Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。     

可展开式辐射器热控对航天器轨道调整的适应性分析

为提高航天器热控系统对轨道调整的适应能力，本文研究了与流体回路耦合的可展开式辐射器热控方案在不同轨道高度下的热控性能，分析了不同轨道高度时辐射器面临的热环境的影响，在不同轨道高度下比较了固定辐射器与可展开辐射器的热控特性。结果表明，随着辐射器展开角度的变化，辐射器吸收的空间热流随之发生变化，从而对热控系统的散热能力带来直接影响，调节辐射器的角度可以扩大其对外散热能力。在工程应用中，基于热控流体回路，通过调节可展开式辐射器的展开角度，可以有效提高航天器的轨道热适应能力。     

国际空间太阳能电站的技术进展

综述了当前国际空间太阳能电站技术的研究进展与发展趋势。重点介绍了空间太阳能电站系统方案新构思“太阳塔”和“太阳盘”的特点；介绍了空间太阳能电站的主要相关技术———无线电能传输技术、太阳能转换技术和空间运输技术等的发展趋势；最后简要介绍了月球电站的进展情况。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

混合三元系超大集

对于三类混合三元系超大集Ti-OLGD（v）（i=1,2,3）,T1-OLGD（v）和T2-OLGD（v）的存在谱已经完全解决了,而对于T3-OLGD（v）的存在性问题,所知结果很少。本文利用代数和组合设计相结合的方法,主要利用有限域的相关知识,对于T3-OLGD（q-1）（q为素数幂）,给出了一种新的构造方法,从而得到了一系列的结果。     

MPPT不调节母线电源系统稳定性分析

提出了一种MPPT不调节母线电源系统拓扑结构,介绍了其控制策略。分别建立了两域控制模式下太阳电池阵源端与负载端稳态分析的等效电路模型,基于小信号等效分析及状态空间方程特征根求解方法,对系统稳定性进行分析,归纳了提高此类电源系统稳定性设计的方法,此研究结果可为MPPT控制技术在未来空间电源系统中应用提供设计参考。     

模块航天器间激光无线能量传输系统方案设想

模块化航天器是未来航天器发展的重要方向,模块航天器之间的能量传输是实现模块化功能应用的关键技术。文章针对模块化航天器系统能量分配需求,对无线激光能量传输技术进行了研究。阐述了无线激光能量传输系统的功能组成,建立了系统框架模型,分析了系统的关键技术,并对系统各组成模块进行了初步设计。在此基础上对激光传能系统进行了试验验证,获得了理想的光电转换效率。文章的研究成果可为我国模块航天器的发展提供技术支持。     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

基于极大似然估计器的GNSS矢量跟踪算法

矢量跟踪是一种将全球导航卫星系统(GNSS)接收机的信号跟踪与导航解算融为一体的跟踪算法。传统的基于矢量延迟/频率锁定环(VDFLL)的跟踪算法普遍采用延迟锁定环(DLL)和锁频环(FLL)鉴别器计算伪距和伪距率偏差观测量,由于锁频环鉴别器存在近似误差和一步延迟效应,在高动态环境下容易造成环路失锁。从直接估计卫星信号特征参数的角度出发,基于中频信号模型构建码相位和载波多普勒的极大似然代价函数,采用非迭代估计算法得到各通道码相位和多普勒频移的估计偏差,转换为卡尔曼滤波器的观测矢量,提出一种基于极大似然估计器(MLE)的矢量跟踪算法。理论分析和仿真结果表明:新算法结合了极大似然估计和矢量跟踪的优点,克服了FLL的延迟效应,与基于VDFLL的矢量环路相比,高动态环境下的跟踪稳定性更好,可以对被遮挡的卫星保持持续的跟踪。