Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

采用霍尔传感器的旋翼频率采集设计

为达到对旋翼飞机的控制,需要对旋翼转速进行采集.霍尔转速传感器以其高可靠性等优点常被用来测量转速.介绍了一种使用霍尔传感器进行旋翼转速采集系统,包括硬件构架,逻辑采集单元和软件设计,并给出了优化策略;通过试验数据分析,采集精度达到了预期.     

长板件数控加工技术的探索与研究

结合某型机板件在数控加工中的研制生产状况和存在的问题,论述了实现各种长板件类结构零件装夹定位、刀具及其参数、加工方案及程编策略.通过这些技术措施的实施,在一定程度上解决了在加工长板类零件装夹和定位时出现的零件变形、让刀效率低、质量不稳定等问题.     

ENERGY-SAVING MATCHING STRATEGY AND EXPERIMENTAL STUDY OF PUMPING SYSTEM FOR TRUCK-MOUNTED CONCRETE PUMP

Aiming at the high fuel consumption and use-cost of truck-mounted concrete pump , an energy-saving matching strategy of pumping system is presented and the experimental study is conducted.Since pumping system occupies most resources of engine , the matching strategy between engine and main pump is analyzed to meet the load demand and reduce the engine rational speed drop.The testing method is established to measure the fuel consumption of engine under various working conditions , and the experimental data are analyzed to find the law of the fuel consumption of engine.The system performance can be improved by adjusting the system input value.Finally , the energy-saving matching strategy is established to reduce the fuel consumption of truck for unit workload , which provides a new approach for the energy-saving of truck-mounted concrete pump.     

基于直升机/ 发动机综合模型的变旋翼转速控制研究

为了实现直升机旋翼转速在宽广范围内连续变化且涡轴发动机连续提供输出轴功率,采用1种扭矩序列转移控制方案来实现该传动链。通过2台涡轴发动机和2台多级变速器与旋翼协调工作,发动机依次连接或脱开旋翼,提供旋翼转速大范围内变化,并提供旋翼连续变化的功率。在扭矩转移过程中,针对发动机扭矩强扰动问题设计了鲁棒LMI控制器+ADRC扭矩前馈补偿控制器,最后基于直升机／发动机综合模型进行数值仿真,验证了扭矩转移方案的可行性。仿真结果表明：在转移过程中的扭矩强扰动对发动机动力涡轮转速的影响较小,旋翼转速可以实现较大范围内的快速平滑变化。     

高速风洞模型支撑方式研究

为了合理选择模型支撑形式,在高速风洞进行了直支杆与Z 支杆两种支撑形式的支架干扰研究试验。结果发现,支架对模型带来不可忽略的干扰量,两种支撑形式对升力、阻力与力矩的干扰量随迎角基本上呈线性变化;直支杆由于距离模型较近,对模型尾部带来较大的影响。而Z 支杆对模型尾部影响较小,在全机与无尾两种状态下的干扰量较为相近。     

2m量级高速风洞强迫振动动导数试验技术研究

为满足大型运输机、先进战斗机、推进与机体一体化布局等现代高性能飞行器动导数风洞试验研究的需求,基于小振幅强迫振动动导数试验原理,在中国空气动力研究与发展中心2 m 量级高速风洞(FL-26和 FL-28)建立了一套俯仰、滚转及偏航的三通道动导数试验技术。在试验系统研制过程中,首先采用强度高、刚性好的航空轻质铝材和复合材料解决了亚跨超声速条件下大尺度试验模型研制问题;其次,结合动力学和运动学仿真分析手段,实现并优化了大载荷试验装置传动机构设计以及α、β耦合双转轴支撑结构设计的难题;最后,在测控系统研制部分,通过电机选取、电磁干扰屏蔽、滤波器设计等技术手段进一步提高了测试系统的精度。试验系统设计技术指标Ma=0.4~4.25,迎角α=-35°~35°,侧滑角β=-15°~15°,传动机构法向承载载荷≤10000 N。SDM 标模的验证试验结果表明,直接阻尼导数与文献值一致性较好,重复性试验数据误差基本控制在10%以内。目前,该项试验技术已经成功应用于某大型飞机模型的动导数风洞试验。     

基于非结构网格的不可压N-S方程多矩有限体积法

提出了一种基于三角形及四面体非结构网格的有限体积法(FVM),用以鲁棒且精确地求解不可压粘性流动问题.与传统的FVM方法仅将体积分平均值(VIA)作为计算变量的做法不同,本文提出的方法将VIA及点值(PV)同时作为计算变量并在每个迭代步进行计算更新.VIA以通量形式进行计算以确保数值守恒,PV可以通过控制方程的不同形式进行求解更新,无需守恒,因此可以采用非常高效的方法进行求解.将PV作为增加的变量使得紧致网格模板得以实现更高阶精度的重构,而且由此获得的数值模型对于非结构网格变得更鲁棒.本文针对二维/三维的三角形/四面体非结构网格提出了数值格式,给出了几个基准测试算例,验证了本文提出的数值方法在采用非结构网格求解不可压粘性流动问题时的精确性和鲁棒性.     

基于拟动力学的航空发动机主轴球轴承热弹流润滑分析

以航空发动机主轴球轴承高速高温重载典型工况为算例,基于轴承拟动力学分析,得到滚动体与套圈之间的微接触区运动和受力状态,分别用Hamrock-Dowson(H-D)拟合公式和翟文杰热修正公式计算了最小膜厚(MFT),同时结合热弹流润滑分析得到最小膜厚分布,对比了试验测试、H-D拟合、翟文杰热修正和热弹流润滑分析4种算法的最小膜厚,并根据膜厚比判定了轴承的弹流润滑状态.结果表明:H-D拟合和翟文杰热修正最小膜厚与试验测试结果相差较远,热弹流润滑分析结果与试验数据吻合性较好,误差10%以内;探讨了不同工况下的轴承弹流润滑性能.结果表明:存在径向载荷时,润滑膜整体压力增大,膜厚减小;随着转速增大,压力减小,膜厚增大,但是增大的趋势减缓.      

A new steering approach for VSCMGs with high precision

A new variable speed control moment gyro (VSCMG) steering law is proposed in order to achieve higher torque precision. The dynamics of VSCMGs is established, and two work modes are then designed according to command torque:control momentum gyro (CMG)/reaction wheel (RW) hybrid mode for the large torque case and RW single mode for the small. When working in the CMG/RW hybrid mode, the steering law deals with the gimbal dead-zone nonlinearity through compensation by RW sub-mode. This is in contrast to the conventional CMG singularity avoidance and wheel speed equalization, as well as the proof of definitely hyperbolic singular property of the CMG sub-mode. When working in the RW single mode, the motion of gimbals will be locked. Both the transition from CMG/RW hybrid mode to RW single mode and the reverse are studied. During the transition, wheel speed equalization and singularity avoidance of both the CMG and RW sub-modes are considered. A steering law for the RWs with locked gimbals is presented. It is shown by simulations that the VSCMGs with this new steering law could reach a better torque precision than the normal CMGs in the case of both large and small torques.