含腐蚀预损伤铝合金2024-T62的疲劳断裂行为及基于断裂力学的寿命预测

针对2024-T62铝合金薄板系统地开展了腐蚀预损伤对材料疲劳S-N曲线、小裂纹萌生行为、长短疲劳裂纹扩展及物理小裂纹门槛值扩展行为的影响等试验研究.结果表明:腐蚀预损伤对材料疲劳S-N曲线及材料疲劳小裂纹萌生行为有明显的影响,但时材料长短裂纹扩展及物理小裂纹门槛值扩展行为没有明显的影响.通过假定腐蚀预损伤为初始小裂纹...     

折叠机翼变体飞机纵向操纵性与稳定性研究

针对一种飞翼布局折叠机翼变体飞机方案,建立了相应的研究模型,使用涡格估算方法计算出机翼折叠角度对全机纵向静稳定性的影响.利用飞机纵向小扰动运动方程,分别得到了机翼展开和折叠状态的长、短周期模态,并对其动稳定性进行了讨论.结合工程估算方法和风洞试验方法,计算出内段机翼折叠过程全机力矩系数、升降舵操纵导数以及升降舵配平偏角...     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.     

国有企业改制中的政府行为分析——兼评河北省首例诉政府国企改制无效案

国企改制是一个复杂的社会问题,容易导致各种利益冲突.面对改制中的各种纷争政府应如何面对?在国企改制中政府应当做什么以及不应当做什么?本文结合国企改制中发生的一起案件,探究国企改制中政府行为存在的问题及应对措施,准确定位政府在国企改制中的角色,规范政府行为.     

Recent Developments on Damage and Fracture of Thin-Walled Complex Components Produced by Spinning

The spinning technique has been widely used in the manufacture of aerospace thin-walled axisymmetric components because of its excellent formability. Damage and fracture, as the important defects that often occur and must be avoided in the forming and service stages of components, have attracted much attention of researchers. In this paper, the fracture behavior and laws of spinning components such as conical parts, tubular parts, and components with inner ribs are summarized, the typical coupled and uncoupled ductile fracture models are introduced, and their applications in spinning are analyzed. Meanwhile, the recent developments on the modified ductile fracture model in analyzing damage and fracture mechanisms of spinning are emphatically introduced. The results could provide guidance for the selection and establishment of appropriate ductile fracture models in the finite element simulation for the accurate prediction and analysis of fracture moment, location, form, damage mechanism, and evolution law, and help the development of precision spinning techniques for high-performance thin-walled complex components.     

LY12CZ铝合金材料的室温和高温单轴循环变形行为及其时间相关性

 对LY12CZ铝合金室温和高温下的单轴循环变形行为及其时间相关特性进行了实验研究,重点讨论了环境温度、应力水平、加载波形和峰值保持对材料棘轮行为的影响。结果表明：室温和高温下,LY12CZ铝合金体现出循环硬化特性,并具有明显的应变幅值依赖性;材料的棘轮行为不仅依赖于当前的平均应力和应力幅值大小,还与加载历史密切相关。尽管LY12CZ铝合金在单调拉伸时对应变率的变化不敏感,但其循环棘轮行为具有明显的时间相关特性：有峰值保持时产生的棘轮应变明显大于没有保持时的值,并随保持时间的增加而增大;正弦波形下的棘轮应变大于三角波形下的棘轮应变。     

单晶合金蠕变性能影响因素分析

通过分析热处理工艺、元素含量、晶体取向性以及温度和应力对蠕变性能的影响,得出任何1种影响合金蠕变性能的因素其实质都是改变了合金的微观组织,并最终反映到γ′筏形的完善程度S、终端密度TD和线性密度LD上。S值越接近1,γ′筏形的完善程度越好,蠕变寿命就越长;而TD和LD值越大,微观组织图内筏形交叉和中断的数目就越多,蠕变寿命就越短。     

月面巡视探测器行为控制初探

阐述了月面巡视探测器几种行为控制结构的特点,详细阐述了巡视探测器的导航运动控制方式,研究了国外巡视探测器的导航运动控制特点;并以此提出了巡视探测器基于模糊逻辑的分层行为控制模式,举例说明了巡视探测器的行为描述方式。     

基于FGN输入流的G/D/1排队模拟

传统的排队理论不适于分析高速网络表现出的自相似流量.通过实验仿真,主要考察平均等待时间和在队列分别为无限和有限情形下的队列尾部特征等参数,并对以FGN为输入流的G/D/1排队模型作了定性分析.结果表明在输入流的强度和方差基本相等且系统利用律大于某一阈值的情况下,队列平均等待时间随Hurst参数增大而显著增长.同时指出在相同的条件下考察队列尾部特征,具有有限队列长度的G/D/1排队模拟结果要远优于无限队列长度下的理论分析结果.      

超高频脉冲电弧焊接熔池金属流动行为

熔池金属流动一方面受电弧行为影响,另一方面与凝固组织形核、结晶过程联系紧密,是电弧焊接基础研究的关键,针对电弧力作用研究了超高频脉冲电弧焊接(UHFP-AW,Ultra High Frequency Pulsed Arc Welding)熔池金属流动特点,采用理论研究与试验分析相结合的方式对熔池流动方式、强度、温度分布等要素进行了分析,并完成了液态金属表面运动特征监测.结果表明,超高频脉冲电弧对熔池液态金属的热、力作用显著,表面流体流速大于30cm/s,UHFP-AW电弧力造成熔池表面沉降变形,引起双环流,熔池温度扩散范围相应减小,有效降低了电弧热量对母材金属的影响,尤其在钛合金焊接中对控制焊缝晶粒尺寸具有重要意义.