Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

纳秒脉冲表面介质阻挡放电激励改善飞翼力矩特性的实验研究

针对飞翼布局力矩控制问题,采用纳秒脉冲表面介质阻挡放电（NS-DBD）激励,在来流风速30 m/s时,开展飞翼等离子体流动控制风洞试验,研究了不同激励参数和位置对飞翼升阻特性和力矩特性的影响。结果表明,NS-DBD激励能够有效改善飞翼大迎角气动特性。激励频率对飞翼升阻特性影响较大,激励频率为0.2 kHz时,增升效果最好,最大升力系数提高14.5%,失速迎角推迟5°。随着激励频率的增加,增升效果逐渐变差,减阻效果变好。单侧施加激励时,能够实现大迎角下飞翼模型的力矩控制,随着激励频率的增加,滚转力矩的控制效果减小,激励频率为0.2kHz时,平均滚转力矩系数变化为ΔMX=0.005691;偏航力矩的控制效果增大,激励频率为1kHz时,平均偏航力矩系数变化为ΔMY=-0.001571;俯仰力矩的控制效果减小,激励频率为0.2kHz时,平均俯仰力矩系数变化为ΔMZ=-0.002576。在中翼段和内翼段施加激励,破坏了飞翼的俯仰力矩特性,在外翼段和机翼右侧施加激励,能够显著改善飞翼的俯仰力矩特性。流场测量结果表明：等离子体激励对飞翼气动力矩的控制,主要是通过控制流动分离和控制横向流动来实现的。NS-DBD激励为改善飞翼布局稳定性和操纵性提供一种潜在的技术手段。     

基于纯比例导引的拦截碰撞角约束制导策略

拦截碰撞角约束制导是当前导弹制导研究的关键问题之一。首先基于理想比例导引（IPN）律拦截非机动目标的解析解,推导了纯比例导引律（PPN）拦截固定目标的解析解,得到了弹目相对距离、制导指令加速度和导弹前置角的显示表达式,并进一步得到了拦截碰撞角与弹目相对运动状态和比例导引系数之间的解析表达式。其次,基于该解析表达式,提出了基于PPN的拦截碰撞角约束制导策略（PPNIACG）,并探讨了在铅垂面内进行落角约束打击和水平面内进行拦截碰撞角约束打击的2种实现方式。最后,以弹道成型制导律（TSG）和最优碰撞角约束制导律（OIACG）为参考,通过数值仿真算例,对PPNIAC的拦截性能进行了对比分析,验证了所提出制导策略的有效性和正确性。     

极低压下两相流挤压油膜阻尼器油膜参数特性

针对极低供油压力工况开展实验研究,以考察气液两相流对挤压油膜阻尼器(SFD)油膜参数特性的影响。结果表明:当SFD入口气体体积分数小于0.9时,油膜阻尼随着入口气体体积分数的增加而减小,直至气体体积分数增大到0.9时,油膜阻尼是纯油状态时阻尼的60%;当气体体积分数大于0.9时,油膜阻尼大幅减小至几乎可以忽略不计。现有理论模型并不适用于极低供油压力工况。基于实验结果,找到了最符合SFD两相流动的等效黏度模型,其理论预测的油膜阻尼与不同供油压力下的实验数据吻合较好,为SFD两相流研究的模型选择提供了依据。     

Quantifying the role of solar radiative forcing over the 20th century

The 20th century temperature anomaly record is reproduced using an energy balance model, with a diffusive deep ocean. The model takes into account all the standard radiative forcings, and in addition the possibility of a non-thermal solar component. The model is parameterized and then optimized to produce the most likely values for the climate parameters and radiative forcings which reproduce the 20th century global warming. We find that the best fit is obtained with a negligible net feedback. We also show that a non-thermal solar component is necessarily present, indicating that the total solar contribution to the 20th century global warming, of ΔT_solar = 0.27 ± 0.07 °C, is much larger than can be expected from variation in the total solar irradiance alone. However, we also find that the largest contribution to the 20th century warming comes from anthropogenic sources, with ΔT_man = 0.42 ± 0.11 °C.     

Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

气动换向阀阀芯/阀座撞击特性研究

针对某型气动换向阀在研制过程中出现由于阀芯/阀座撞击变形导致阀芯卡死的现象,对阀芯/阀座的撞击特性进行了仿真研究,定量分析了撞击过程以及不同阀座高度对撞击特性的影响,根据仿真结果对换向阀进行了改进设计,试验结果表明改进后的换向阀满足使用要求.     

基于单片机的多点温度采集系统设计

随着单片机技术的迅速兴起与蓬勃发展,其稳定、安全、高效、经济等优点十分突出。为了实现多点温度数据的精确采集,采用了一种基于单片机AT89C52为核心的数据采集系统,该系统具有电路简单、功耗低、抗干扰能力强、可靠性高等优点,能够通过DBW热电阻变送器对热电阻随温度的变化而得到的模拟信号进行采集,并通过A/D转换器对模拟信号进行模数转换;同时实现基本的人机对话功能,包括使用按键设定温度报警阀值,通过LED数码直读显示检测点、温度等功能。其温度测量精度可达到1℃。     

片光反射遮挡式超高速亚毫米粒子探测技术

为满足在超高速碰撞靶上开展航天器抗空间碎片防护性能试验，需要准确测量速度3～10km／s，以及更高速度的毫米级或亚毫米级粒子的飞行速度，在可以实现毫米级粒子探测的片光遮挡式粒子探测技术基础上发展了片光反射遮挡式粒子探测技术，通过采用提高粒子直径与激光光束宽度的比值，解决了探测粒子直径小于1mm时探测信号弱不能识别等关键技术，研制了试验装置并开展了验证试验，研究结果表明该技术在0．2～10km／s速度范围内可实现直径为0．1mm量级粒子的有效探测。     

微流星体高速撞击航天器Whipple防护结构损伤特性研究(英文)

采用金刚石模拟高脆性、高熔点微流星体材料,对航天器典型Whipple防护结构进行高速撞击试验.试验表明,撞击产生的高温高压效应导致金刚石部分或全部转化为石墨,金刚石对防护结构的损伤主要体现在中低速阶段,当撞击速度大于4.3km/s时,对后板的灼烧损伤极为显著。