径向非均匀进气喷湿对跨声速压气机气动性能影响研究

针对湿压缩技术的应用，为了深入认识径向非均匀进气喷湿对压气机气动性能的影响，以某跨声速压气机级为研究对象，采用CFD技术结合欧拉-拉格朗日法对径向非均匀进气喷湿条件下压气机气液两相流场进行数值模拟，对比研究了叶顶、叶中和叶根局部喷湿三种不同径向位置喷湿条件对压气机气动性能及失稳边界的影响规律，并通过喷湿前后流动径向匹配规律及流动结构的变化解释了影响机理。结果表明：叶顶喷湿相比叶中和叶跟喷湿是更好的喷湿方案，叶顶喷湿时压气机压比和效率升高程度更大，且稳定裕度降低程度更低；当液滴粒径小于50μm，喷射速度大于20m/s时，离心力对液滴径向迁移的影响可以忽略不计，液滴在经过压气机级流道过程中几乎不发生径向迁移，蒸发冷却效应只发生于喷湿的局部叶高范围；由于径向非均匀进气喷湿时压气机内部质量流量会向喷湿的局部叶高范围聚集，导致喷湿的主要影响——即轴向速度的降低和轮缘功的升高在喷湿的局部范围程度较弱，而在没有喷湿的局部叶高范围程度较强。     

三维编织复合材料圆管轴向压缩性能及破坏机理

通过真空辅助树脂传递模塑成型技术，制备了三维多层缠绕编织、三维五向面芯编织和三维七向编织3种不同三维编织复合材料圆管。系统分析了三维编织复合材料圆管的纱线轨迹，分别开展了准静态轴向压缩试验，研究了不同编织工艺对三维编织复合材料圆管的压缩承载、破坏模式及吸能性能的影响。结果表明：不同编织结构圆管的轴向承载能力和破坏机制存在显著差异。三维多层缠绕编织圆管的环向纱体积含量较高，能有效承担轴向载荷，其轴向承载能力明显高于其余两类编织圆管。但由于纤维间载荷传递性能较弱，易发生脆性破坏，导致吸能效果最差。而三维五向面芯编织和三维七向编织圆管具有紧密交织的纱线结构，径向编织纱能有效限制剪切裂纹扩展，从而引发渐进稳定的开花式破坏，此类破坏具有较好的吸能特性。三维五向面芯编织圆管纤维断裂更加充分，吸能效果最为优异。     

Contributions to data transmission at critical moments on unmanned aerial vehicles

As for unmanned aircraft, the knowledge of the aircraft performance is directly related with the navigation, guidance, and control system programming. Therefore, the measured data in each phase of the flight must be sufficiently precise to obtain a good characterization of aircraft. This article proposes new methods of sending information to ground, which make it possible to know the aircraft behavior accurately, and for this purpose, four contributions have been made for ALO (Avión Ligero de Observación, Spanish acronym for Light Observation Aircraft). Currently, the characterization is based on data obtained at ten samples per second, insufficient to acquire detailed knowledge of what happened during the whole flight of an aircraft. As a result of these contributions, many more samples per second of accelerations and angular velocities are obtained at the most critical moments of the flight, such as takeoff or landing. Among the improvements included are data compression techniques, providing references to locate the measured data in time and identifying labels of each parameter.