利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

The Cassini Cosmic Dust Analyzer

The Cassini-Huygens Cosmic Dust Analyzer (CDA) is intended to provide direct observations of dust grains with masses between 10⁻¹⁹ and 10⁻⁹ kg in interplanetary space and in the jovian and saturnian systems, to investigate their physical, chemical and dynamical properties as functions of the distances to the Sun, to Jupiter and to Saturn and its satellites and rings, to study their interaction with the saturnian rings, satellites and magnetosphere. Chemical composition of interplanetary meteoroids will be compared with asteroidal and cometary dust, as well as with Saturn dust, ejecta from rings and satellites. Ring and satellites phenomena which might be effects of meteoroid impacts will be compared with the interplanetary dust environment. Electrical charges of particulate matter in the magnetosphere and its consequences will be studied, e.g. the effects of the ambient plasma and the magnetic field on the trajectories of dust particles as well as fragmentation of particles due to electrostatic disruption.The investigation will be performed with an instrument that measures the mass, composition, electric charge, speed, and flight direction of individual dust particles. It is a highly reliable and versatile instrument with a mass sensitivity 10⁶ times higher than that of the Pioneer 10 and 11 dust detectors which measured dust in the saturnian system. The Cosmic Dust Analyzer has significant inheritance from former space instrumentation developed for the VEGA, Giotto, Galileo, and Ulysses missions. It will reliably measure impacts from as low as 1 impact per month up to 10⁴ impacts per second. The instrument weighs 17 kg and consumes 12 W, the integrated time-of-flight mass spectrometer has a mass resolution of up to 50. The nominal data transmission rate is 524 bits/s and varies between 50 and 4192 bps.This revised version was published online in July 2005 with a corrected cover date.     

火星磁层顶形成和变化的理论研究

考虑太阳风动压与行星电离层中的带电粒子热压及磁压之和平衡，建立了有大气（电离层）的行星磁层顶形成的理论模型，结合卫星对火星的观测数据，对子午面内向日侧火星磁层顶位形进行了数值计算和分析，研究了火星磁层顶位形及其与太阳风动压之间的变化关系．结果认为，火星磁层顶位形与地球磁层顶相似．太阳风动压越大，火星磁层顶越靠近火星；太阳风动压越弱，火星磁层顶越远离火星．根据火星内秉磁矩从古到今逐渐减小的观点，探索了大尺度磁场（内禀磁矩）对火星磁层顶的贡献作用，结果认为大尺度磁场越强，火星磁层顶越远离行星．这对于进一步研究火星磁层的长期演化以及其他行星磁层的位形变化都具有重要的意义．     

火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用，同时还将与火星表面航天器发生对流换热。热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响，从而确定主要的控温途径。在调研火星表面辐射、大气等热环境的基础上，从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响。器表辐射传热系数随光学属性和温度的变化范围为0.3～1.4W/(m2·℃)，对流传热系数随风速变化为0.2～1.5W/(m2·℃)，器内导热传热系数可控制在0.25W/(m2·℃)以下。结果表明，太阳辐射较火星表面和天空辐射而言是主要外热源，航天器表面的辐射和对流换热为两条并联换热途径，两者均可成为主要换热途径，器内导热传热是控制航天器内外隔热的主要可控因素。     

防风网对煤堆遮风效果的风洞实验研究

为了考察防风网对堆场煤堆的遮风效果,进行了防风网与煤堆之间区域的流场可视化实验。使用风洞模拟大气边界层条件,并将开孔率为38.5%的防风网模型布置在煤堆模型前方。实验中采用粒子成像测速(PIV)系统测量了防风网和堆场区域的平均风速分布,并且获得了煤堆表面的摩擦风速分布,进一步估算煤堆起尘量的变化情况。实验发现,防风网可有效降低煤堆表面迎风区域的摩擦风速,而对背风面的流场分布影响较小。研究结果可为防风网的遮护作用提供一定的实验支持。     

一种主动悬架式火星车稳定裕度优化控制策略

针对火星车在非结构化环境下行驶存在的稳定性不足而导致倾覆的风险，提出针对一种六轮主动悬架式火星车的稳定裕度优化控制方法。首先，考虑了火星车悬架机构调整过程中车轮与接触地面滑移和侧倾等运动关系，建立和完善了六轮主动悬架式火星车行驶的运动学模型。然后，以火星车夹角调整机构角度为变量，推导火星车在非结构环境下的稳定裕度模型。之后，使用内点法求解火星车稳定裕度的最优解，并获得期望的夹角调整机构关节角度。在此基础上，对夹角调整机构的关节角度进行规划和控制，实现火星车悬架机构构型的调整，从而提高火星车在非结构化环境下行驶的稳定裕度。最后，对火星车稳定裕度优化控制策略的有效性进行仿真验证，结果表明，所提出的控制方法可有效提高火星车在非结构化环境下行驶的稳定裕度。     

火星大气进入段抗饱和固定时间阻力加速度跟踪制导律设计

研究了具有固定时间收敛特性的火星探测器大气进入段的标称轨迹跟踪制导问题。首先，针对横向运动，给出与速度成线性关系的航向误差漏斗走廊形式，完成了倾侧角的反号逻辑设计。与横程漏斗走廊反号逻辑相比，该逻辑计算量小，更适用于宇航计算机。与航向误差宽度走廊反号逻辑相比，该逻辑在高速状态下能够避免倾侧角的频繁切换，可提高任务成功的概率。其次，针对纵向运动，通过RBF神经网络补偿了倾侧角饱和问题，利用积分滑模设计了阻力加速度固定时间饱和跟踪制导律，其不仅可有效消除滑模控制的抖振问题，且将跟踪误差以两种不同形式引入制导律，能够加速收敛，能够保证跟踪误差在固定时间内快速收敛至0。最后，通过数值仿真验证了所设计的横向倾侧角切换逻辑和纵向制导律对标称轨迹的快速、精确跟踪能力。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

火星大气来流模拟装置CFD仿真与试验

根据我国火星着陆巡视器工作过程,其着陆发动机需要在相对火星大气高速迎风运动中可靠点火。由于巡视器着陆时发动机喷管出口气流与火星稀薄气流方向相反,目前无法通过理论计算准确获得着陆过程的动态流场对发动机起动过程的影响量值。为验证火星着陆环境下发动机点火的适应性,需要建立发动机的火星大气来流试验环境模拟条件。为模拟发动机在火星大气条件下的相对运动,在真空舱内发动机保持固定,前端设置环形来流形成装置,该装置在发动机喷管周围形成一定速度的逆向来流包络。采用数值模拟技术结合试验验证方法,在火星着陆器巡视器主发动机性能考核试验中,针对来流的形成装置开展了设计研究工作。来流模拟试验测试数据表明:在确保贮箱供应压力稳定的条件下,来流模拟系统能够形成100~200 m/s速度的稳定来流,发动机在来流下能稳定启动工作,真空舱压力满足试验要求。     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.