光电感烟与电子差定温组合探测器的研究

论述了光电感烟与电子式差定温组合探测器的工作原理，设计方法及应用前景，该组合探测器具有对烟、温度的探测功能，并能通过地址编码底座的向控制器发送预报警和报警两种相关的频率信号，极大地提高了火灾自动报警系统早期预报的可靠性，降低了误报率及成本是一种具有良好发展前景的新型火灾探测器。     

一种温度动态调节方法及其动态性能仿真研究

航空气源模拟试验台主要用于模拟不同飞行状态时发动机给空气管理系统的供气,由于飞机爬升、降落时发动机供气参数会急剧变化,因此航空气源模拟试验台需具备动态能力.基于一种温度动态调节方法,在合理简化的基础之上采用NHT方法对其温度动态性能进行了仿真研究,仿真结果表明该温度动态调节方法能够满足温度动态性能需求,对动态航空气源模拟试验台的设计选型有较高的参考价值.     

G-16EP通用航空电瓶充放电及寿命研究

为了对G-16EP型电瓶进行维护和保养，根据电瓶厂家规定和适航规范，总结了该型电瓶的充电和容量测试（放电）方法，指出了影响电瓶寿命的主要因素，为该型号电瓶的维护提供了参考。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

高温合金叶片的激光熔覆修复技术研究

航空发动机高温合叶片故障件很难修复,采用先进的激光熔覆技术对高温合金叶片进行深度修理具有重要意义。通过采用合适的激光设备、熔覆粉末,并选取合理的熔覆参数以及热处理工艺等,使熔覆粉末在叶片基体上形成有效的熔覆体,该熔覆体的强度和硬度达到叶片材料性能要求,同时也能保证熔覆体与基体的结合强度,完成高温合金叶片的修复。     

高速铣削铝合金7055铣削力和铣削温度的仿真研究

采用有限元分析软件AdvantEdge模拟了航空铝合金7055高速铣削过程,获得了单个刀齿高速加工中铣削力变化曲线,预测了不同切削时间下工件及刀具上的温度分布,获得了刀具前刀面和后刀面的温度分布曲线;建立了高速铣削参数对铝合金7055铣削力和铣削温度的影响曲线,可辅助优化切削加工参数,有助于减小切削过程中刀具的磨损,改善刀具切削状态,提高刀具使用寿命.     

飞机高温高压空气导管的振动特性研究

在分析某大型客机环境控制系统的配平子系统的基础上,基于有限元软件Patran和Nastran建立了配平系统的空气导管有限元分析模型,选用Lanczos算法,对管系进行动力学模态分析,获得了系统前五阶的频率和振型.同时,考察了气体热力学参数和球形接头作动力学参数对空气导管动力学模态特性的影响.结果表明:从频率上看,配平系统Part1在45Hz以下谐振模态分布密集.从振型上看,球形接头和滑动接头处的振型变化幅度较大;从动力学特性的影响因素来看,配平系统空气导管管系的固有频率随管内温度的增加而递减,随管内压力的增加而增加;球形接头起动力矩和刚度增大会增加各阶的固有频率.研究工作对于我国大型客机空气导管系统的可靠性设计具有参考价值.     

钛合金螺旋铣孔的切削力和切削温度试验研究

螺旋铣孔技术是航空装备制造领域新出现的制孔技术,因具有加工质量好、效率高等优点被用于加工钛合金、复合材料等难加工材料.采用包括切削速度、切向每齿进给量、轴向每齿进给量和螺旋导程4个基本加工参数描述螺旋铣孔过程,分析了基本参数和螺旋铣孔输入加工参数(自转、公转、进给)之间的关系.在自行研制的螺旋铣孔试验平台上开展了钛合金材料的加工试验,研究了钛合金螺旋铣孔加工中切削温度及切削力的特征,以及基本加工参数对切削温度和切削力的影响规律.试验结果表明,在螺旋导程一定时,切削温度主要由切削速度决定,而与轴向每齿进给量及切向每齿进给量无明显关系;而切削力的影响规律与切削温度相反.切削温度是影响螺旋铣孔过程中刀具磨损及加工孔质量的主要因素.在需同时保证加工效率及加工质量的前提下,应尽量选择大的切向每齿进给量、大的轴向每齿进给量和较低的切削速度.     

先进材料与工艺在机载导弹上的研究与应用

先进材料和工艺在机载导弹中的应用是实现机载导弹优异性能的基础和前提.主要讨论了用于机载导弹的复合材料、高温钛合金、铝锂合金、金属间化合物等先进材料和近无余量成形、超精密加工等先进工艺的特点以及国内外的发展概况.