基于地外天体起飞的真空羽流导流技术仿真与试验研究

针对着航天器发动机羽流导流问题,基于工程经验提出了四种典型导流装置型面(包含内凹槽形式和导流锥形式等),利用计算流体动力学/直接模拟蒙特卡罗(CFD/DSMC)耦合方法,对起飞过程中羽流导流带来的气动力和气动热效应进行了数值模拟,并对不同导流装置情况下羽流场激波、航天器表面压强和热流密度分布规律进行了分析,给出了四种导流装置的导流效果评价。最后以导流锥形式开展试验,对仿真算法进行了验证。结果表明：羽流导流并没有导致发动机燃烧不稳定;综合考虑航天器羽流和发动机安全性,大导流锥导流的方案最优;在导流锥附近的激波位置及形态和仿真一致,仿真与试验的变化趋势一致,仿真算法可信,数据规律可以作为工程参考。     

国有企业资产重组中职工带资分流的法律研究

如何做好主辅分离，既加强主业企业的竞争优势，又妥善安置好分流职工，是国有企业资产重组中的一个重要课题。采取职工带资分流的方式，是解决这一难题的一个有效途径。鉴于我国目前在此方面的相关立法并不健全，我国应进一步完善相关立法。     

直升机起飞性能试飞方法研究

当直升机可用功率不足以维持地效外悬停时,直升机可以利用地面效应增速至一定前飞速度完成起飞。研究了地面效应和前飞速度对直升机剩余功率的影响,阐述了利用剩余功率进行有地效起飞的原理。介绍了3种有地效起飞方式,并使用水平加速—定速爬升法进行了起飞性能飞行试验,得到了水平越障距离随爬升速度的变化曲线,对飞行试验结果进行了分析,得到了有益的结论。     

纵向波纹隔热屏气膜冷却特性实验

针对加力燃烧室纵向波纹隔热屏气膜冷却效果开展了细致的实验研究,利用红外热像仪测量了隔热屏壁面的温度分布,分析了隔热屏板型、吹风比、开孔率等参数对气膜冷却效率的影响。实验中板型选取了平板和纵向波纹隔热屏,吹风比变化范围是0.5~3.0,开孔率变化范围是1.4%~3.7%。结果表明:相比于平板隔热屏的气膜冷却效率沿程逐渐增加,纵向波纹隔热屏的气膜冷却效率随波纹板的起伏而起伏且大于平板隔热屏;随着吹风比的增加气膜冷却效率逐渐加大,在吹风比为3.0时达到最大值;气膜冷却效率在波峰处低,波谷处高,整体上随波纹板的起伏而波动,吹风比越小,气膜冷却效率随波纹板的起伏变化越明显;高吹风比(吹风比为2.0~3.0)下,气膜冷却效率沿程变化与增幅较为缓慢;整体上,随着开孔率的增加气膜冷却效率逐渐加大,小开孔率(开孔率为1.4%、2.7%)下的气膜冷却效率相差不大,但在次流背风侧,开孔率小的气膜冷却效率要小于开孔率大的气膜冷却效率。      

高速开关阀控电液位置伺服系统自适应鲁棒控制

为研究高精度的液压缸位置跟踪控制问题，设计了高速开关阀和换向阀组合控制液压缸的结构方案，并通过实验分析了高速开关阀的静态流量特性。建立了液压缸的连续可微摩擦模型，利用粒子群优化算法对其参数进行辨识。建立了系统的非线性数学模型，基于非连续参数映射和反步法设计了直接自适应鲁棒控制器，通过参数在线自适应调节来更新估计值和鲁棒反馈项支配参数不确定性，实验结果表明:在跟踪幅值为5mm，频率为0.4Hz的正弦信号时，最后一个周期的最大跟踪误差、平均跟踪误差及其标准差分别为0.638、0.25mm和0.405mm，与传统PID控制器相比，控制精度显著提升，旨在为实现高精度的数字阀控位置伺服技术提供有价值的参考。      

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

叶片飞脱下转子动力学响应实验

为了研究大涵道比涡扇发动机叶片飞脱时动力学响应,更好地进行发动机安全性设计,根据相似理论设计了包含叶片飞脱装置的突加不平衡实验系统并进行了实验验证。研究结果表明:设计的突加不平衡实验系统,与某型验证机相似度高,代表性强,能够有效可控地进行突加不平衡实验,重复性好,机理清晰且飞脱不平衡量大,能够真实地模拟发动机叶片飞脱响应。通过实验发现,当大突加不平衡发生时,频谱出现超次谐波并且冲击系数由于挤压油膜阻尼器限幅作用并不呈现线性关系,因而在后续研究中还应注意限幅导致的碰摩问题。      

凹腔对一体化支板火焰稳定器燃烧性能的影响

在来流温度为780~850℃、来流马赫数为0.16及油气比为0.002~0.006的条件下,试验研究了凹腔对喷油/稳定一体化支板火焰稳定器燃烧效率及熄火性能的影响,并结合数值模拟进行辅助分析。结果表明:在不同油气比条件下,带凹腔的一体化支板火焰稳定器均能实现稳定高效燃烧;不带凹腔的一体化支板火焰稳定器燃烧效率始终低于带凹腔的一体化支板火焰稳定器,随着油气比的增加,两者燃烧效率差距逐渐缩小;带凹腔的一体化支板火焰稳定器较不带凹腔的一体化支板火焰稳定器有更好的熄火性能;凹腔结构促进了燃油雾化与蒸发,从而提高一体化支板火焰稳定器的燃烧性能。      

燃料组分差异对贫油熄火边界的影响

为了推进替代燃料的多元化,扩大航空燃料的组分分布。以标准航空煤油为基准,研究了柴油和高沸点费托油对燃烧室贫油熄火边界的影响。实验采用单头部燃烧室,通过改变燃烧室进出口压力,研究其熄火边界的变化规律,并分析了其与理化性质和组成的关联关系。结果显示在220kPa的出口压力下,航空煤油的熄火性能略优于另外两种燃油,高沸点费托油相比航空煤油熄火边界窄5%,而在140kPa的低压条件下,高沸点费托油的熄火边界相比航空煤油拓宽了8%。分析得到整体上低沸点烷烃和直链烷烃的熄火性能较好。