The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

酚醛树脂热解产物高温燃烧详细化学反应机理简化

针对流动/酚醛树脂热解产物燃烧耦合数值模拟过程中使用详细化学反应机理带来的数值刚性问题,以保证计算精度要求,对酚醛树脂热解产物详细化学反应动力学模型进行简化研究。选取Chemkin-Pro中的良搅拌反应模型,对由53种组分325个基元反应组成的甲烷掺氢气详细化学反应动力学机理进行了敏感性分析和生产速率分析,得到包含15种组分15个基元反应的简化机理。结果表明:简化化学动力学模型能充分地再现详细基元反应模型的反应机理的主要特征,大幅缩短计算时间,进而用于高超声速条件下酚醛树脂热解产物引射及其对边界层扰动的计算流体动力学(Computational fluid dynamics,CFD)中。     

带非线性支撑的转子有限元模型求解方法

用数值方法研究了非线性支撑的柔性转子系统的动学行为,提出了一种将有限元与非线性支撑结合的模型和求解方法。利用有限元法(FEM)构建转轴和转盘部分的模型,通过矩阵进行组合;利用离散元方法对包含滚动轴承和挤压油膜阻尼器(SFD)的支撑部分进行建模,此部分包含4个单元,分别为轴承内圈、外圈、SFD内圈和支撑鼠笼。有限元部分和离散元部分通过轴端节点相连,仿真过程中轴端位移传递给非线性支撑部分,支撑部分通过位移计算得到的非线性力反过来作用于有限元转子轴端部分。为了耦合求解有限元转子和非线性支撑组成的数学模型,提出了一种综合的迭代求解方法,克服传统的有限元求解方法对轴端隐性非线性支撑的求解局限性。由于转轴部分采用了Timoshenko梁单元建模,对比与简单转子模型,可以考虑陀螺力矩和轴的柔性特征,更能体现非线性支撑对振动真实影响。在建立的20个轴单元的有限元转子模型中,非线性响应更多体现在靠近非线性支撑的节点1和节点21处,响应频谱中靠近轴端的节点能体现出滚动轴承的2倍和3倍变柔振动频率。     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.     

基于小波变换和支持向量机的开关电流电路故障诊断新方法

针对开关电流(Switched current,SI)电路的故障诊断和定位问题，为进一步提高故障诊断准 确率，提出了基于小波变换和粒子群优化(Particle swarm optimization，PSO)支持向量机 (Support vector machine，SVM)的开关电流电路故障诊断新方法。该方法首先对节点电流 信号进行蒙特卡罗分析，然后通过小波分解计算分形维数，再利用核主元分析（Kernel pri ncipal component analysis，KPCA）降低特征值维数，实现最优故障特征的提取。最后通 过PSO SVM完成对各种故障模式的分类。对六阶切比雪夫低通滤波器进行了仿真实验验证， 获取了较高的故障诊断准确率，与其他方法进行比较，实验结果显示了本文方法的优越性。     

飞机结构初步设计优化中的损伤容限优化方法研究

本文提出并研究了一种在飞机初步设计阶段考虑损伤容限要求优化设计的方法.首先,通过许用应力形式来体现并表征损伤容限设计要求,作为一类新的设计约束,用于初步设计阶段的结构优化设计.然后,通过Global/local分析,在整体优化设计中考虑局部疲劳需求;根据疲劳寿命要求,用裂纹扩展分析程序AFGROW确定了一个新的强度准则...     

带探针装置的倾斜卧式椭直圆筒罐罐容表函数的计算

针对带探针装置的倾斜卧式椭直圆筒罐罐容表函数(即罐内储油量与探针油位高度对应的函数关系)的理论计算问题,首先采用"冰冻"思维和相对运动等效地把倾斜卧式的情形转化为水平卧式的情形,然后根据液面与关键液面的不同位置关系采取了不同的计算方法,最后分段地得到了罐容表函数的一般表达式。     

多层波纹管焊接接头设计与焊接工艺研究

介绍了多层波纹管焊接接头结构形式,分析了多层波纹管的焊接工艺性及工艺难点。采用滚焊+熔焊的焊接工艺,解决了焊接后焊缝气孔缺陷、熔深浅的问题。改进后的批产试验件焊缝一次交检全部达到I级标准,并通过地面单元试验考核。     

TiAl/IN718合金过渡液相连接

采用过渡液相TLP(Transient Liquid Phase)连接技术,以金属Ti,Cu,Ni箔构成复合焊料连接TiAl和IN718合金.研究了保温时间对接头界面结构的影响.实验结果表明:采用Ti-Cu,Ti-Ni复合焊料可以制备无缺陷的接头,但2种焊料形成液相的过程和机理不同.由于在等温凝固过程中,从IN718合金中扩散过来的合金元素可在焊缝区聚集,从而在接头中形成亚层结构.通过对接头焊缝区的组织分析和硬度测试表明,在实验条件下Ti-Ni焊料的等温凝固过程持续时间比Ti-Cu的短.     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.