工件表面轮廓均方根斜率的光散射测量

描述并确定具有明显纹理粗糙表面均方根斜率的光散射技术(均方根斜率是联合表面轮廓高度和波长特性的混合参数)。称为散射光锥法(The scattered light-conemethod)的该技术是基于激光角散射检测阵列(DALLAS——Defector Array for Laser LishtAngular Scattering),它用于测量粗糙表面散射光角分布的仪器。均方根斜率是从DALLAS光散射图象的角宽得到的。一般可以发现角宽(即估计的均方根斜率)对光的入射角和散射角变化相当大时是不敏感的。这些结果与表面材料无关,并且对正弦和随机粗糙表面都是有效的。介绍了散射光锥法的测量原理、实验、数据分析和几点结论。     

Precise line-of-sight modelling for angles-only relative navigation

This work presents a precise analytical model to reconstruct the line-of-sight vector to a target satellite over time, as required by angles-only relative navigation systems for application to rendezvous missions. The model includes the effects of the geopotential, featuring: the analytical propagation in the mean relative orbital elements (up to second-order expansion), the analytical two-way osculating/mean orbital elements’ conversion (second-order in $J_2$ and up to a given degree and order of the geopotential), and a second-order mapping from the perturbed osculating elements’ set to the local orbital frame. Performances are assessed against the line-of-sight reconstructed out of the precise GPS-based positioning products of the PRISMA mission. The line-of-sight modelled over a far-range one day long scenario can be fitted against the true one presenting residuals of the order of ten arc-seconds, which is below the typical sensor noise at far-range.     

INS/SAR组合导航量测信息不同步的滤波算法

在惯性导航系统/合成孔径雷达(Inertial navigation system/synthetic aperture radar,INS/SAR)组合导航系统中,传统的SAR只提供位置和航向角信息,本文引入SAR图像测速系统,实现对INS速度信息的补偿修正。同时,建立了该组合导航滤波的数学模型。针对图像匹配耗时较大、产生信息不同步的现象,本文利用INS信息增量来对SAR导航信息延迟、非等间隔以及SAR量测不在INS滤波离散间隔上所带来的误差进行修正,并进行了仿真。经过1 500s后,本导航系统导航信息没有出现发散,在飞行器出现加速、爬升、转弯等机动时,位置误差绝对值不超过36.8m,高度误差绝对值不超过18.1m,航向角误差绝对值不超过5.3′,速度误差绝对值不超过0.5m/s,并与曲线拟合法作对比,仿真结果表明本文算法能够有效提高INS/SAR组合导航系统的精度,并为其他组合导航系统提供参考。     

双轴连续旋转调制捷联惯导系统大失准角初始对准技术

由于可以补偿惯性器件在三个轴向上的输出误差，双轴旋转调制技术被广泛应用于捷联惯导系统(SINS)。选择了一种合理且实用的十六次序双轴转位方案，并对其调制原理和误差进行了分析。初始对准技术是捷联惯导系统的一项重要技术，其对准精度直接决定了后续导航的精度。在粗对准完成后，当姿态误差角较大时，后续的精对准误差模型呈非线性特性，故选择了滤波精度高、稳定性强的平方根容积Kalman滤波算法(SCKF)来解决这一问题。考虑到在实际对准过程中，量测噪声的统计特性易发生变化，将SCKF算法与Sage-Husa算法相结合，在传统Sage-Husa SCKF算法的基础上提出了一种改进的自适应滤波算法(ASCKF)。该算法采用QR分解来完成对噪声协方差的平方根矩阵估计，从而避免了传统Sage-Husa SCKF算法中所估噪声协方差矩阵不正定的问题。最后，通过仿真证实了ASCKF算法可被很好地应用于量测噪声统计特性发生变化的初始对准中。     

基于双力源的叠加式多维力传感器校准装置研究CSCD

介绍了一种基于叠加机原理的双力源多维力传感器校准装置的设计与研制,对装置的测量不确定度进行了分析,通过对三分量力传感器的校准实验,证明了校准装置不仅可以对多分量力传感器进行单分量校准,还能方便地实现耦合误差的校准。     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Geometric calibration of Colour and Stereo Surface Imaging System of ESA’s Trace Gas Orbiter

There are many geometric calibration methods for “standard” cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.     

基于ANFIS的智能导航自适应滤波算法研究

智能导弹等智能化飞行器在快速跨域、高速机动飞行时,由于传感器切换、外形改变等因素,会对组合导航信息融合系统引入随机非Gauss噪声等影响,离线优化的参数往往不能满足滤波器精度的需求。自适应网络模糊推理系统ANFIS是一种将人工神经网络和模糊推理技术相结合而成,符合人类认知特点的决策方法,它可以对导航数据进行学习,实现智能决策、实时修改滤波器内部参数,对滤波器进行优化。仿真结果表明,基于ANFIS优化的智能导航自适应滤波算法可以有效减少噪声和干扰带来的影响,提高导航精度。