球阀阀座用聚三氟氯乙烯密封环工艺与性能

选用两种不同降温方式探究压制成型工艺对球阀阀座用聚三氟氯乙烯（PCTFE）密封环密封性能的影响。低温试验结果表明,自然降温工艺成型的制品外表面在常温-低温循环工况下出现裂纹,而保压降温得到的制品则不出现上述问题。性能测试与表征分析结果表明,自然降温工艺成型的密封环PCTFE其内部会出现微裂纹等缺陷,导致其在低温测试后出现亚表面裂纹,造成密封失效。降温阶段保压操作可抑制材料成型阶段微裂纹缺陷的产生,避免材料在室温-低温循环工况下因内应力而产生裂纹缺陷。     

减压腔宽度对刷式密封泄漏特性和滞后效应的影响

对减压腔轴向宽度分别为0、04 mm和06 mm的基本型和两种低滞后刷式密封结构进行了静态和动态下压差升降和转子转速升降循环试验,并对其泄漏特性和滞后效应进行了研究。研究结果表明:压差大于02 MPa后,同一压差下的动态泄漏系数比静态降低约14%~20%;低滞后结构的密封性能优于基本型,其泄漏系数最高比基本型降低约20%;静态压差升降循环中,减压腔轴向宽度为06 mm的低滞后结构的滞后效应最强;动态的压差升降循环中,基本型结构的滞后效应最强。转子转速升降循环前后,w为06 mm结构泄漏系数减小约15%,滞后效应最强,减压腔轴向宽度为04 mm结构几乎不存在滞后效应;三种结构中,减压腔轴向宽度为04 mm的结构密封性能最优,滞后效应也最弱。     

空间三轴激光陀螺现状与展望

空间三轴激光陀螺作为激光陀螺技术集成创新的典型代表,已充分展现出优越的综合性能。为全面了解和掌握空间三轴激光陀螺技术发展现状,本文梳理了空间三轴激光陀螺原理与组成、主要特点、关键技术和研究历程,分析了国外主要研究机构、典型产品型谱及应用现状,从中可见空间三轴激光陀螺在国外已经非常成熟和广泛应用。针对国内发展现状和存在的差距,提出了后续发展建议,为我国激光陀螺技术发展及产业化提供了参考。     

基于金属密封垫圈非线性变形仿真的预紧设计

为确保密封结构能有效阻止箱体内部介质的泄漏,要求密封面具备一定的密封比压,即通过施加合理的拧紧力矩来控制密封件的压缩量。目前主要采用试验方法验证一系列拧紧力矩下的密封效果,从而获取临界力矩值并确定可靠的拧紧力矩设计值。文章基于试验经验做出了合理的假设以建立简化的非线性有限元分析模型,对金属垫圈在压紧力下的塑性变形进行仿真,通过金属垫圈发生临界变形量的压紧力反推出拧紧力矩的临界值。该方法获取的临界力矩值与试验方法相近,可以有效地提高设计效率,降低试验成本。     

MDS图在液态模锻工艺过程单片机仿真控制系统中的应用

本文介绍了液态模锻工艺过程单片机仿真控制系统的设计方法，包括液态模锻工艺程确立、逻辑量确立、硬件系统设计、ＭＤＳ图的建立及软件实现，在工艺设备的逻辑性控制中应用ＭＤＳ图控制结构设计的控制器可方便方便地实现ＰＬＣ的控制功能，也可主便地实现其他娄字逻辑系统的控制功能。     

致密金属零件的激光近形制造

介绍了激光近形制造系统的组成,分析了该技术的特点和应用场合,指出了目前存在的问题和解决办法.     

封严篦齿腔内流动及旋涡分布和顶板换热特性的实验研究

自行设计了吸气式篦齿换热风洞并对篦齿腔内部旋涡分布及流场和篦齿顶板换热特性进行了详细的研究。测出了在不同雷诺数和齿隙比篦齿腔中旋涡分布和顶板换热规律。从机理上分析了雷诺数和齿隙比对篦齿腔内流动旋涡分布及顶板表面局部换热规律的影响。     

某型飞机机翼整体油箱工艺研究

介绍了某型机机翼整体油箱的研制过程,针对总体气动、结构和使用维护等对整体油箱提出的性能要求,工程部门相应采用严格的环境措施、确保协调精度的预装配措施以及湿连接、密封装配措施等,解决了研制过程中诸多关键难题,保证了整体油箱的研制进度和产品质量,经各种试验检测和试飞考核,该整体油箱质量稳定可靠,性能良好。     

Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.