Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

含有不平衡飞轮的卫星精确动力学模型研究

针对含不平衡飞轮的卫星动力学模型,给出了不平衡飞轮的转动惯量矩阵。用多刚体建模方法,建立了综合的完整姿态动力学分析模型,提出了质心位置的计算方法。通过飞轮系统的完整精确模型,将飞轮扰动对三轴姿态稳定卫星的影响反映至滚转一俯仰一偏航三轴姿态。Matlab／Simulink环境中仿真验证了该系统角动量为常值。分析了不平衡飞轮对卫星姿态的影响,并解释了模型的应用。研究表明飞轮扰动影响不可忽略,精确的动力学模型对未来航天器的应用有重要意义。     

混合三元系超大集

对于三类混合三元系超大集Ti-OLGD（v）（i=1,2,3）,T1-OLGD（v）和T2-OLGD（v）的存在谱已经完全解决了,而对于T3-OLGD（v）的存在性问题,所知结果很少。本文利用代数和组合设计相结合的方法,主要利用有限域的相关知识,对于T3-OLGD（q-1）（q为素数幂）,给出了一种新的构造方法,从而得到了一系列的结果。     

新一代航天运输系统测发控技术发展的方向

随着信息技术的发展,运载火箭测发控系统的自动化程度大大提高,但技术的进步带来了要求的提高,使得测发控系统又显现出诸多不足.本文通过梳理当前测发控系统存在的主要问题,提出智能、全面、便捷应是未来测试发射控制技术努力的方向,以达到减少发射专业保障队伍、提高测试覆盖性和真实性、简化发射场操作的目的.文中提出的相关技术,部分已在我国新一代运载火箭中得到应用.随着这些技术成熟度的提高,将极大地提升长征系列运载火箭的竞争力.     

时差定位卫星簇的时域关联干扰方法研究

时差定位卫星簇对地表的辐射源存在很大威胁.为保护目标辐射源,在分析时差定位卫星簇TDOA脉冲配对的原理的基础上,提出一种新的主动干扰方法.即通过控制干扰脉冲与辐射源脉冲之间的时域关联关系,达到欺骗时差定位卫星的TDOA估计.仿真计算表明,适当的脉冲发射时间和脉冲宽度的同频干扰源对辐射源位置信息的保护具有可行性和有效性.     

电子信息系统复杂电磁环境效应研究初探

电子信息系统复杂电磁环境效应是指复杂电磁环境对电子信息系统的影响,是一个涉及社会和国防多个应用领域的重要问题.从电子信息系统复杂电磁环境效应概念出发,首先与电磁环境效应概念进行了比较分析,继而将研究分解为复杂电磁环境特性与模拟、复杂电磁环境综合效应机理和电子信息系统效能评估理论三个方面,最后给出了这三个方面的具体研究思路,并探讨了开展研究的一般性方法.     

机载超短波干扰装备战术性能评估方法研究

分析机载超短波干扰装备在现代作战中的作战对象和任务使命,从侦察能力、测向能力、干扰能力和系统稳定性四个方面构建衡量超短波干扰装备战术性能的指标体系,提出运用模糊综合法分析其综合性能的方法,并通过实例验证了评估方法的可行性.     

太赫兹固态电子器件和电路

随着微电子技术的飞速发展,半导体器件的截止频率已经进入到太赫兹频段,太赫兹电路的频率特性特性得到极大发展。以固态器件为基础的电路的工作频率进入到太赫兹频段。太赫兹固态电子器件与电路技术在空间领域有着重要的应用前景。文章重点介绍InP基三端太赫兹固态电子器件和电路,以及太赫兹肖特基二极管器件和电路的技术发展过程与最新动态。并指出随着器件与电路的整体化与集成化发展趋势,太赫兹单片集成技术是其未来发展方向。     

基于无人机平台的机动式标校系统设计与应用

随着我国航天事业的不断发展,地面卫星测控网也日益完善,呈现出数量多、分布广、频段宽、工作体制多等特点。为提高航天测控装备标校的精度和效率,克服传统标校方式所具有的造价高、操作繁杂等缺点,研制了一套车载机动式、基于无人机(UAVs)平台的航天测控装备标校系统。该系统采用实时载波相位差分定位(RTK)技术,配备多类高度集成小型化目标载荷,可对地面统一测控、雷达和光电装备进行精度鉴定以及日常进行大动态范围标校和训练等工作。首先,介绍了系统的工作原理、系统组成及精度鉴定数据处理流程;其次,基于外场实验,给出了该系统的鉴定效果;最后,相较于目前测试性能单一的标校系统,该系统具有集成度高、机动性强、覆盖频段广、可完成性能实验多等优点,有更好的使用和推广价值。