航空发动机压气机内气液非平衡冷却特性研究

针对航空涡轮发动机来流雾化冷却对压气机内气动脉动的影响,考虑壁面液膜成形和运动,基于欧拉-拉格朗日多相流方法解析气液两相热质非平衡传输过程,应用快速傅里叶变换方法将压气机性能参数随旋转周期演变规律的时域脉动敏感性转化为频域功率谱密度的直观分析。结果表明,压气机内气液非平衡蒸发相变易诱发流场在时间和空间上非定常的气动脉动,雾化冷却参数与总温比成线性关系,而与总压比和效率均成非线性关系。在雾化量0.5%~5%和雾化平均粒径1~9 μm范围内,较低的雾化量或较小的雾化平均粒径时,时域总压比的脉动程度更大;在较低的雾化量或较大雾化平均粒径时,时域总温比的脉动程度更强;而在较高的雾化量或较大的雾化平均粒径时,时域效率脉动程度更高。同时,雾化冷却量变化对湿压缩过程中流场的时域脉动敏感性程度大于雾化粒径变化。     

1.5级大子午扩张涡轮非定常流动和传热特性分析

大子午扩张涡轮端壁二次流与热负荷之间的关系,对于端壁冷却非常重要。本文采用几何约化法,对某1.5级大子午扩张涡轮进行数值模拟,研究了大子午扩张涡轮上端壁非定常流动和传热特性。计算结果表明：大子午扩张涡轮上通道涡尺度较大且位置发生改变,沿径向向下移动约20%叶高;R1出口泄漏涡、通道涡和尾迹是造成S2流动和传热非定常性的主要因素;传热与二次流密切相关,对传热研究必须与流动相结合。研究结果将有助于提高对大子午扩张涡轮端壁非定常流动和传热特性的认识。     

High-speed unsteady flows past two-body configurations

This paper presents a detailed investigation of unsteady supersonic flows around a typical two-body configuration, which consists of a capsule and a canopy. The cases with different trailing distances between the capsule and canopy are simulated. The objective of this study is to examine the detailed effects of trailing distance on the flow fields and analyze the flow physics of the different flow modes around the parachute-like two-body model. The computational results show unsteady pulsating flow fields in the small trailing distance cases and are in reasonable agreement with the experimental data. As the trailing distance increases, this unsteady flow mode takes different forms along with the wake/shock and shock/shock interactions, and then gradually fades away and transits to oscillate mode, which is very different from the former. As the trailing distance keeps increasing, only the capsule wake/canopy shock interaction is present in the flow field around the two-body model, which reveals that the unsteady capsule shock/canopy shock interaction is a key mechanism for the pulsation mode.     

Suppressing unsteady motion of shock wave by high-frequency plasma synthetic jet

Three Plasma Synthetic Jet Actuators (PSJA) under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction (SWBLI), a high-speed schlieren image processing method based on spatial Fourier transform as well as snapshot proper orthogonal decomposition were used to study the control effect of high-frequency plasma synthetic jet on low-frequency unsteadiness of SWBLI. The analysis of the base flow shows that the separated shock wave actually has both large- and small-amplitude vibrations at low frequency. And the results revealed that the PSJA with an operating frequency of 2 kHz has the ability to reduce the energy of low-frequency component of shock wave motion, indicating that the 2 kHz actuation can effectively suppress low-frequency unsteadiness of the separated wave. Compared with the actuation frequency of 2 kHz, the energy of low-frequency component of the shock wave is enhanced under the 8 kHz actuation, which aggravates the low-frequency unsteady motion of the shock wave. It is likely that the actuation frequency is too high, thus the intensity of the precursor shock wave induced by PSJA becomes weaker. Additionally, as the 4 kHz actuation is applied, the pulsation of the separation region was enhanced, it is speculated that the actuation frequency is coupled with the oscillation frequency of the separation region.     

