端壁抽吸对压气机叶栅间隙泄漏流控制策略的研究

为了研究压气机机匣端壁抽吸对间隙泄漏流动控制的可行性和有效性,以高负荷压气机叶栅为研究对象,通过数值模拟方法对不同抽吸位置和抽吸流量率控制参数下的计算工况进行了对比和分析。研究结果表明:端壁抽吸可以直接地影响叶尖泄漏流的结构形态和存在形式,减弱叶尖泄漏流的强度和影响范围,进而提升压气机叶栅的性能;当抽吸槽覆盖范围包含叶尖泄漏流形成位置及稍靠后附近区域时,所对应的抽吸方案具有较好的控制效果,在0°攻角和0.5%的抽吸流量条件下前槽抽吸和中槽抽吸分别可获得7.04%和7.76%的叶栅总压损失增益;并且进一步研究发现端壁抽吸流量率存在上临界值,应针对不同攻角工况,在其相应的临界值范围内选择合理的抽吸流量,以达到用较小的吸气量实现对间隙泄漏流的控制。     

共轴式直升机桨毂阻力特性与减阻试验

共轴式直升机桨毂阻力占全机废阻的50%以上,因此有必要对桨毂阻力特性和减阻设计进行研究。 通过对某共轴式直升机桨毂模型、减阻方案及减阻方案加装涡流发生器进行风洞试验,研究轴式直升机桨毂的 阻力特性,验证减阻方案及减阻方案加装涡流发生器的减阻效果。结果表明:桨毂支臂方位角、转速和攻角变 化对桨毂及其减阻方案的阻力影响很小;上下桨毂整流罩与中间轴整流罩之间的缝隙对阻力影响比较大;减阻 方案可以降低约33%的桨毂阻力,而加装涡流发生器的减阻效果并不明显。     

壳体内腔大深度T型刀加工方案分析

对于外形、内腔结构复杂,零件体积大,材料去除率高等特点的壳体,锻件加工要求所编制的数控程序异常复杂,数据庞大,手工编程难以编制程序。采用UGCAM作为编程手段,利用3维实体辅助编程技术解决此类问题。     

细长杆降低超声速客机气动噪声的数值分析

在超声速客机机头加装适当的细长杆可以降低飞行噪声。本文借助基于AUSM+格式的准三维数值模拟手段对7组13种细长杆方案做了分析比较,总结出了近场气体参数与远场气体参数之间的关系的规律。文章还从气体动力学理论和激波理论出发,对数值模拟结果作了解释,并揭示了细长杆降噪效果与细长杆外形的内在联系,以及近场、远场两者关系的经验公式。文章从各种方案中选取了降噪效果较好的细长杆方案做三维流场分析,并通过流固耦合计算对其结构强度做了校核,验证了方案的可行性。     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.     

Subsidence rate monitoring of Aghajari oil field based on Differential SAR Interferometry

Land subsidence, due to natural or anthropogenic processes, causes significant costs in both economic and structural aspects. That part of subsidence observed most is the result of human activities, which relates to underground exploitation. Since the gradual surface deformation is a consequence of hydrocarbon reservoirs extraction, the process of displacement monitoring is amongst the petroleum industry priorities. Nowadays, Differential SAR Interferometry, in which satellite images are utilized for elevation change detection and analysis – in a millimetre scale, has proved to be a more real-time and cost-effective technology in contrast to the traditional surveying method. In this study, surface displacements in Aghajari oil field, i.e. one of the most industrious Iranian hydrocarbon sites, are being examined using radar observations. As in a number of interferograms, the production wells inspection reveals that surface deformation signals develop likely due to extraction in a period of several months. In other words, different subsidence or uplift rates and deformation styles occur locally depending on the geological conditions and excavation rates in place.     

机载单站只测向定位最优机动研究

概述了机载单站只测向定位最优机动求解算法，研究了基于最大方位角变化率准则下的观测机机动轨迹，得到理论上的最优定位机动，并结合实际运用，分析出两种近似最优的机动：“一”形（直线形）机动和S形机动，通过仿真，验证了这2种机动方式在一定条件下可以等效于最优机动，具有良好的定位效果。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

飞机电气系统参数测试标准实施中问题分析

结合本标准宣贯、研讨会上所提供的信息,分析了飞机电气系统参数测试标准在实际应用中存在的一些问题,并对瞬态电压和频率调制率等重点问题进行了详细的讨论和分析.     

来流马赫数对引射火箭引射量的影响研究

研究引射火箭引射量随来流马赫数的变化关系,对引射量由火箭引射主导向冲压主导之间转换点的选取以及一次火箭的质量管理具有重要意义.采用数值分析和实验研究,探索了引射火箭引射量随来流马赫教的变化关系.结果表明,针对所采用的引射火箭发动机构型,引射量随来流马赫数变化的拐点约为Ma=1.3～1.5,当来流马赫数Ma<1.3时,引射量由火箭引射主导,随来流马赫数的增加,引射量变化较缓慢;当来流马赫数Ma>1.5时,引射量由冲压主导,随来流马赫教的增加,引射量迅速增加.