管状三维四向织物编织密度均匀性分析

管状三维四向织物因形状的变化和不同截面编织时增减编织纱的不连续织物编织密度存在不均。本文分析了常用管状产品编织密度的主烨形和最大,最小密度位置,可为管状三上向织物的质量控制提供依据。     

航空发动机轴承腔热状态分析模型及温度场计算

分析了轴承腔的主要热源。建立了轴承及石墨密封摩擦热的计算模型、密封热泄漏量的计算模型、对流换热系数的计算模型及温度场的计算模型。用热网络法建立了轴承腔的热平衡方程组,并采用拟牛顿法求解了该方程组。获得了10种不同工况下的温度场计算结果,该结果与本文的测试结果基本吻合。      

某直升机齿轮传动系统的瞬态热分析

提出了传动系统瞬态温度场的分析方法,建立了失去润滑条件下传动系统功率损失及对流换热系数的计算模型,该模型考虑了失去润滑后传动系统热状态参数的时变特征。在稳态热分析的基础上,求解了某直升机齿轮传动系统的瞬态温度场,为该传动系统生存能力的预测提供了理论依据。      

基于双因素方差分析的混响室搅拌器优化研究

针对混响室搅拌器的优化问题,建立了混响室仿真模型,分析了搅拌器叶片不同夹角和不同边长比对混响室场均匀性的影响,得到了叶片较优夹角和较优边长比。通过对仿真数据进行双因素方差分析,得到搅拌器叶片夹角和边长比对场均匀性影响的权重关系。该结论为混响室搅拌器的优化设计提供了指导依据。     

基于有限单元热网络法的航空发动机主轴轴承热分析

航空发动机主轴轴承温度场的精准预测对保证发动机润滑系统及整机稳定运转至关重要。针对传统热网络法精度低的问题,提出一种基于有限单元思想的有限单元热网络法。将轴承结构通过网格划分为有限个单元体,每个单元体设置一个温度节点代表该单元体的集总参数,节点间构建热阻关系并形成热网络,通过求解以温度为未知量的大型稀疏矩阵线性方程组来获得滚子轴承横截面的温度分布。该方法可以与轴承局部产热理论相结合,实现轴承局部产热的精准加载,完成温度场的精细化分析。通过与试验结果对比,本文方法对轴承外环表面中心线温度的预测结果与试验结果误差不超过13%。     

大面积覆铜多层印制板通孔焊接温度场仿真

为了提高型号产品中连接大面积覆铜的通孔元器件焊点的过锡率,进而提高焊点的可靠性,本文建立了四层大面积覆铜通孔焊焊接三维模型,研究添加温度补偿后的四层覆铜的印制板通孔焊接过程中的温度场分布,得出焊接温度对过锡率的影响规律。发现焊接温度350 ℃时通孔过锡量达到100%,这与实际焊接所有焊点过锡量均达到100%的结果一致。有限元温度仿真结果与热电偶测温结果吻合较好,表明该模型可以准确地模拟焊接过程中温度演化,可为大面积覆铜通孔焊点的手工焊接过程和焊接参数优化提供理论指导。     

Dependence on forming parameters of an integral panel during the electromagnetic incremental forming process

Nowadays, more and more attentions are paid to electromagnetic incremental forming(EMIF), especially for a part with a large-scale size, e.g., an integral panel with stiffened ribs. In this work, the bending of a panel into a double-curvature profile via EMIF is carried out experimentally and evaluated by comparing the formed profile with the desired profile. During the process,discharges at four positions along different discharge paths are designed. The effects of forming parameters on the die-fittingness of the workpiece are discussed, for which two evaluation indices are used to judge forming results. The results show that a discharge voltage in an incremental mode is helpful to improve the fittingness and avoid the collision rebound against the die at the same time.Discharging at the diagonal positions with the ‘‘X" discharge path exhibits the minimal shape deviation and the best forming uniformity. On the contrary, discharging at the parallel positions with the ‘‘Z" discharge path obtains the worst forming quality. Overlap of the coil at different positions should be given during EMIF; however, a lower overlap rate of the coil helps improve the forming quality. The results obtained in this work are useful for forming integral panels with stiffened ribs via the EMIF process.     

光纤陀螺惯导在航海领域的发展与应用

针对航海导航领域对惯性技术发展的新需求,从系统精度、旋转调制技术、陀螺性能等方面出发,梳理了国外航海惯导技术的发展脉络。由此总结出了航海惯导三点新的发展需求,包括定位精度、研制成本、使用维护性,同时给出了满足当前发展需求的一个研究方向,那就是采用超高精度的光纤陀螺研制航海惯导。最后从陀螺精度极限、温控、全阻尼等几个方面进行简要的可行性论证,并给出了部分验证试验结果,试验结果表明光纤陀螺惯导在航海领域具有广阔的发展前景。     

基于中波红外热成像的温度场测量技术研究

随着红外探测技术的不断发展,基于中波红外热成像的测温技术得到了越来越广泛的应用。在研究中波红外成像系统测温原理的基础上,探讨了黑体辐射定标技术,以及环境辐射和定标数据处理方法对测温准确度的影响,提出了一系列的处理方法,实现了一套基于红外成像的温度场测量方案,并有效补偿了环境辐射对测量结果的影响,同时降低了定标数据拟合引起的误差,使测温准确度得到了很好保证。     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.