The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

A systematic spatial bias in remembering eye positions

Categorical bias in location memory in geometric spaces is well established. The present study assessed the presence of the bias in locating eyes in images of human faces. Participants were presented with digital faces and indicated the position of one of the eyes in both upright and inverted orientations. Biases resulted from participants using multiple sources of accessible information. No differences were found for upright vs. inverted face images. Overall, the data were consistent with the retrieval category adjustment model. These distortions may be considered within the forensic context, when eyewitnesses work with a sketch artist or use a computer program to generate an image of the culprit.     

智能化VXI总线高性能同步数据采集模件的设计

介绍了一种基于VXI总线的高速隔离智能同步数据采集模件的设计方案 ,分析了主要电路的技术要点和实现方法     

UV镜对摄影测量精度的影响及消除方法研究

针对摄影测量中加入UV镜后对测量结果的影响问题进行了研究。通过理论推导UV镜对于像点坐标偏移的影响,得出UV镜对像点偏移的影响规律,并提出采用自检校光束法平差的方法消除UV镜对像点偏移的影响,实验证明本文得出的对UV镜产生的像点偏移规律的分析及解决方法都是正确的。     

GE90-70双机热备冗余控制系统在进排气调压系统中的应用

本文介绍了进排气调压系统测控改造的总体结构、通信网络、软件设计和系统功能。该系统以GE90—70的可编程控制器（PLC）为基础,将Ethernet和现场总线Genius相结合进行数据通信,采用下位机编程软件Cimplieity Machine Edition、上位机组态软件Cimplicity HMI编制设计软件系统,使整个系统具有较好的可靠性和可扩展性。能实现进排气压力调节的工况显示和过程控制。实际运行表明,该系统结构先进,控制可靠,配置灵活,可进一步提高高空台试验效率,降低试验风险。     

管道喷涂机器人:结构与位姿调整

针对工业上大型管道内壁喷涂的需求,设计了用于喷涂管道的机器人,该机器人采用串并联结构形式,由支撑平台和串联机械手组成.支撑平台采用几何的方法建立数学模型,串联机械手采用D-H参数法建模;并在数学模型基础上给出了逆解方程.位姿调整时,对机器人进行初定位,利用激光跟踪仪测量出管道和机器人的位姿,求解出调整量,对机器人进行位姿调整,使喷枪旋转轴和管道轴线重合.管道喷涂机器人在工厂进行试验测试,测试结果表明该装备可以很好地实现管道的喷涂,提高喷涂质量和效率.      

一种开闭式泵试验系统及控制方法

针对泵试验开式系统NPSHr测量精度低、大功率泵闭式系统发热量大的问题,提出了一种开闭式泵试验系统的设计及控制方法,该系统能完成各试验数据的采集、显示、处理、自动调节、校正和打印。通过储水罐的等流量调节,使试验系统更加稳定、可靠,精度也大为提高。     

对某型航空发动机参数的调整分析

分析某型发动机部件对有关性能参数的影响和调整机理,针对因部件效率下降较多引起的性能参数不能同时符合技术要求的问题进行分析,提出适当减小喷管喉部截面面积最小液压限制值来进行调节,使之符合技术要求。