计算气动光学研究进展

计算气动光学是采用数值计算的方法研究高速空气动力流场对光波传输和光学成像影响的一门交叉学科,在红外成像制导设计等工程应用中发挥着重要的作用。总结了计算气动光学研究的三种基本计算方法,包括基于CFD简化方法的光学统计估算、基于RANS流场的计算和基于LES/DNS瞬态流场的计算,对这三种计算方法的基本理论、计算过程进行了介绍,综述了新近的一些计算气动光学研究进展,最后指出了未来的研究重点和方向。     

Investigation on the interface damage in drilling low-stiffness CFRP/Ti stacks

Carbon fiber reinforced plastic and titanium alloy (CFRP/Ti) stacks have been widely used as aerospace structures because of their excellent combination of physical properties. Interface damage caused by interface gaps, significantly different from that of metal/metal stacks, is a common problem in the through-hole drilling of CFRP/Ti stacks with low stiffness. In this study, a force–deformation coupling model was developed to further examine the formation mechanism and the control method of interface damage. Firstly, the coupling model was built considering the interaction between the thrust force and the deformation. To solve this model, a numerical method was proposed in which specific cutting coefficients were calibrated using only the thrust force of rigid stacks. Secondly, drilling experiments were performed with different feed rates and bending stiffness. Experimental results indicate that interface damage mainly includes interlayer chips and surface damage of CFRP layers. The surface damage, which is irreparable, is caused by the rotary extension of metal chips along the interlayer gap. Thirdly, variations of the interface gap were calculated with the coupling model that had been verified by measured thrust forces. The damage area was found to have a linear dependence relation with the interlayer gap. However, in conditions of large gap sizes, the interface damage areas increased with the interlayer gap at high feed rates, while decreasing slightly at low feed rates. This phenomenon was satisfactorily explained by the presented model. Finally, a method was proposed to determine the appropriate pressure exceeding which no interlayer damage will occur. Additional drilling experiments proved the method effective. This study leads to further understanding of the forming mechanism of interlayer damage and of selecting appropriate parameters in drilling low-stiffness composite/metal stacks.     

应用SU（1,1）相空间的P表示讨论光场的非经典性质

提出应用ＳＵ（１，１）相空间的Ｐ表示讨论光场非经典性质的方法。在以ＳＵ（１，１）相干态为一组超完备集的一个广义相空间里建立光场密度算符的Ｐ表示；由密度算符的Ｌｉｏｕｖｉｌｌｅ方程推得准概率分布函数Ｐ（ζ）满足的Ｆｏｋｋｅｒ－Ｐｌａｎｃｋ型方程；应用Ｐ（ζ）可以把一个量子系统算符的量子统计平均值表示为在广义相空间中具有一定概率分布的经典统计平均值，从而用它来讨论光场的压缩、振幅平方压缩以及反聚束效应     

PROBLEMS OF WINDBLAST

ＰＲＯＢＬＥＭＳＯＦＷＩＮＤＢＬＡＳＴＺｈａｎｇＹｕｎｒａｎ；ＷｕＧｕｉｒｏｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＳｐａｃｅＭｅｄｉｃｏ－Ｅｎｇｉｎｅｅｒｉｎｇ，Ｂｅｉｊｉｎｇ，Ｃｈｉｎａ，１０００９４）ＰＲＯＢＬＥＭＳＯＦＷＩＮＤＢＬＡＳＴ￥ＺｈａｎｇＹｕｎ...     

中央电视塔塔楼风作用风洞模拟实验

应用风洞实验方法,研究了中央电视塔塔楼表面风荷载与塔楼进排风口的风环境,后者考虑了进排风的模拟并且做了为改善进排风口的风环境对局部结构进行变动的实验研究。实验结果提供了塔楼表面的平均和脉动风压系数分布以及进排风的风环境特性,并对局部结构的改进提出了建议。     

Latitude and solar-cycle dependence of radial IMF intensity

I describe a simple procedure for extrapolating the observed solar magnetic field into the heliosphere, which averages the asymptotic fields computed using the standard source surface and current sheet models. The resultant field is characterized by strong latitudinal gradients (maintained by volume currents outside the source surface) and by abrupt reversals in direction at the current sheets. The model yields good agreement with the observed long-term variation of the radial IMF component in the ecliptic, and is used to predict the variation of |B _r | along the latitudinal trajectory of Ulysses during 1990–1994. As found in earlier studies, the magnitude ofB _r at any latitude is determined largely by the strength and relative orientation of the Sun's dipole moment.     

大型运输机动力增升喷流效应数值模拟

参照C-17运输机发动机安装位置,考虑内、外涵道分开排气,建立了外吹式襟翼动力增升全机几何分析模型以及相应的巡航构型.采用结构化多块网格技术,基于雷诺平均Navier-Stokes方法,分别对全机增升构型和单独发动机动力喷流进行数值模拟验证,在此基础上对外吹式襟翼动力喷流效应展开研究.对于低速动力增升构型,发动机喷流大部分直接冲刷襟翼下表面而后向下偏转,部分高速气流经襟翼缝道引射并加速后吹向襟翼上表面,两部分气流在襟翼后缘汇合并向下游延伸,喷流冲刷襟翼时存在明显展向横流特征.在动力喷流影响下,不仅襟翼环量大幅增加,缝翼和主翼上的环量也均有所增加,全机可用升力系数和最大升力系数均突破了机械式增升装置的极限,达到4.0以上.同时,全机低头力矩大幅增加,为纵向配平带来额外的压力.对于相应的高速巡航构型,发动机喷流主要影响机翼下表面的压力分布,使得全机升力减小,阻力明显增大.动力增升构型在基本翼设计过程中应充分考虑喷流的影响.      

基于PID控制的主动磁轴承-飞轮转子系统运动稳定性研究

磁悬浮支承应用于控制力矩陀螺具有很多优点,但是飞轮转子在高转速下表现出的陀螺效应是影响系统稳定性的主要因素。现研究了由于陀螺效应产生的章动和进动造成系统失稳的根本原因,并对控制系统提出改进方案。为研究方便,提出了相位分析的方法进行PID控制系统分析。研究结果表明,章动失稳的主要原因是系统的相位滞后引起,进动失稳主要因为积分控制项对系统负阻尼作用引起,同时,研究表明积分控制对系统章动稳定性影响很小。     

玻璃纤维复合材料的原子氧剥蚀效应试验研究

对两种玻璃纤维复合材料开展了原子氧效应的地面模拟试验研究。总结了试验前后试样质量及表面形貌的变化规律，计算得到了材料的剥蚀率。试验结果表明，随着原子氧累积通量的增大，玻璃纤维复合材料的质量和体积损失减慢。经分析认为，在原子氧与复合材料的作用过程中，树脂优先被剥蚀，而将纤维暴露在外，由于玻璃纤维对底层树脂基体的遮挡作用，导致在原子氧效应试验后期，玻璃纤维复合材料的剥蚀速度减缓。     

商用微电子技术在卫星辐射环境中的应用

汇总了商用器件的辐射效应,讨论了这些器件的辐射敏感度,讨论了对其危害的评估方法和必要时的回避技术,以帮助设计师和项目管理人员在空间辐射环境中用好这些商用器件。