Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

尾迹对低压涡轮端区非定常流动影响的数值研究

为提高尾迹对涡轮端区二次流影响的认识,利用尾迹降低端区损失,采用了数值模拟的方法对T106A非定常工况下的叶栅流动进行模拟,辅以实验进行校核。以上游尾迹对端区附面层的抬升作用和上游尾迹对叶栅通道前部涡系结构的破坏作用为切入点,分析尾迹对端区二次流非定常发展过程的影响。研究发现尾迹中心离开叶栅通道时,尾迹对叶栅端区二次流起抑制作用;当尾迹尾部离开叶栅通道时,尾迹卷起的轮毂附面层激励了端区二次流,使二次流更加活跃。     

Effects of wing locations on wing rock induced by forebody vortices

Previous studies have shown that asymmetric vortex wakes over slender bodies exhibit a multi-vortex structure with an alternate arrangement along a body axis at high angle of attack. In this investigation, the effects of wing locations along a body axis on wing rock induced by forebody vortices was studied experimentally at a subcritical Reynolds number based on a body diameter. An artificial perturbation was added onto the nose tip to fix the orientations of forebody vortices. Par-ticle image velocimetry was used to identify flow patterns of forebody vortices in static situations, and time histories of wing rock were obtained using a free-to-roll rig. The results show that the wing locations can affect significantly the motion patterns of wing rock owing to the variation of multi-vortex patterns of forebody vortices. As the wing locations make the forebody vortices a two-vortex pattern, the wing body exhibits regularly divergence and fixed-point motion with azimuthal varia-tions of the tip perturbation. If a three-vortex pattern exists over the wing, however, the wing-rock patterns depend on the impact of the highest vortex and newborn vortex. As the three vortices together influence the wing flow, wing-rock patterns exhibit regularly fixed-points and limit-cycled oscillations. With the wing moving backwards, the newborn vortex becomes stronger, and wing-rock patterns become fixed-points, chaotic oscillations, and limit-cycled oscillations. With fur-ther backward movement of wings, the vortices are far away from the upper surface of wings, and the motions exhibit divergence, limit-cycled oscillations and fixed-points. For the rearmost location of the wing, the wing body exhibits stochastic oscillations and fixed-points.     

基于Volterra级数的非线性非定常气动力降阶模型

发展了一种基于Volterra级数的非线性非定常气动力降阶模型。着重探讨了基于CFD／CSD耦合计算的Volterra核辨识方法。CFD／CSD耦合计算采用了一种简单的动网格快速生成方法，气动网格与结构网格节点间的物理信息交换采用一种改进的CVT方法。通过与CFD／CSD直接计算的结果对比，表明非定常气动力Volterra级数模型是一种效率高、精度好、能描述非线性、便于使用的降阶模型，特别适用于预测结构做非定常运动下的非定常气动力。     

出口静子安装角对压气机/吊架干涉的影响

针对调整出口导流叶片来减小吊架对压气机流场影响的方法,采用非定常数值模拟和实验方法,对分离式和一体化式吊架进行了研究。分离式吊架情况下,对减小扰动的作用不明显;一体化式吊架情况下,通过适当调整出口导流叶片安装角可以有效地降低转子后的压力扰动,改善流场。该优化方法适合于一体化式吊架。     

超音速气流中横喷氢气自动着火与燃烧非定常过程的实验研究

进行了Ｍ＝２超音速流中横喷氢的自动着火及燃烧非定常过程实验研究，用高速纹影摄影、壁面动态和静态压力测量仪及壁温热电偶等进行了测量。得到了喷嘴后回流区壁压随时间的变化规律，以及壁压和壁面秒温升沿轴线的变化趋势。获得了来流空气总温和喷氢量对自动着火过程的影响。     

离心泵的瞬变过程性能研究

本文介绍了离心泵在纯液相流瞬变工况的性能研究的一些进展.特别注意了泵在气-液两相流瞬变工况的机理分析.介绍了航天部31所对于冲压发动机供油系统涡轮泵流体瞬变过程的研究成果.研究表明,离心泵的瞬变性能是其重要的特性之一;不能离开泵所在系统来讨论其瞬变性能;在非定常流中,区分“瞬变过程”与“缓变过程”,有十分重要的理论与实践意义.     

Solving a radiation problem with forward speed using a lifting surface method with a Green''s function

The progress of seakeeping computations requires development of computating codes for unsteady flows around a ship or its elements. In this paper, we present a method of calculation concerning waves radiated by an oscillating surface-piercing flat plate with forward speed, with a yaw angle. By use of Green's third identity, the problem is transformed into the resolution of a Fredholm integral equation of the first kind by a panel method using Green's function. The Green's diffraction-radiation function with forward speed is used. Its numerical values are calculated by an adaptative integration procedure to reduce the computation time. The present method permits determination of the pressure jump distribution across the plate, the total forces and moments. The results obtained are compared with other numerical methods in hydrodynamics and in aerodynamics, and with experimental data obtained in a water tank.     

二维涡轮级的定常/非定常数值模拟

为了解定常与非定常计算差别对工程应用参考价值的影响，本文通过求争二维Navier-Stokes方程，针对一级涡轮叶栅分别进行了定常／非常数值模拟。结果发现，对于叶片表面压力分布，第一排导叶定常计算与非定常计算得到一致的结果，但是在动叶上差别较大，尤其在叶排小间距时。当叶排间距拉大后，定常计算结果趋近于非定常计算结果时间平均值。