飞机数字化装配系统中机身交点孔加工方法研究

针对传统交点孔加工方法加工精度低且存在回弹变形的问题,设计了一种满足飞机大部件数字化装配要求的机身交点孔精加工方法,根据交点孔的加工特性完成了机身定位与固持、数控加工中心定位以及加工工艺的总体设计,确定了交点孔加工程序原点的计算方法和编程原则,最后通过交点孔试切加工试验验证了加工方法的可行性。     

中红外激光在光电对抗领域的应用及进展

近年来为有效对抗先进的红外制导武器的威胁，先进的红外对抗手段和方式不断推陈出新。其中利用中红外激光辐射致盲、致炫和毁伤的手段可以有效地对抗红外制导武器的威胁。为此本文重点介绍了中红外激光在光电对抗领域的应用；然后，对中红外激光光源和分类及其原理进行了阐述，并介绍了美国和俄罗斯在中红外光电对抗的系统领域的发展现状；最后，对中红外（3-5μm）光电对抗的应用发展和未来的趋势进行了总结，并对化学、气体和固体中红外激光光源的应用进行了展望。     

基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分，产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料，归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准，将大幅提高测量准确度和稳定性，结合量子效应的微加工技术实现芯片尺度的测量等，微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

低温磨料气射流加工PDMS实验研究

通过自研的低温磨料气射流加工装置进行低温磨料气射流加工聚二甲基硅氧烷(polydimethylsiloxane,PDMS)实验研究,分析了加工时间、加工距离、冲蚀角度和磨料粒径对冲蚀率、孔深和孔横截面形貌的影响。结果表明:随着加工时间的增加,冲蚀率先增大后减小,在第1阶段加工过程中,孔深与加工时间大致呈线性关系,增加加工时间还可使孔底部变平整;存在一个最佳加工距离使孔深最大,当加工距离大于最大加工距离时,孔深将随着加工距离的增加而急剧下降,孔的锥度随着加工距离的增大而增大;当冲蚀角度处于30°～60°之间时,冲蚀率最大,随着冲蚀角度的增加,孔的形状逐步由椭圆形变成圆形;存在一个最佳磨料粒径,使冲蚀率和孔深达到最大;当冲蚀角度小于90°时,低温磨料气射流加工PDMS材料去除机理为塑性去除和脆性去除的结合。     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

精密导电滑环表面微槽车削性能

采用超精密车削精密导电滑环导电环的方法,保证了精密导电滑环绝缘环与导电环的同轴度、环间距,使绝缘微槽变形量低于0.10 mm。建立了精密导电滑环的切槽模型,利用仿真分析讨论了主轴转速、进给速率、刀具前角和切削深度对微槽变形量的影响,并对模型进行了试验验证。结果表明:滑环微槽侧面变形量随主轴转速的增大而变大,当转速达到700 r/min时,变形量达到了0.10 mm,超出了滑环的精度要求;滑环微槽变形量随机床进给速率的增大而变大,当进给速率达到1.5 mm/min时,变形量超出了滑环的精度要求;滑环微槽变形量随着前角的增大而减小;滑环微槽变形量随切削深度的增大而变大,切削深度低于0.2 mm时,滑环变形量微乎其微。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

提高某铝合金薄壁深孔零件加工质量研究

通过分析某铝合金薄壁深孔零件在加工过程中存在的问题基础上,采用了拉镗拉铰加工内孔,再以轴向定位夹紧的方式加工外形的思路,该方法保证了零件加工精度,解决了该铝合金薄壁深孔零件的加工问题,完全满足生产实际需要,质量稳定可靠,可为类似零件加工提供参考。     

S试件几何形状定义与特性分析

S试件是用于综合检测五轴数控铣床动态加工精度的检测试件,目前已申请纳入国际标准ISO 10791-7标准组作为附加测试件。S试件的型面由两个直纹面构成,但S试件草案中并未对S形直纹面的参数化方式进行详细指定,因而导致S试件的几何形状表达方式不唯一,不同的型面几何定义对试件的检测特性有重要影响。针对以上问题,本文给出了Nurbs参数和等弧长两种典型的S试件直纹面定义方法,对比分析了两种直纹面的扭曲角变化及侧铣原理性误差等特性,并根据分析结果选取Nurbs参数作为S试件直纹面定义方式,从原理上完善了S试件的几何定义,有利于S试件标准的推广。     

先进航发旋转雾化喷嘴制造技术

喷射油道是一种高精度旋转雾化喷嘴,其非连续窄深端槽、窄深槽、3/4圆弧窄端槽为行业内少见结构.通过分析喷射油道特有结构的加工工艺,摸索油孔尺寸与燃油流量的匹配关系,解决了非连续深窄端槽、窄深槽、细微孔电火花成形加工、3/4圆弧窄端槽高效数控加工、高精度喷嘴孔流量调试等关键技术瓶颈,具有一定的指导意义和广阔的应用前景.