Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

“任务驱动”下的计算机专业课程教学实践与探索

本文总结了“任务驱动”在教学中的应用，提出了“任务”设计要全方位立体化进行考虑；评价要全方位多样化。指出了“任务驱动”必须与多种教学法优化组合，才能发挥其最大教学效率。     

现代远程教育的媒体素材构建方法

本文阐述了媒体素材的采集及处理方法 ,对现代远程教育工程建设可提供有效的帮助     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

变循环发动机组合变几何调节方案

基于面向对象的设计思想,设计出了一个双涵道变循环发动机(VCE)的性能计算模型,并选取了双涵道VCE具有代表性的典型工作点,进行了双涵道VCE的组合变几何调节的相关研究.结果表明:在双涵道VCE的亚声速巡航和超声速巡航工作点,合理调节风扇导流叶片角度可以更大程度发挥双涵道VCE性能优势;在亚声速巡航工作点时选取的方案4和超声速巡航工作点时选取的方案4均比双涵道VCE设计点的变几何调节方案性能更优.     

一种直升机自旋训练过程涡轴发动机控制规律设计与仿真

针对直升机自旋训练过程中涡轴发动机快速响应要求,提出了一种以燃油流量和导叶角为控制量的鲁棒控制规律抑制自由涡轮转速瞬态下垂.首先,通过改进UH-60直升机/T700发动机综合模型,使之能够模拟自旋进入及自旋恢复过程动态变化.其次,提出并设计一种基于燃油流量和导叶调节的涡轴发动机鲁棒控制规律,并通过典型的自旋训练过程仿真,验证了该控制规律相比仅以燃油流量为变量的控制规律,自由涡轮转速瞬态下垂量降低至3%以下,且燃油流量变化更加平缓,改善了执行机构的工作条件.     

基于气化煤油喷注的RBCC燃烧室亚燃模态燃烧组织研究

针对RBCC发动机亚燃模态进行主动冷却的情况下,煤油发生气化后喷入燃烧室的燃烧组织开展研究。在亚燃模态低来流总温条件下,使用小流量富燃一次火箭高温射流作为引导火焰可以实现支板喷注二次燃料的可靠点火和稳定燃烧,当煤油喷注前加热到气化/超临界态时,燃烧室最高压力相比于室温液态煤油提高约10%左右。当关闭一次火箭后,利用凹腔成功实现火焰稳定,而使用室温液态煤油喷注时,凹腔内无法实现火焰稳定。通过数值模拟获得了不同喷注方案的燃烧室燃烧流场特征和燃烧组织过程,为进一步优化燃烧室的性能提供依据。结果分析表明通过合理布置燃料支板喷注位置,由燃料支板下游集中的燃料热释放使得气流在扩张燃烧室构型中实现"热力壅塞",通过燃料分配实现燃烧室内合理的燃烧释热分布,使RBCC发动机亚燃模态完成高效燃烧组织。     

复合材料开口结构参数化建模技术研究

基于MSC.Patran软件,运用PCL语言编写了参数化建模程序,实现了多种开口形式和加强形式的复合材料开口结构二维模型快速化、自动化建立。运用刚度等效原理将复合材料任意截面形式的筋条等效成各向同性矩形实心筋条,解决了目前有限元软件中没有提供复合材料一维梁单元的问题。结合复合材料开口结构刚度计算与优化设计实例,验证了建模方法的准确性与实用性。     

主/从动式组合旋翼悬停状态气动特性分析

针对传统直升机构型中主旋翼旋转时产生的扭矩需要尾翼或是反向旋转的共轴旋翼加以抵消,从而造成能量浪费的问题,以将主旋翼旋转时产生的扭矩转化为升力为出发点,提出了一种主旋翼带动下方无动力旋翼旋转的主/从动式组合旋翼气动布局构型。通过动量叶素理论以及CFD数值模拟中的多重参考系法,对主/从动式组合旋翼悬停状态的气动特性进行了初步分析,结果表明,此构型中的下方从动旋翼利用上方主动旋翼的扭矩产生了额外10%的升力,同时下方从动旋翼在上方主动旋翼引流的有利干扰下升力系数提高了35%。     

浅析运输类飞机经济舱头排旅客座椅头部损伤判据的影响因素

介绍了头部损伤判据HIC的概念、适航要求及影响运输类飞机客舱头排旅客座椅HIC的相关参数;叙述了旅客座椅头排距、头部撞击壁板的刚度、安全带织带伸长率、乘坐摩擦系数等参数的影响和重要程度;对如何设计符合HIC要求的经济舱头排旅客座椅和壁板提出了建议。