“嫦娥三号”探测器月尘环境分析及试验要求

"嫦娥三号"是我国首个成功实施地外天体表面就位探测的航天器,在其研制过程中充分考虑了月面环境对探测器的影响,开展了针对性设计及地面验证工作。文章综述了探测器针对月尘环境方面的设计因素,总结了月面月尘激扬的因素及其相关数值分析工作,对月尘验证试验的设计及条件制定进行了说明。相关结果或工作思路可为后续月面探测器及火星表面探测器的研制提供参考。     

模拟载人探月中航天员空间辐射风险评估

空间辐射是长期载人航天飞行任务中影响航天员健康的重要风险因素。为了探求载人探月过程中对空间辐射的合理防护方式,文章借助空间辐射场模型对"嫦娥三号"飞行任务在不同质量厚度材料屏蔽下的舱内空间辐射环境进行了仿真计算,并确定了航天员各器官接受的空间辐射剂量、剂量当量以及有效剂量等辐射防护量以进行辐射风险评估。结果表明,随着屏蔽厚度的增加,航天员的各组织或器官的吸收剂量和剂量当量以及有效剂量均明显降低;采用质量屏蔽的方法对低于100 Me V的质子具有很好的防护效果,但对高能质子或重离子的防护效果不明显。计算和分析显示,载人探月过程中,只要采取适当的防护措施,航天员的空间辐射风险是可控的。     

基于轮地作用参数和PLSDA方法的月壤力学性能评估

为评估在轨月球车周边环境月壤力学性能,以月球车辙信息、轮上载荷和滑转率作为基本参数,提出了16个二元及三元标识量,结合偏最小二乘判别方法(PLSDA)建立评估月壤力学状态模型。根据容重对模拟月壤力学状态进行分级,分别为松软状态、自然状态和紧实状态。应用轮壤相互作用试验台共采集247组试验数据,每种模拟月壤状态的试验数据按照2:1比例随机划分为校正集样本和预测集样本,最终校正集和预测集样本个数分别为166和81个。考虑到原始数据值相差大和所提出部分标识量包含冗余信息的特点,因此在建立PLSDA模型时,应用均值中心化预处理方法对原始数据进行数据预处理,并优选10个标识量建立识别月壤力学状态的PLSDA模型,对应的校正集的准确率和预测集的准确率分别为90.96%和90.12%。结果表明,应用PLSDA方法并结合月球车的车辙信息、轮上载荷和滑转率以及优选标识量所建立的评估月壤力学状态判别模型,其计算快速准确,可用于月球车在轨评估车轮前方月壤的力学特性和通过性能评估。     

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

计算模拟月壤颗粒吸收及散射特性的一种球叠加模型

针对模拟月壤复杂的外形特征以及多相非均质的微观结构,提出了一种计算模拟月壤颗粒吸收及散射特性的球叠加模型。根据模拟月壤颗粒的形状指数和分形特征识别结果,归纳了4种主要的模拟月壤颗粒类型,并采用蒙特卡罗光线跟踪法研究了这4种颗粒在单色平行光照射下的吸收及散射特性。与已有的非球形颗粒辐射特性的算法比较显示,该模型具有良好的计算准确性。在数值计算的基础上,分析了颗粒尺度参数及光学常数对其自身辐射特性的影响,并通过改变平行光照下的光线入射角度,分析了非球形颗粒的朝向对其自身辐射特性的影响。由计算结果推断,该模型不仅可以应用于计算模拟月壤颗粒的辐射特性,还可以满足其他适用于几何光学近似的非球形粒子。     

用于深层月壤采样返回的软质取心袋的设计与测试验证

月壤钻探采样技术尤其无人自主采样返回技术是我国探月工程的关键技术之一。文章提出了一种适于深层月壤钻探采样的取心机构,能够实现对月壤样品的原位包裹,以保持样品的层理特性信息。该机构选用Kevlar作为包裹样品用的软质取心袋材料,采用满足要求的编织工艺织造出致密薄壁的软袋,并对软袋进行了翻转抽拉力、力学性能及涂层测试分析等测试试验,验证其可满足深层月壤钻探采样任务的需求。     

深空探测着陆器数字化设计及着陆性能影响因素

以对称分布四腿悬架式月球着陆器为研究对象,建立了着陆器软着陆过程六自由度动力学模型并改进了月壤摩擦系数模型;在以上动力学模型基础上,以月球着陆器为例编制了着陆器软着陆六自由度动力学分析程序,利用该程序分析了探测器全机月面软着陆性能,重点研究了动力学模型中的月面等效弹性系数、月面摩擦系数和月面倾斜角度等参数对探测器着陆性能的影响。研究表明上述影响因素对着陆器着陆缓冲性能影响显著,通过对以上参数的合理选择可以有效缓解月球探测器月面软着陆的着陆冲击过载。     

应用计算几何的月面太阳辐照度仿真模型

月面太阳辐照度对月面环境分析、月面巡视器设计具有重要意义。文章提出了一种应用计算几何的月面任意位置太阳辐照度仿真模型。首先,计算太阳、地球等天体相对月面点的位置;然后,将各天体投影至以月面点为球心的天球球面,并通过裁剪运算和二维布尔运算得到太阳未被遮挡的形状;最后,利用太阳可见面积对理想太阳辐照度模型进行修正,得到通用的模型。为验证提出模型的有效性,将仿真结果与STK软件进行比较。结果表明,文章中的模型综合考虑了地球、月面等多种因素对太阳辐射的耦合影响,其与STK软件获得的结果相比,更符合真实的太阳光照状态。     

激光雷达系统在大尺寸地形扫描中的应用

为了获取模拟月面的三维地形数据,采用激光雷达系统进行专项试验场地形测量。文章分析了激光雷达系统的测量站点布局规划和位置参数设置对大尺寸地形扫描测量的影响,重点研究了激光雷达在景深条件限制下为实现最大扫描面积的有效扫描高度和扫描宽度设置。研究结果可为深空大范围扫描测量深入研究提供一定的参考。     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.