涡轮发动机聚氧减重探索

本文在聚氧提高航机部件性能，总体性能的研究基础上，进一步探索航空发动机聚氧减重的规律，提供聚氧缩短压气机、燃烧室、涡轮轴向尺寸、减少发动机直径、减轻上述核心机部件和发动机总重量的理论依据，可供航机预研参考。     

一种模拟喷管二维流场的新方法

采用ＳＩＭＰＬＥ方法对固体火箭发动机喷管进行了纯气相流场的数值模拟。推导了建立在同位网格之上利用协变物理速度分量为计算变量的离散方程，采用协变物理速度分量推导压力修正方程，对密度采用一阶迎风格式插值，将ＳＩＭＰＬＥ方法扩大到计算可压流动。计算结果表明：本方法计算精度高，收敛速度快，程序编写简单。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

二维过渡区喷流干扰流场的DSMC/EPS仿真

应用DSMC／EPS混合算法，数值模拟过渡区有RCS横向喷流干扰的二维有限平板高超声速流场，分析了流场结构、分离形态及物面气动系数分布等特性。结果表明，不同：Knudsen数下，喷流干扰流场存在差异，过渡区中的稀薄气体效应得以体现，证明了DSMC／EPS混合算法是研究稀薄，连续混合区域高超声速流动的有效方法。     

求解可压缩N－S方程的无粘－粘性分数步法

用按物理过程作时间分裂的无粘－粘性分数步法求解可压缩Ｎ－Ｓ方程，无粘步用高效欧拉算法解欧拉方程，粘性步用全隐格式解抛物方程；并采取了有效措施消除由分步法产生的时间和空间不相容性，文中给出了轴对称喷管内外流场的数值模拟结果。     

畸变进气下压气机叶片非定常载荷的数值模拟

为了分析畸变进气在轴流压气机转子叶片表面产生的非定常激振力，采用二维无粘线化非定常流理论，建立了周期性气流条件下叶片表面非定常气动力的计算模型，根据实测的畸变实验数据，对某发动机的第一级叶片表面非定激振力进行了计算分析，结果表明在叶片的不同径向位置，非定常压力的分布规律不完全相似，而作用在叶片表面总的非定常气动力在叶尖部位最强。     

恒压式气体微流量计测量不确定度评估

介绍了恒压式气体微流量计的组成和校准原理.在对电容薄膜规做了热流逸效应实验的基础上,对流量计的测量不确定度进行了评估,给出了扩展不确定度和包含因子.通过传递标准漏孔与德国PTB开展了漏率比对,验证了测量不确定度评估结果的可靠性.     

大瑞利数下二维Benard对流演化过程的DSMC仿真研究

利用DSMC（Direct Simulation Monte Carlo）方法研究了大Rayleigh（瑞利）数条件下稀薄气体的二维Benard对流的特性。考察了流动的非定常演化过程及若干流动特征量随时间的变化特征，得到了与实验较为一致的结论。计算结果表明，当流动控制参数不断增大时，二维Berard对流从热传导状态过渡到热对流状态表现出明显的非定常演化特征。最后当瑞利数增大到一定程度后，注动显示出混沌的特性。     

CIV工艺过程中气体传质模型与计算

在建立碳布叠层体心立方模型、碳布叠层立方模型和纤维束叠层模型典型预制体的宏观孔隙结构几何模型和气体传质数学模型的基础上 ,研究了CVI(chemicalvaporinfiltration)工艺过程中孔隙网络结构对气体比渗透率和材料致密度的影响。结果表明 :孔隙网络的结构与形状是决定反应气体在孔隙中的比渗透率和部件最终致密度的主要因素之一。     

发动机起动过程部件特性的一种改进描述

分析了传统压气机和涡轮特性图在发动机起动过程特别是风车特性研究中存在的困难,给出了改进的部件特性描述方法。对压气机,在特性图上用以出口条件表示的换算转速代替常规的换算转速,用换算扭矩代替效率;对涡轮,在特性图上用换算扭矩代替效率。改进后的部件特性图有效地解决了在低转速区域存在的效率适用性差、数据读取困难等问题。