Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于装配约束的飞机导管几何特征建模与误差补偿

针对飞机导管实际装配过程中因装配应力大导致故障频发的问题,提出了一种基于导管装配特征的误差补偿方法.首先采用几何建模法进行了导管装配过程的几何建模,并提出了一种基于轴线矢量的导管装配模型建模方法.在此基础上,采用罗德里格旋转公式建立了基于实际装配工况下的导管空间位姿计算模型.然后基于导管装配要求进行了装配约束分析并识别...     

航天员微重力作业训练系统重力补偿控制策略

针对航天员微重力作业训练系统的重力场补偿控制这一关键技术,进行了理论和实验研究。分析了模拟微重力环境的机理,确定了微重力作业训练系统的总体结构方案,提出了一种基于电流反馈的重力补偿控制及多干扰力补偿控制策略。通过虚拟重力补偿控制实验,验证了在地面环境、动态作业过程中,模拟物体在不同空间重力加速度环境下的运动规律,实现了在重力方向模拟空间环境下物体移动的作业训练效果。研究成果为在地面实现三维作业训练系统的控制奠定了基础。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

无控武器对地攻击精度分析

针对目前无控武器对地攻击精度影响因素来源单一,分析影响精度的多种误差源。建立直升机无控武器命中精度分析模型,针对平飞方式下的无控武器命中精度问题,采用蒙特卡洛法多次仿真。针对命中精度与各个误差源的关系方程,提出采用多元线性回归法对仿真结果进行分析,给出误差源对命中精度的影响程度。对关系方程和误差影响程度进行显著性检验,使其更加准确、可信。     

C频段宽带线／圆极化器小型化设计

为适应C频段卫星测控通信车栽天线机动布站功能,须研制一种轴向尺寸小于1．2m的小型化天馈系统,针对该问题,对关键组件线／圆极化器进行小型化设计。在理论分析极化器原理的基础上,采用在聚四氟乙烯基材上打孔的方法使一种介质实现多种相对介电常数,设计了C频段收、发均覆盖575MHz带宽的小型化宽带极化器,在56％相对带宽内实现小型化,轴向尺寸缩短至常规极化器的1／a,经HFSS（HighFrequencySimulationSoftware,高频仿真软件）仿真计算,并与同频段常规极化器性能进行分析比较,结果表明：该极化器移相量与匹配性能良好,满足指标与使用要求。     

激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。     

环型与线型聚能装药射流成型机理对比

环型聚能装药药型罩2侧在挤压汇聚形成射流过程中存在不对称性,不能完全套用线型聚能装药射流成型的现有理论。利用DYNA3D软件对相同剖面结构的环型、线型聚能装药射流成型过程进行数值模拟,通过比较分析得出了环型聚能装药形成杵体及射流参数的分布特性,为进一步理论研究及工程应用提供参考。     

基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

基于PSO算法的半球谐振陀螺惯导系统陀螺温度补偿方法

针对半球谐振陀螺受温度影响出现零位漂移的问题，以测温电路温度为基准，建立温度频率函数实时解算温度，提出一种基于粒子群优化(PSO)算法的半球谐振陀螺惯导系统陀螺温度补偿方法。在求解温度时，需要先将温度频率函数转换为一元三次方程，存在测试计算量大的问题。引入逆向拟合思想，建立频率温度函数，提高陀螺输出温度实时性和降低测试计算量，替代了传统陀螺测温硬件电路，为惯导系统轻小型设计提供新思路。考虑温度变化、温度变化率以及两者的交叉项，建立温度补偿模型，引入PSO算法求解模型系数。温度试验结果表明，在温箱温度为-40~50 ℃内，补偿后的半球谐振陀螺的零偏稳定性较补偿前提升了46％。