流-固-推进耦合下的机体/推进一体化性能分析

吸气式空天飞行器的一体化性能随扰动变化的敏感性高,在高马赫数飞行条件下,有必要开展流-固-推进耦合性能分析。针对机体/推进一体化布局的吸气式飞行器,明确一体化部件之间的耦合关系和耦合问题,利用CFD、有限元和准一维流方法,结合本征正交分解(Proper Orthogonal Decomposition,POD)降阶手段,建立吸气式空天飞行器流-固-推进多物理场耦合快速分析方法,并开展多场耦合特性分析。结果表明:(1)进气道压缩面的流-固耦合导致出口静压的最大振荡振幅约为平均静压的21.6%,而出口马赫数的最大振幅约为平均马赫数的8.45%。(2)进气道出口性能的振荡会影响发动机的推力性能,导致推力振荡幅值可达平均值的31%,且随着时间的推移,会在进气道外压缩流场产生大量的气动涡,涡结构进入进气道后会导致进气道出口性能的持续下降,进一步削弱了发动机的平均推力性能。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

POD和DMD方法分析不同间隙压气机旋转不稳定性特性

对一台单级低速轴流压气机旋转不稳定性(RI)进行分析。在前期的旋转不稳定性特性、流场成因和不同间隙影响的研究基础上,进一步基于全通道数值模拟,采用两种流场降阶方法分析不同叶顶间隙条件下旋转不稳定性各阶模态对应的流场成分、模态能量占比和稳定性等特性。计算结果表明,前几阶模态能量占比大,对流场起主要贡献,并且稳定性相对较强。随着间隙的减小,旋转不稳定性的能量占比和稳定性下降,各阶的叶片转动成为流场的主要成分。      

高转速风扇叶片外物撞击损伤的定量评价方法

外物撞击是造成航空发动机风扇叶片变形、损伤甚至断裂的主要因素。针对外物撞击持续时间短、瞬间载荷大、损伤影 响因素多，难以进行定量损伤评价的问题，提出基于叶片损伤参数α的叶片损伤定量评价方法。以发动机风扇叶片受冰撞为例， 采用非接触叶尖计时测量方法，对叶片撞击产生的叶尖位移进行监测分析，验证了该方法的可行性。采用瞬态动力学分析方法对 叶片经受撞击过程进行全流程仿真模拟，并采用正交试验法定量研究了外物撞击过程中的撞击速度、叶片转速、撞击位置3种因 素对叶片损伤参数α的影响，拟合回归方程并绘制了这3种因素的3D响应曲面图，得到各因素的影响权重。结果表明：冰块速度 与撞击位置同时下降时，叶片损伤弱化效果显著。该方法可为大型风扇叶片抗外物打击性能设计和在役健康监测提供理论支撑。     

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

桥函数理论的研究进展

叙述了从研究沃尔什函数的复制理论和方块脉冲函数移位方法出发，推出桥函数的构造过程，桥函数把工程中常用的沃尔什函数和方块脉冲函数这两种似乎不相关的函数联系了起来，本文详细地给出了四种桥函数的构造过程和它们的波形。     

一种颤振分析新方法

本文提出一种颤振分析新方法－正交搜索法，其本思想是依据解析函数的保角映，沿复变量实部和虚部交替搜索，逐步达到所求方程的根。完全非定常气动力由格林九方法直接计算，颤振分析结果准确。该算法可在计算机上执行，有一定推广价值。     

藜蒿中绿原酸溶剂提取方法研究

应用醇溶剂回流法提取藜蒿中绿原酸，通过正交试验，对藜蒿中绿原酸进行溶剂提取条件的优化研究，并分剐讨论了各因素对绿原酸提取率的影响。实验表明，乙醇浓度70％、12倍的提取剂用量、温度85℃、提取时间4h、提取两次为乙醇溶剂提取藜蒿中绿原酸的最佳条件，总绿原酸提取率为1.24％。     

先复制后移位桥函数的性质

进一步研究了先复制后移位桥函数的性质,例如递推关系式、数学表达式、乘积特性及正交条件。同时,还给出了几组完备的正交函数系。