防风网对煤堆遮风效果的风洞实验研究

为了考察防风网对堆场煤堆的遮风效果,进行了防风网与煤堆之间区域的流场可视化实验。使用风洞模拟大气边界层条件,并将开孔率为38.5%的防风网模型布置在煤堆模型前方。实验中采用粒子成像测速(PIV)系统测量了防风网和堆场区域的平均风速分布,并且获得了煤堆表面的摩擦风速分布,进一步估算煤堆起尘量的变化情况。实验发现,防风网可有效降低煤堆表面迎风区域的摩擦风速,而对背风面的流场分布影响较小。研究结果可为防风网的遮护作用提供一定的实验支持。     

某型航空活塞发动机曲轴喷油螺钉的维修工艺研究

喷油螺钉是某型航空活塞式发动机曲轴组合中的重要零件，单纯采用超声波清洗难以清除该零件内部积炭。结合生产实践对工艺进行改良，使该零件修理后的抽检合格率由20%提升至70%，缩短了发动机的翻修时间，节约了维修成本。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

汉乐府《陌上桑》罗敷形象再解读

《陌上桑》是一篇被世人广为传诵的汉乐府佳作,作品塑造一个鲜活的充满生命活力的女子形象———罗敷,她美丽、健康、自信、阳光、勇敢、自尊,一改传统诗文中女性的哀怨、病弱、卑怯、凄苦之态,成为文学史中一个光彩照人的独特形象,具有特殊的意义。     

热处理对激光直接沉积成形A-100钢基体组织及性能的影响

研究了激光直接沉积成形A-100钢沉积态及热处理态组织,通过调整热处理工艺获得激光直接沉积成形A-100钢回火马氏体+回火贝氏体混合基体组织。不同热处理工艺下性能对比结果表明,相比淬火马氏体组织,回火贝氏体+回火马氏体混合组织具有更高的强度,但塑性有所下降。     

基于SP-ABC算法的数控铣削参数优化

针对铣削加工中成本最低的优化问题,采用一种改进的人工蜂群(SP-ABC)算法对铣削参数进行优化.在基本ABC算法的基础上,嵌入粒子群(PSO)算法,以提高算法的局部寻优能力.此外,不同于传统的单工序优化,建立的优化目标模型,在考虑实际生产过程中的各种约束条件下,可同时对粗、精两个阶段多道工序同步进行优化.计算机仿真结果表明,相较其他的基本算法,该算法能够找到更优的铣削参数组合,从而实现铣削加工过程的成本最低化.     

水下超声速射流对上浮水雷受力特性影响研究

固体火箭发动机具有功率密度大、推力大等优势,常被用于上浮水雷的推进器。然而发动机在水下工作时燃气射流使流场压力发生剧烈脉动,进而影响发动机的推力性能及上浮水雷的受力特性。基于VOF多相流模型和理想气体模型,建立了上浮水雷在不同工作状态(欠膨胀、完全膨胀、过膨胀)下的数值模型,研究了水下燃气喷射流对上浮水雷的受力特性影响。结果显示,欠膨胀工况时,发动机推力平缓,大小为12.2KN,上浮水雷受力未出现负值;完全膨胀时,射流发生颈缩、胀鼓现象位置距离雷体较远,导致发动机推力及水雷壳体受力振荡不剧烈;过膨胀工况时,射流发生颈缩、胀鼓现象距离喷管较近,发动机推力发生剧烈脉动,产生21.37%的振荡幅度,胀鼓现象发生时,流场压力显著降低使得上浮水雷后体受力减小,壳体阻力增大,上浮水雷最大产生27KN的负推力。     

CVD技术制备Ta/W层状复合材料

运用化学气相沉积(Chemical Vapor Deposition,CVD)技术制备了W体积分数分别10%,13%和18%的Ta/W两层层状复合材料,采用金相显微镜(OM)、扫描电镜(SEM)和室温拉伸实验对复合材料的性能进行分析。结果表明:运用CVD技术可以制备W体积分数不同,且密度优于理论密度99.4%的层状复合材料;复合材料中Ta,W层的晶粒均为柱状晶粒,离界面越近,晶粒越细;沉积态复合材料的力学性能优于纯CVD Ta和CVD W;1600℃×2 h的热处理后,复合材料的界面扩散层宽度显著增大,力学性能高于沉积态的力学性能,最高抗拉强度可达660 MPa。     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

《诗经》中女性生命价值的解读

中国的伦理文化中,对母性的塑造一方面是对"女色"的危害进行严惩,另一方面是对女性进行引导,使她们能够按照指定的方向行进,最终使所有的女性都安于贤妻良母的价值规范。透过《诗经》及后世对《诗经》的解读即可看出男性对女性的价值期待。