源接收天线的总体天线噪声温度。测量了某卫星导航有源天线的总噪声温度，在(1.19～1.29) GHz的频率范围内，中心频率1.24 GHz上噪声温度测量结果为206 K，但是在1.266 GHz频率点上噪声温度测量大于4 000 K，说明天线与滤波器之间、滤波器与放大器之间存在设计问题或其它问题，体现出测量有源天线噪声温度的必要性。     

城市环境下北斗B-CNAV1电文RS-LDPC 级联编码方法

针对城市环境下卫星导航系统用户接收终端对电文编译码算法的低复杂度和抗衰落性能需求，以北斗导航系统B-CNAV1电文为改进对象提出了一种外码采用RS码、内码采用二进制LDPC码的电文级联编码方法。通过RS码提高电文对抗突发错误的能力，同时利用二进制LDPC码保证电文对抗随机错误的能力。采用LMS信道对城市接收环境建模，仿真结果验证了本文提出的RS-LDPC级联码与B-CNAV1电文64进制LDPC码具有相近的性能，同时大幅降低了算法复杂度，较好地实现了电文纠错性能和实现复杂度的平衡，提供了一种适用于城市环境的高性能、低复杂度电文编码方法。     

Comprehensive performance review of BDS-3 after one-year official operation

On July 31, 2020, the third generation BeiDou Global Satellite Navigation System (BDS-3) was officially put into service. Here we first reviewed the development history of BDS-3, and described the status of BDS-3 constellation, satellite signals, and ground tracking network. Then we expounded the 10 innovations in which BDS-3 differs from the other global satellite navigation systems. In addition, the latest service performance status of BDS-3 was displayed from a comprehensive perspective. The performance of BDS-3 was analyzed and evaluated from five aspects: constellation performance, observation data quality, spatial signal performance, PNT (Positioning, Navigation, and Timing) service performance, and precision positioning application. We used 14 indices to conduct comprehensive assessment of the BDS-3 service performance. Finally, the main direction of the next development of BDS was prospected.     

Analysis on navigation accuracy of high orbit spacecraft based on BDS GEO and IGSO satellites

To make up for the insufficiency of earth-based TT&C systems, the use of GNSS technology for high-orbit spacecraft navigation and orbit determination has become a new technology. It is of great value to applying Geosynchronous Earth Orbit (GEO) and Inclined GeoStationary Orbit (IGSO) navigation satellites for supporting the navigation of high-orbit spacecraft since there are three different types of navigation satellites in BeiDou Navigation Satellite System (BDS): Medium Earth Orbit (MEO), GEO and IGSO. This paper conducts simulation experiments based on Two-Line Orbital Element (TLE) data to analyze and demonstrate the role of these satellites in the navigation of high-orbit spacecraft. Firstly, the spacecraft in GEO was used as the target satellite to conduct navigation experiments. Experiments show that for the spacecraft on the GEO orbit, after adding GEO and IGSO respectively on the basis of receiving MEO navigation satellite signals, the accuracies were improved by 7.22 % and 6.06 % respectively. When adding both GEO and IGSO navigation satellites at the same time, the accuracy can reach 16 m. In the second place, navigation and positioning experiments were carried out on three high elliptical orbit (HEO) satellites with different semimajor axis (32037.2 km, 42385.9 km, 67509.6 km). The experiments show that the number of visible satellites has been improved significantly after adding GEO and IGSO navigation satellites at the same time. The visible satellites in these three orbits were improved by 32.84 %, 41.12 % and 37.68 %, respectively compared with only observing MEO satellites.The RMS values of the navigation positioning errors of these three orbits are 25.59 m, 87.58 m and 712.48 m, respectively.     

Cooperative fault detection and recovery in the GNSS positioning of mobile agent swarms based on relative distance measurements

Relative measurements are exploited to cooperatively detect and recover faults in the positioning of Mobile Agent(MA) Swarms(MASs). First, a network vertex fault detection method based on edge testing is proposed. For each edge, a property that has a functional relationship with the properties of its two vertices is measured and tested. Based on the edge testing results of the network, the maximum likelihood principle is used to identify the vertex fault sources. Second, an edge distance testing...     

光学捷联基准导航计算机设计与实现

为满足当前光学捷联基准解算精度高、低功耗、小型化的需求，设计了一种基于现场可编程门阵列（FPGA）和数字信号处理器（DSP）为核心的嵌入式导航计算机。对导航计算机（ENC）硬件设计进行了阐述，并重点研究了导航计算机信息处理模块（MPM）和数据采集通信模块（DCM）的协同使用，充分体现了DSP和FPGA联合使用的优点。其次，研究了基于主惯导航向和计程仪速度组合的Kalman滤波器设计，以解决长时间工作对系统精度的影响。最后，将该导航计算机实际应用于捷联基准中，通过半实物仿真试验，验证了导航计算机硬件方案的可行性和Kalman滤波器设计的合理性。结果表明，基于FPGA和DSP双核的嵌入式导航计算机性能稳定，设计合理，满足光学捷联基准高精度、低功耗的使用要求。     

基于萤火一号技术的自主火星探测器方案

提出了基于萤火一号（YH-1）火星探测器技术的自主火星探测器方案,可携带多种有效载荷在准太阳同步圆轨道上对火星进行科学探测。该方案具有可实现性强、成本低、研制周期短等特点,并能满足火星探测后续工程中的环绕器设计要求,利于我国火星探测的长远发展。利用长征三号乙运载火箭,在西昌卫星发射中心就可实现2013/2016年的我国自主火星探测。     

基于卫星轨道软件平台的自主导航计算方法

为增强卫星的自主生存能力，研究了基于卫星轨道软件平台的自主导航计算方法。由星载导航部件获取导航参数，应用数值或解析法进行自主导航计算，以实时获得精确的轨道参数。理论分析和仿真结果表明，读方法正确可行，具有较高的工程应用价值。     

空天飞行器星敏感器安装误差在线标定方法

空天飞行器高动态、长航时的运动特性可能导致一体化安装的惯性/天文组合导航系统中星敏感器与惯导间产生安装误差角。设计了一种星敏感器安装误差角动态辨识方法,建立了星敏感器安装误差角模型,设计了基于天文角度观测的星敏感器安装误差角动态辨识方案,分析了不同机动飞行方式下星敏感器安装误差角的可观测度。仿真结果表明,所设计的基于卡尔曼滤波的动态辨识方法能够在飞行器机动过程中快速地对星敏感器安装误差角进行在线标定,对安装误差角的标定值可以达到实际误差值的85%以上,有效地提高了组合导航系统的精度。     

卫星授时与时间传递技术进展

近年来,卫星导航技术发展迅速.卫星导航系统以精密时间测量技术为基础,实现了伪距测量,进而实现定位.同时,卫星导航系统还提供了高精度授时功能.综述了卫星导航系统的授时和时间频率传递技术、基于通信卫星的授时技术以及双向卫星时间频率传递(TWSTFT)技术等.随着我国北斗卫星导航系统(BDS)的建成和提供服务,BDS授时应用研究正在快速发展.基于BDS/GNSS多系统的精密单点定位(PPP)时间传递技术已成为重点研究方向,未来将会应用于国际时间比对.同时,随着卫星通信技术尤其是低轨通信卫星技术的快速发展,低轨通信卫星授时会成为一个有潜力的研究方向.