基于一种新的均匀化实施方法的FRP刚度预测

基于一种新的渐近均匀化(AH)实施方法,预测并讨论了单向纤维增强复合材料(FRP)的宏观等效弹性性能及纤维排列方式对等效力学性能的影响。该方法方便地将有限元分析(FEA)软件作为一个工具箱使用,只需在单胞上施加简单位移周期边界条件开展静力学分析,即可经过简单计算得到等效弹性常数,相比传统均匀化实施方法显著降低了实施难度并简化了计算过程。通过对比不同数值方法的结果验证了该方法的有效性和精确性。数值结果表明:六边形排列下单向纤维增强复合材料呈现横观各向同性,而正方形排列下则呈现宏观正交各向异性,经过刚度平均化过程可得到横观各向异性材料性质,纤维体积含量对两种排列方式下材料等效弹性模量影响显著但有所差别。     

一种修正的Osher通量在高阶WCNS中的特性

将一种基于多维修正的Osher通量运用于高阶加权紧致非线性格式(WCNS)中,该修正通量主要在垂直于激波面的界面上增加耗散,能够改善Osher通量的激波捕捉稳定性,同时对边界层和接触间断的分辨率影响非常小。对修正的Osher通量在高阶WCNS中的特性进行研究,通过数值模拟测试了基于Osher通量的WCNS的激波稳定性、热流预测精度、边界层模拟能力、激波边界层干扰模拟能力,并与Steger-Warming通量和Roe通量进行了对比。结果表明修正后的Osher通量比Harten修正的Roe通量具有更好的激波捕捉鲁棒性,而边界层、驻点热流值和激波边界层干扰的模拟则明显优于Steger-Warming通量。上述结果说明了基于修正的Osher通量的高阶WCNS具有较好的激波捕捉特性、热流预测精度和边界层计算能力。     

飞秒激光能量密度对镍基合金重铸层和加工效率的影响

以航空发动机叶片制孔为导向,结合飞秒激光对单晶镍基高温合金材料的非热熔性损伤阈值(Φth1)和热熔性损伤阈值(Φth2)特征,研究了飞秒激光能量密度(0Φ44.2J/cm2)对制孔重铸层和加工效率的影响规律。研究结果表明:在Φth1ΦΦth2时,镍基合金经飞秒激光加工后加工侧壁没有出现明显的重铸物;在ΦΦth2时,加工侧壁开始出现重铸物,并随着能量密度的增加,重铸层厚度增大。在试验结果的基础上,建立了飞秒激光单脉冲加工深度与能量密度的定量关系。能量密度越高,飞秒激光单脉冲加工深度越大,加工效率越高。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

Diurnal and seasonal variations in long-term changes in the E-layer critical frequency

Long-term changes in the E-layer critical frequency, foE, at three stations of the European region (Juliusruh, Slough and Rome) and also at Moscow and Wakkanai stations are analyzed by the method developed by the authors and described in detail in the previous papers. It is found that Juliusruh and Slough stations demonstrate a well-pronounced change in foE (a trend) during two previous decades. At the same time, the same features of the behavior of the aforementioned trend k(foE) are obtained. The trend is positive and negative in the morning and evening hours, respectively. Similar diurnal behavior of k(foE) is found also for Moscow station but with lower absolute values of the trends. A well-pronounced seasonal behavior of k(foE) is detected at Juliusruh and Slough: the trend is minimal and maximal in the summer period and at the end of fall—beginning of winter, respectively. The maximal amplitude in the morning hours reaches +0.04?MHz per year, whereas the minimal amplitude in evening hours is ?0.06?MHz per year. No systematic changes exceeding by the magnitude 0.01?MHz per year are found for Rome and Wakkanai stations. It is assumed that the observed trends are related to changes (trends) in the meridional wind bringing NO molecules from the auroral oval to lower latitudes.     

扩压叶栅剪敏液晶试验与图像处理

基于剪敏液晶涂层(SSLCC)材料的光学特性,发展了适合于内流场狭小空间环境下的SSLCC边界层流动显示技术:设计并加工了微型摄像头-发光二极管(LED)组合式图像采集设备解决拍摄光路问题;基于二维SSLCC图像与三维模型的空间映射关系,建立了真实模型的三维重构方法;通过SSLCC图像光谱Hue色相值转化,实现了液晶图像信息的定量分析。以西北工业大学高亚声速平面叶栅风洞为平台,开展了某扩压叶栅吸力面边界层流态的剪敏液晶流动显示试验。结果表明:所发展的剪敏液晶显示技术可进行叶栅内流场边界层的流态测量;所建立的图像处理方法可为边界层流动特征的辨识及其特征位置确定提供技术支撑;在来流马赫数为0.12、攻角为0°的条件下,叶片吸力面边界层沿流向依次经历了层流边界层分离、再附着及转捩为湍流状态的过程,且边界层的发展受叶栅角区分离流动影响,造成其前缘分离区减小,再附着点和边界层转捩位置向前缘移动。     

地市级政府规模影响因素的实证研究——以河南省为例

政府规模是我国推进行政体制改革、简政放权进程中值得关注的一个重大课题,文章以＂利维坦假说＂和＂瓦格纳法则＂为理论基础,利用河南省1990~2012年的地市级面板数据,通过构建静态面板数据模型和动态面板数据模型,从一个更微观的视角考察了地方政府规模的影响因素。研究发现,财政分权推动了地方政府规模的扩大,＂利维坦假说＂并不成立;而经济发展水平、城镇化率与地方政府规模也呈正相关关系,即＂瓦格纳法则＂是成立的;此外,我们还发现人口规模、产业结构和开放程度也是影响地方政府规模的重要因素。     

ZL104局部阳极氧化工艺研究

研究了铝合金材料阳极氧化理论以及ZL104铝合金材料局部硫酸阳极氧化处理后膜层粘脱现象产生的原因与机理,指出了该现象产生的原因是氧化膜在贮存、水试等环节受到污染而使氧化膜的封孔结构被破坏.根据理论分析和模拟试验结果,提出了局部阳极氧化前增加水封闭处理对氧化膜进行修复的工艺技术.该项技术可有效杜绝氧化膜层粘脱现象.采用该项工艺技术制造的液体火箭发动机已经用于常规运载火箭系统,该运载火箭已经完成飞行任务考核.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.