AN IMPROVEMENT FOR LOWER－ORDER PANEL METHOD BASED ON THE DIRICHLET BOUNDARY CONDITION

ＡＮＩＭＰＲＯＶＥＭＥＮＴＦＯＲＬＯＷＥＲ－ＯＲＤＥＲＰＡＮＥＬＭＥＴＨＯＤＢＡＳＥＤＯＮＴＨＥＤＩＲＩＣＨＬＥＴＢＯＵＮＤＡＲＹＣＯＮＤＩＴＩＯＮＸｕＭｉｎｇｃｈｕ，ＧｕＷｅｎｙｉｎｇ（ＮｏｒｔｈｗｅｓｔｅｒｎＰｏｌｙｔｅｃｈｎｉｃａｌＵｎｉｖｅｒ...     

一种颤振分析新方法

本文提出一种颤振分析新方法－正交搜索法，其本思想是依据解析函数的保角映，沿复变量实部和虚部交替搜索，逐步达到所求方程的根。完全非定常气动力由格林九方法直接计算，颤振分析结果准确。该算法可在计算机上执行，有一定推广价值。     

专用工作测力机不确定度评定

主要介绍了在JJF1134-2005<专用工作测力机校准规范>(以下简称规范)的不确定度评定过程中出现的若干问题.为了明确各个分量的定义及其公式的使用,我们对某些量的含义作了相应的解释并给出了具体的运算操作,对相关人员有参考价值.     

过冷状态下二维枝晶生长的相场方法模拟

通过相场理论建立了纯物质镍在过冷溶液中枝晶生长的相场模型。把相场方程和温度场方程进行耦合,建立了相对应的相场模型。该模型以熵增加函数为基础,通过熵增加函数推导出热力学一致性的相场控制方程。利用上述的模型和方法在计算机上编制二维组织凝固模拟程序得出结论,各向异性强度影响枝晶尖端生长速度,过冷度决定凝固速度的快慢。     

模糊数学在考试成绩分析中的应用

本文将模糊集合理论应用于考试分析，提出了一种对考试成绩的总体分布进行估计的较合理、有效的方法。     

UDMH颗粒物中絮状团聚物的裂解质谱及红外光谱分析

在不同试验务件下，采用裂解质谱及红外光谱分析方法对偏二甲肼(UDMH)颗粒物中絮状团聚物的成分进行了研究。结果表明，絮状团聚物的主要成分为聚四氟乙烯，另舍有少量UDMH及其氧化产物和细沙状颗粒物。细沙状颗粒物中可能舍有SiO2或有机硅氧烷化合物。     

用定标块准确确定圆度仪的放大倍数

用定标块校准圆度仪的放大倍数时，一般是将定标块在圆度仪上测量的圆记录放大轮廓图用同心圆模板对线，找出凹下轮廓的径向放大值，然后除以定标块小平面弦高的实际值，其商即为放大倍数。但是，这种方法的缺点是测量准确度不高，不适用于圆度仪自动化程度日益提高带来的快速数字采样自动化校准放大倍数的要求。根据未抑制的定标块圆记录放大轮廓的凹下部分为一弦线的特点，推导了式（８）～（１３）。按要求的采样相邻点的夹角在弦线中点附近的直线上找出三个连续采样值，代入式（８）～（１３），可准确计算出圆度仪的放大倍数。用实例验证了这种新方法的准确性和可行性。     

桁架结构的静动态特性有限元分析

通过对桁架结构的静、动态分析，探讨如何建立桁架的有限元模型及计算方法，并利用MSC．Patran／Nastran程序对该结构进行静、动态分析计算，计算结果与实际情况吻合。     

电磁兼容性标准的剪裁及应用

依据有关的电磁兼容性标准，并结合国内外的情况，着重对电磁兼容性标准剪裁的必要性、方式、方法、时机和分工问题进行了论述，同时提出在项目剪裁中应注意的问题。     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.