一种特殊梯度分布的功能梯度矩形板弯曲问题解析解

研究了一种特殊梯度分布功能梯度材料矩形板弯曲问题。假设材料的弹性模量在板厚度方向上呈幂函数分布,泊松比为常数,引入PLEVAKO解,利用分离变量法,导出四边简支功能梯度材料矩形板弯曲问题的解析解。通过算例分析了材料组分变化时,功能梯度板应力和位移的变化规律。结果显示不同梯度分布板结构中的应力、位移的变化规律是不同的,有时甚至差别很大。该方法为发展针对功能梯度材料特点的数值算法和简化理论提供依据。     

作动器输出机构刚度优化设计与仿真分析

作动器输出机构的变形可以看作是输出轴体扭转变形与摇臂变截面悬臂梁变形的综合。从材料力学的角度出发,详细推导了作动器输出机构机械刚度的理论计算方法,并以此理论为依据对作动器输出机构的结构进行优化设计。通过仿真对比确定优化设计的正确性,为工程应用提供了有力的理论支撑。     

周期结构电磁特性在高频真空器件中的应用

作为行波类真空电子器件的核心组件,慢波结构是一种周期结构,其场可以有无限多个模式,每个模式由无穷多个空间谐波构成.每个空间谐波有相应的色散曲线且曲线各段有不同的特性.提出了周期结构色散特性的全维度开发的概念,并以一种可用微电机系统(MEMS)技术加工的折叠波导(FWG)慢波结构为例,对其色散特性进行了分析,利用这些色散特性开展了行波管(TWT)、返波管(BWO)等传统器件的研究工作,同时提出了过模器件、带边振荡器(BO)和谐波放大器(THAT)等新型器件,这些器件的实验研究则以W波段及其以上频率为主,最后给出了突破的关键技术以及测试得到的器件的主要性能.      

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

基于变结构控制减小扫描镜运动对卫星姿态的影响分析

基于解耦变结构控制对静止轨道气象卫星扫描镜运动对卫星姿态的影响进行了研究,根据星上有效载荷的扫描镜与星体耦合特性,设计了一种解耦变结构控制律,控制律直接对4个四元数设计滑动模态方程以避免奇异问题。数学仿真结果表明：该变结构控制率能减小扫描镜运动对卫星姿态的影响,提高卫星平台的稳定度,进而提高有效载荷的成像质量。     

基于大气阻力的卫星编队沿航迹方向的变结构控制

分析了大气阻力对近地轨道卫星轨道参数的影响,用变结构控制设计了基于大气阻力的编队构型沿航迹方向的控制。将中心的漂移距离和编队卫星的面质比之差作为输入量,设计滑模面进行编队控制,用极限环方式消除了在滑膜面附近的频繁切换。仿真结果验证了该控制律的正确性。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

旋转状态柔性附件航天器振动及其变结构控制

基于Hamilton变分原理,采用Mindlin厚板理论,研究了旋转状态中心刚体—悬臂厚板振动及其变结构控制问题。采用Hamilton状态空间法,应用弹性波与振动模态理论,确定了Mindlin厚板中的振动模态。针对该模型系统设计了控制器,采用滑模变结构控制理论,实现了对系统实施渐近稳定控制的设计。采用的变结构控制能使系统达到所期望的振动状态,有效地抑制了平板振动。最后,给出了数值模拟结果,讨论了中心刚体—悬臂厚板位移的动力学控制规律。该方法和计算结果可望能在带有柔性附件航天器的动力学控制中得到应用。     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.