基于传动误差和齿面印痕控制的弧齿锥齿轮小轮加工参数的设计(英文)

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.     

高温环境对振动测试信号传输参数的影响

为了研究发动机试车运行时高温环境对振动特性测试信号传输参数的影响, 利用电磁场-热耦合理论, 探讨了温度场对电磁场各场量的影响.结合实际测试传输网络, 提出了一种能有效提取多导体传输参数的传输电路法.该方法用经典的能量法进行了验证, 取得了很好的一致性.电阻和电感参数均随环境温度的升高而增加, 且电阻受温度影响的变化幅度尤为明显.多输出响应时多导体的邻近耦合响应随温度升高而加剧, 互电参数受温度和导体间距的影响明显.      

INS/SAR组合导航参数传递建模及精度分析

 对合成孔径雷达景象匹配辅助（INS/SAR）组合导航中地面合成孔径雷达(SAR)匹配点位置参数向飞行器主惯导中心的传递过程进行研究。分析了SAR匹配点位置传递过程中所涉及的各环节及其相互关系,以此为基础建立了测量参数传递过程数学模型,提出适合该模型的误差分析与精度估计方法,结合理论和实验结果对各测量参数误差所造成的传递误差进行分析和比较,得出单一测量参数误差影响程度的排序,并在此基础上得出总精度的估计值。参数传递模型及精度实验结果与实际情况相符,可为组合导航中合理的精度分配提供依据。     

压电层合板振动的鲁棒控制

研究具有不确定系统参数的压电层合板,同时考虑压电层合板的稳态性能和暂态性能,在模型降阶的基础上,应用融合多性能指标的鲁棒控制理论设计控制器,使压电层合板的振动响应满足给定的期望性能指标集,并使压电层合板对参数摄动具有鲁棒性,对扰动输入具有良好的抑制作用.实现压电层合板的鲁棒控制,使振动幅度快速、准确地得到控制.为解决多指标下不确定压电层合板振动的控制问题提供一种代数方法.      

快速构建基于EZ-USB芯片的数据传输管道

通过深入剖析设备数据传输所面临的诸多问题及特点,给出一系列快速构造USB传输管道应遵循的原则,为设备接入主机提供一个简单、经济且可靠的传输方案。其核心是用标准USB总线接口、连接器及USBHUB实现传输的经济可靠;由功能强大的EZ-USB芯片和工具包简化接口电路及代码设计。     

相控馈电双反射面天线辐射特性的研究

研究了用Fourier-Bessel法和射线光学法计算、分析相控阵馈电共焦双抛物面天线辐射场的有效方法,并初步探讨了通过选择天线系统参数来尽可能减少扫描损失的途径。     

光纤彩色三维图像实时全光传感器

对传像光纤的分辨率进行了研究,针对其出现的问题提出解决对策,并介绍了光纤彩色三维图像实时全光传感器的工作原理与实验结果,得出了以中性光子完全代替电子为信息载体的光纤彩色三维图像传感器,具有实时摄取、传递和显现立体彩色目标功能的结论.其抗电磁干扰与自隐身性极佳,在电子战争中或断电紧急时刻将成为机载影像电系统的后备补充.     

嫦娥四号动力下降段图像可视化传输方案

针对嫦娥四号降落相机在动力下降段的图像可视化传输需求和深空通信下行数传信道带宽受限的矛盾,文章提出了一种动力下降段速率自适应的可视化图像传输方案,对如何保证降落相机图像下传的实时性、完整性、速率自适应性等关键问题进行了讨论,并对方案中涉及的抽帧回放算法、帧格式识别方法、合路调度算法等关键技术进行了详细说明。同时,文中给出了该方案在嫦娥四号在轨的验证情况,结果表明,在数传通信速率受限的情况下该方案实现了降落相机图像的存储管理和可视化下传,具有实时性高、速率自适应、图像下传完整等特点,可以为其他航天器数据管理系统设计提供参考。     

火箭多台发动机并联推力传递结构动静耦合计算方法

针对运载火箭多台发动机并联推力传递结构在工作中力学环境适应性问题,开展了动静耦合动力学计算方法研究。该研究分析了动静耦合机理,并以此为基础,计算了有无静载的结构模态频率和推力传递结构关键部位随机振动响应。结果表明,火箭推力传递结构在大推力作用下,结构的刚度发生改变,进而影响动力学特性。相关研究结果为火箭多台发动机并联推力传递结构动静联合试验提供了参考意义。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.