迎角受限的高超声速飞行器固定时间鲁棒控制

针对高超声速飞行器动力学模型强耦合、非对称时变迎角限制、气动参数高度不确定以及跟踪误差收敛速率要求高等问题,设计了一种考虑非对称时变迎角限制的高超声速飞行器固定时间非奇异切换控制策略。为了解决非对称时变迎角限制问题,首先限制迎角虚拟控制器的幅值并设计固定时间误差补偿系统补偿迎角虚拟控制器饱和带来的不利影响,然后设计了一种新的光滑切换的非对称时变障碍函数限制迎角跟踪误差,从而使迎角满足非对称时变限制。光滑切换技术以及固定时间收敛技术也应用于其他虚拟控制律和实际控制律的设计中,以避免奇异值问题并且保证闭环系统的固定时间稳定。此外,设计了一种固定时间稳定的鲁棒补偿器用以补偿系统不确定性带来的不利影响。严格的数学推导证明了本文方法的正确性,仿真结果验证了本文方法的有效性和优越性。     

三维激光成像系统的点云模型真彩色处理方法

三维激光成像系统获得的点云数据精度高并且保有高精度的高程信息,然而特征信息不明显,没有保留全部的点和点的拓扑关系,无法直接判读地面物体;影像数据空间分辨率和精度低,并且缺少高程信息,然而其影像的特征连续,光谱信息丰富.因此,进行点云数据与影像数据融合方法的研究是目前三维激光成像系统研制的前沿性课题.针对点云数据与影像数据融合方法的研究,提出了一种三维激光成像系统点云模型真彩色处理的方法.实验结果显示,采用所提出的方法,不仅能够获得被扫描物体的位置信息和大小信息,而且能够得到被扫描物体的表面纹理细节信息.     

无线传感器网络时间同步协议动态切换机制

针对当前无线传感器网络时间同步协议通用性差的问题,提出了基于主动编程思想的时间同步协议动态切换机制,设计了能够动态适配的时间同步协议切换框架,重点讨论了节点间相互通信、时间戳标记、协议切换、本地时间与全局时间的转换等4个关键问题,并且在TinyOS（Tiny Operating System,微操作系统）平台上对新机制进行了仿真验证,比较了新机制同2种主流时间同步协议之间的性能差异.仿真结果表明：新机制能实现时间同步协议的动态配置,提高协同效率,节省切换开销,具有良好的应用前景.     

Stochastic modelling considering ionospheric scintillation effects on GNSS relative and point positioning

Global Navigation Satellite Systems (GNSS), in particular the Global Positioning System (GPS), have been widely used for high accuracy geodetic positioning. The Least Squares functional models related to the GNSS observables have been more extensively studied than the corresponding stochastic models, given that the development of the latter is significantly more complex. As a result, a simplified stochastic model is often used in GNSS positioning, which assumes that all the GNSS observables are statistically independent and of the same quality, i.e. a similar variance is assigned indiscriminately to all of the measurements. However, the definition of the stochastic model may be approached from a more detailed perspective, considering specific effects affecting each observable individually, as for example the effects of ionospheric scintillation. These effects relate to phase and amplitude fluctuations in the satellites signals that occur due to diffraction on electron density irregularities in the ionosphere and are particularly relevant at equatorial and high latitude regions, especially during periods of high solar activity. As a consequence, degraded measurement quality and poorer positioning accuracy may result.     

数控纤维缠绕机芯模处理软件的研究

给出了离散点输入芯模的数学处理过程，从而对任意给定的芯模轮廓曲线有了统一的处理方法，统了一芯模输入，为非测地线缠绕软件的输入芯模“微元化”提供了理论依据，并为后面的缠绕计算奠定了基础。     

基于工作过程的航空维修工程实习的改革*

在定位分析航空维修工程专业所面向的岗位、工作任务以及完成任务所要求具备的职业能力的基础上，研究运用基于工作过程的实践教学方法进行教学内容和方法设计的改革，构建并优化了案例库。实践表明，该教学改革可充分发挥学生的主体作用，提高了学生实践技能，增强了学生的工程意识。     

缩短工时创造就业岗位的现实选择

缩短工时能够创造就业机会，提供有效的就业岗位。本文分析比较了国内外就业理论和创造就业实际操作过程的政策选择，认为：应该抓紧对实行35小时／周工作制的研究，并尽快出台相关法案。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.     

电火花多次切割提高硬质合金表面质量的研究

阐述了硬质合金材料的电火花线切割加工特点.通过采用限位棒、恒张力装置提高电极丝的空间稳定性,并在前两次切割采用复合工作液最后精修采用煤油作为工作介质对硬质合金YG8进行了多次切割.试验结果表明,多次切割的加工表面粗糙度达到1μm以下;与采用复合工作液精修后的加工表面相比,煤油精修后的加工表面微裂纹和微孔洞均明显减少,获得较好的加工表面质量.