双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

磨削表面粗糙度在线实时测量的研究

在试验研究的基础上,研制了一种新的光纤表面粗糙度在线测量系统。以光散射法为理论基础,用光纤束作为传感器,并用单片机进行数据处理和实时显示。针对外圆磨削在线检测中存在的冷却液、工件尺寸变化、环境干扰以及仪器的装夹与对中等问题进行了研究,找到了改进或解决的办法,从而更利于该测试技术的实施与推广。     

工件表面轮廓均方根斜率的光散射测量

描述并确定具有明显纹理粗糙表面均方根斜率的光散射技术(均方根斜率是联合表面轮廓高度和波长特性的混合参数)。称为散射光锥法(The scattered light-conemethod)的该技术是基于激光角散射检测阵列(DALLAS——Defector Array for Laser LishtAngular Scattering),它用于测量粗糙表面散射光角分布的仪器。均方根斜率是从DALLAS光散射图象的角宽得到的。一般可以发现角宽(即估计的均方根斜率)对光的入射角和散射角变化相当大时是不敏感的。这些结果与表面材料无关,并且对正弦和随机粗糙表面都是有效的。介绍了散射光锥法的测量原理、实验、数据分析和几点结论。     

Effects of Mach numbers on Magnus induced surface pressure

Experimental and numerical methods were used to investigate the Magnus phenomena over a spinning projectile. The pressure force acting on the surface of a spinning projectile was measured for various cases by employing a relatively novel experimental technique. A set of miniature pressure sensors along with a data acquisition board, battery and storage memory were placed inside a spinning model and the surface pressure were obtained through a remotely controlled system. Circumferential pressures of the model for both rotational and static conditions were obtained at two different free stream Mach numbers of 0.4 and 0.8 and at different angles of attack. The results showed the ability of this new test method to measure the very small Magnus force via surface pressures over the projectile. The results provide a deep insight into the flow structure and illustrate changes in the cross-flow separation locations as a result of rotation. Similar results were obtained by the numerical simulations and were compared with the experimental data.     

Wilkinson定理扰动界的改进估计

Wilkinson定理是代数特征值问题中的一个经典定理,文章给出了Wilkinson定理的结果中关于扰动矩阵上界的另一种估计形式,并指出该形式对Wilkinson定理具有一定的改进。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

动力失效对起飞纵向气动特性影响数值研究

研究民用飞机动力失效对飞机起飞阶段纵向气动特性的影响规律及其机理,对保证飞机有效操纵和安全飞行具有重要意义.采用在点对点多块结构化网格系统上求解三维可压缩雷诺平均N-S方程的数值方法,研究发动机动力失效对某民用飞机起飞构型纵向气动特性的影响.通过DLR-F11模型验证研究方法对民用飞机高升力构型气动特性的预测能力;针对安装动力短舱的某翼吊涡扇发动机民用飞机起飞构型,通过对比其发动机在正常工况和失效时飞机气动特性的差异,得出动力失效对飞机纵向气动特性的影响规律及机理.结果表明:动力失效后,不但溢流效应会使飞机阻力系数增大;还会导致发动机进、排气特性较正常工作状态明显不同,恶化短舱附近流场,对飞机的升力、失速特性带来不利影响.