锯齿扁管内沸腾换热试验

建立以等热流密度方式进行试验件加热的沸腾换热试验系统,分别对当量直径为1.28mm和1.59mm锯齿扁管内R134a工质的沸腾换热特性进行研究,试验参数范围:制冷剂质量流率为68.5~305.5kg/(m2·s),工作饱和压力为0.27~0.46 MPa,加热热流密度为9~42kW/m2。试验结果表明:相同结构的通道,当量直径小换热能力更强;热流密度和饱和压力对沸腾换热的影响与一个干度值有关。当干度小于此值时,沸腾换热系数会随着热流密度及饱和压力增大而增大;而当干度大于此值时,沸腾换热系数随着干度增大而急剧下降,热流密度和饱和压力对换热的影响较小;该干度值会随着热流密度或饱和压力增大而逐渐变小。质量流率对沸腾换热的影响与热流密度有关,随着热流密度增大,质量流率的影响趋向大干度区域。通过分析各参数对沸腾换热的影响,建立了一个预测试验工况下微小尺寸锯齿扁管的沸腾换热系数计算经验公式。     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

均匀流吹吸式通风实验研究

介绍了吹吸式通风气流的特点,并对吹吸风口间距3.5～3.8m时的低速流场的吹吸式通风气流流场的规律特性进行了实验研究。结果表明,当吹吸风口间距小于3.8m时,低速流场吹吸式通风的气流在射流起始段未结束时就进入了汇流段(吹吸气流流场中未出现射流主体段)。高速流场吹吸式通风的轴心速度经验公式与低速流场的吹吸式通风实验结果式对比分析,发现两者之间存在较大的偏差。高速流场吹吸式通风的轴心速度经验公式不适用于描述低速流场吹吸式通风轴心速度的规律特性。     

弹射座椅新型变推力火箭发动机装配工艺技术

对飞机座椅某新型变推力火箭发动机部装、总装及检测、试验等技术难点进行了工艺性分析;介绍了发动机装配全过程的工艺流程、检测、试验方法及注意事项等,在工艺设计及应用过程中取得了一定的技术积累,对于新型变推力火箭发动机的装配质量及效率具有较强的指导意义.     

具有多个执行机构Lurie系统的时滞相关稳定性

Ｌｕｒｉｅ时滞控制系统是工程实践中经常遇到的一类重要的非线性控制系统，本文根据微分方程理论，提出了不确定性具有多个执行机构的Ｌｕｒｉｅ时滞控制系统时滞相关稳定的充分性判据，并给出系统衰减速度的估计方法。该方法仅需假定时滞有界，因而其结论适扩用于变时滞的系统。文末给出应用本文结果的两个应用实例，并与相关成果进行了比较，计算结果表明了本文方法的有效性。     

国有企业资产重组中职工带资分流的法律研究

如何做好主辅分离，既加强主业企业的竞争优势，又妥善安置好分流职工，是国有企业资产重组中的一个重要课题。采取职工带资分流的方式，是解决这一难题的一个有效途径。鉴于我国目前在此方面的相关立法并不健全，我国应进一步完善相关立法。     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

“任务驱动”下的计算机专业课程教学实践与探索

本文总结了“任务驱动”在教学中的应用，提出了“任务”设计要全方位立体化进行考虑；评价要全方位多样化。指出了“任务驱动”必须与多种教学法优化组合，才能发挥其最大教学效率。     

现代远程教育的媒体素材构建方法

本文阐述了媒体素材的采集及处理方法 ,对现代远程教育工程建设可提供有效的帮助     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.