火箭低空级间热分离初期流场特性数值模拟

采用耦合求解轴对称非定常NS方程与一维分离动力学方程的方法,对多级火箭低空级间热分离初期过程进行数值仿真。依据仿真结果描述低空级间热分离初期流场的两种典型结构：内部为喷管扩张段流动分离以及外部为级间缝隙横向喷流与超声速外流的干扰流场;给出两种典型流场结构中位于上面级弹体表面（喷管内）的流动分离点位置以及壁面压力分布随仿真时间的变化;初步估算流动分离线偏斜时内外流动分离区域对上面级弹体的干扰力矩。通过分析数值模拟与力矩估算结果,发现在低空级间热分离内外流场中流动分离激波后方形成的高压区域是上面级所受干扰力矩的重要来源。研究结论可为级间热分离过程干扰机理研究提供理论方向,为级间热分离时序设计提供参考。     

侧向喷流干扰流场建立与消退过程数值模拟

针对高超声速轨控侧向喷流的非定常干扰效应问题,应用非定常数值模拟方法和多重网格加速收敛技术,研究了锥-柱-裙外形轨控侧向喷流干扰流场的建立和消退过程,获得了详细的喷流瞬时干扰流场结构特性,分析了法向力放大系数、干扰力矩系数、法向力系数及俯仰力矩系数随时间的变化特性。研究结果表明：在侧向喷流干扰流场建立和消退过程中气动力变化较大,存在峰谷值;法向力放大系数及干扰力矩系数的定常值和非定常时均值之间存在明显差异。     

热沉式超燃冲压发动机非稳态热-结构分析

为了评估热沉式超燃冲压发动机非稳态热-结构特性,初步发展了数值模拟方法。将AHL3D计算的超燃发动机三维内流场结果作为输入条件,然后通过参考焓法得到热环境数据,最后将发动机流道的热环境数据和压载数据输入到热/力响应有限元计算程序。通过对地面试验发动机的非稳态热分析计算结果表明,数值模拟方法适用性较好;沿轨道飞行发动机在发动机点火前机体最大温度可达825 K,喷涂绝热涂层能够降低机体温度;发动机机体的应力和位移随着时间的增加而增大。     

低频压力振荡环境下静止液滴蒸发过程的准稳态模型

为了获得燃料液滴对压力变化得到响应特性,从微观上对压力振荡环境下的液滴蒸发过程进行了分析。结果表明压力振荡会导致流场内部力的不平衡,从而会使液滴周围边界层内气体产生周期性流动,以及液滴周围边界层内蒸气质量分数的振荡,最终会使液滴蒸发速率的产生与压力振荡周期相同的振荡。在此基础上,根据流动边界层理论,提出了饱和蒸气边界层的概念,建立了压力振荡环境下静止液滴蒸发的准稳态模型并进行了数值求解,获得了静止液滴蒸发速率对压力振荡的响应特性。     

多孔毛细陶瓷试棒燃油蒸发与渗透性能的实验研究

研究了多孔毛细陶瓷试棒的燃油渗透、蒸发性能与温度、气孔率及气流速度的关系,并对单直毛细孔的渗透、蒸发及裂解等模型作了分析。     

基于预处理方法的冲压式翼伞非定常气动特性数值研究

开展绕冲压式翼伞内外一体化流场的二维、不可压、非定常数值模拟。采用预处理的双时间步长方法 ,研究了冲压式翼伞在有攻角飞行时阻力、升力的瞬态特性和非定常旋涡脱落对翼伞气动力的影响问题。气动力特性的计算值与实验结果吻合较好 ,并观察到升力和阻力在大攻角飞行中的周期性变化规律。同时流场的瞬态特性证实上翼面旋涡的发展与运动是导致翼伞气动力脉动的主要原因。计算发现在前缘切口的冲压作用下 ,翼伞内部的压力较高 ,气流几乎保持滞止 ,这是维持翼伞充气外形的主要原因。