宽马赫数路德维希管风洞及其关键技术

随着高马赫数飞行器研制需求的增加，急需脉冲型风洞运行范围向中低马赫数段扩展，特别是需要具有跨马赫数运行能力。以路德维希管原理运行的管风洞试验设备，由于建设及使用成本较低、参数调节方便、流场品质高等优点，已在亚/跨/超声速及高超声速领域得到了发展和应用，体现出了宽马赫数的应用潜力。本文分析了宽马赫数脉冲型风洞发展现状，重点介绍了路德维希管风洞及其在宽马赫数应用中急需解决的关键技术，包括宽马赫数喷管设计技术、高温管外加热技术以及高温高压隔离技术。     

高超声速飞行器跨流域气动力／热预测技术研究

分析了跨流域流动特点、工程背景需求、国内外研究现状,针对高超声速飞行器跨流域气动力／热预测存在的主要问题,从粘性干扰参数与克努森数搭接的跨流域模拟准则、微量天平结构优化及测力技术、红外大面积中低量值热流测量技术、流场显示与测量技术和 N-S／DSMC 自适应紧耦合数值模拟方法等方面,总结了近年来取得的研究进展,并讨论了下一步研究方向。     

侧载及加热方位对槽道内临界热流密度影响

为了研究侧载以及加热方位对矩形窄缝槽道内临界热流密度特性的影响,在旋转平台上进行了两相流的超重力实验.以蒸馏水为工质,通过改变质量流速、入口温度、侧载大小以及加热方位,获得了发生临界换热现象时的质量流速、实验段压降和壁温的变化趋势,考察了侧载和加热方位对临界热流密度的影响规律,并对侧载下两相流不稳定性进行了简析.实验表明:发生临界换热时,壁温迅速上升,有效加热热流开始减少,关闭加热电源后,实验段压降下降、质量流速回升较明显;侧载以及不同的加热方位对临界热流密度有明显影响;临界热流密度发生前后,蒸汽回流导致进口温度上升,增加了流动的不稳定性.      

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

高温高速气流总焓接触测试法对比分析

发动机尾焰、燃烧加热、电弧加热器等高温高速气流总焓测量存在较大误差,采用结构优化的质量吸入水冷焓探针,标定后的驻点热流和驻点压力探针(Fay-Riddell公式法)对高温高速气流总焓进行了对比测试。结果表明:焓值为2.5~5 MJ/kg时,焓探针的测试误差约为3.38%,采用Fay-Riddell公式法获得焓值的误差约为3%。焓探针与Fay-Riddell公式法平均偏差约为4.65%。在地面模拟试验时采用两种测焓方法确定测试精度,对减小高温高速气流测焓误差,提高试验模拟精度具有积极的作用。     

基于混合控制集预测控制的永磁同步电机电流脉动抑制方法

模型预测控制(MPC)技术近年来在高动态性能电机驱动系统中应用广泛。为了克服传统MPC技术中有限控制集(FCS)造成的稳态电流脉动问题,提出了一种基于混合控制集(MCS)预测控制的永磁同步电机(PMSM)电流脉动抑制方法。分析建立PMSM预测控制系统离散数学模型,并分析电压矢量精度与电流脉动之间的关联性；在此基础上,MCSMPC将电压源型逆变器有限的有效电压矢量数,扩展为多个以占空比形式存在的虚拟电压矢量,并基于上述虚拟电压矢量完成MPC优化问题在线求解；此外,考虑到MCSMPC系统的参数敏感性问题,对MCSMPC系统反馈噪声问题进行分析讨论。最后,搭建双15 kW PMSM对拖样机测试平台进行试验分析,分析内容包括MCS方法动态跟踪特性、电流脉动稳态效果。试验结果表明所提出的MCSMPC方法在保留了传统预测控制技术高动态响应的基础上,可有效降低PMSM稳态电流脉动幅度和运行噪声。     

地源热泵技术在建筑节能中的应用

本文探讨如何通过地源热泵技术实现建筑节能。研究通过地源热泵来实现一机多用,使其既能用于冬季供暖,又可以用于夏季制冷。同时也讨论了如何与太阳能相配合,来实现地热平衡。文中还给出了通过插值法和曲线拟合法对测量数据进行处理获得变温带和增温带的温度-深度曲线的方法。     

暴时极光区热层大气焦耳加热与F区电离耗空的EISCAT雷达观测

利用ＥＩＳＣＡＴ雷达探测数据，分析计算了太阳活动高年夏季发生的一次强磁暴期间，极光区电离层对流电场、电导率以及焦耳加热速率等着重考察了Ｅ区热怪大气焦耳加热和Ｆ区离子摩擦增温与Ｆ区电子密度耗空的关系发现在下午东向极光电集流期间，电子密度最大耗空出现在Ｆ区３００－３２５ｋｍ高度，时间恰在积分的Ｅ区大气焦耳加热量大值和Ｆ区最大离子增温之后５－１０ｍｉｎ，耗空率达７０％。     

磁-光/涡流成像技术的有限元分析

近年来迅速发展的磁－光成像（ＭＯＩ）技术使涡流检测技术得到了新的进展。本文运用磁－光／涡流成像的有限元模型对典型的飞机构件缺陷（如连接飞机表面两个铝层的紧固件下面的裂纹）进行模拟。模拟结果表明，其磁场垂直分量的变化对这种结构来说是相当灵敏的，采用ＭＯＩ技术可以用来探测隐藏在紧固件帽下面的缺陷。     

Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.