固体火箭发动机药柱三维结构非线性分析

非线性分析是药柱结构分析中的难点，针对其对结构分析的影响，基于不可压缩材料的粘弹性本构关系，应用完全拉格朗日（T．L）法的虚功方程，综合考虑药柱的近似不可压缩性和几何非线性，推导了三维粘弹性几何非线性有限元增量方程，编写了有限元程序对星型药柱在受压力载荷以及固化降温载荷作用下的结构进行了分析，并与线性计算的结果进行了对比，结果表明，在大载荷作用下，非线性对药柱结构分析的影响比较显著，计算时考虑非线性的影响是必要的。     

挠性空间结构变形的自适应辨识

本文以空间控制中的挠性结构变形的辨识为背景,以李雅普诺夫稳定性理论为基础,从辨识的一致性原则出发,给出时变参数的自适应辨识算法。该算法具有梯度型递推形式,结构简单、容易实现。计算机模拟结果表明该算法是解决时变参数辨识的一种有效方法。     

基于NURBS曲面的轴变形方法

对基于ＮＵＲＢＳ曲面提出一种轴变形方法。该方法首先定义一条轴线，使物体上每一点与轴上一点对应，然后通过操纵轴的变形来变形物体。该方法用于三维人体模型的建立取得满意效果。     

三维数字图像相关技术(3D DIC)在材料形变研究中的应用进展

三维数字图像相关技术(3D DIC)由于其非接触、全场化的测量方式,与其他光测方法相比,具有自动化、光路简单、普适性及抗干扰能力强等优点,广泛应用于多领域多种材料的力学性能测试中,但在应用过程中会出现测量精确性不确定、高温实验测量误差大、大曲率物体可测面积有限等问题。综述了3D DIC在不同种类材料常规力学实验中的应用,通过对比分析3D DIC、传统引伸计测量结果及有限元模拟结果,验证该技术精确性;由于高温和大变形测量中3D DIC的应用是目前的研究热点和难点,故重点介绍了高温散斑制备和多相机DIC等最新技术进展;指出在散斑对测量精度影响、微应变尺度测量、环境因素对测量效果干扰以及在军事材料和生物医学领域应用等方面还需对3D DIC进一步研究。     

Computational study of wing deformation and sting interference effects with the CAE-AVM test case

A modern transonic computational fluid dynamics test case is described in this paper, which is the Aerodynamic Validation Model (AVM) from the Chinese Aeronautical Establishment (CAE). The CAE-AVM is a representation of a modern transonic business jet aircraft with a design Mach number of 0.85. Numerical simulations for the AVM are conducted for two geometries: one baseline geometry, and one geometry that includes the applied model support system of the wind tunnel as well as the deformed wing shape that occurred during wind tunnel testing. The combined influence of wing deformation and model support interference on local and integral aerodynamic features is presented. Comparisons between CFD and experimental results are made; reasons of discrepancy between results from considered cases are analyzed.     

基于CR理论的大柔性机翼几何非线性结构建模

大柔性机翼在气动载荷的作用下,将产生显著的弹性变形,常规线弹性理论的小变形假设不再成立,需要采用能够考虑几何非线性效应的结构模型进行求解。基于CR(Co-Rotational)共旋转有限元理论,把几何非线性大变形分解为刚体的旋转和平移及局部坐标系下的弹性变形,建立了适用于大柔性机翼几何非线性变形描述的结构模型。以大柔性悬臂梁为例,采用载荷增量法,研究了集中弯矩作用下的非线性变形特征,对静力学方法进行了验证,并讨论了耦合加载几何非线性变形特征;以类"太阳神"太阳能布局无人机(UAV)为例,研究了其几何非线性大变形特性。     

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

The grid fin is an unconventional control surface used on missiles and rockets. Although aerodynamics of grid fin has been studied by many researchers, few considers the aeroelastic effects.In this paper, the static aeroelastic simulations are performed by the coupled viscous computational fluid dynamics with structural flexibility method in transonic and supersonic regimes. The developed coupling strategy including fluid–structure interpolation and volume mesh motion schemes is based on radial basis functions. Results are presented for a vertical and a horizontal grid fin mounted on a body. Horizontal fin results show that the deformed fin is swept backward and the axial force is increased. The deformations also induce the movement of center of pressure, causing the reduction and reversal in hinge moment for the transonic flow and the supersonic flow,respectively. For the vertical fin, the local effective incidences are increased due to the deformations so that the deformed normal force is greater than the original one. At high angles of attack, both the deformed and original normal forces experience a sudden reduction due to the interference of leeward separated vortices on the fin. Additionally, the increment in axial force is shown to correlate strongly with the increment in the square of normal force.     

钛合金蜂窝三层结构的扩散焊接研究

介绍了俄罗斯钛合金蜂窝三层结构扩散焊接的研究成果.详细介绍了铝合金、焊接规范选择、接头应力变形状态的分析、模拟计算等,有助于国内钛合金的焊接研究.     

Phasic-to-tonic shift in trunk muscle activity relative to walking during low-impact weight bearing exercise

The aim of this study was to investigate the influence of an exercise device, designed to improve the function of lumbopelvic muscles via low-impact weight-bearing exercise, on electromyographic (EMG) activity of lumbopelvic, including abdominal muscles. Surface EMG activity was collected from lumbar multifidus (LM), erector spinae (ES), internal oblique (IO), external oblique (EO) and rectus abdominis (RA) during overground walking (OW) and exercise device (EX) conditions. During walking, most muscles showed peaks in activity which were not seen during EX. Spinal extensors (LM, ES) were more active in EX. Internal oblique and RA were less active in EX. In EX, LM and ES were active for longer than during OW. Conversely, EO and RA were active for a shorter duration in EX than OW. The exercise device showed a phasic-to-tonic shift in activation of both local and global lumbopelvic muscles and promoted increased activation of spinal extensors in relation to walking. These features could make the exercise device a useful rehabilitative tool for populations with lumbopelvic muscle atrophy and dysfunction, including those recovering from deconditioning due to long-term bed rest and microgravity in astronauts.     

水陆两栖飞机静力试验优化机翼变形的载荷配平

水陆两栖飞机全机静力试验的浮筒着水工况试验中，在试验允许的常规载荷配平方案下，压向大量级水载荷作用于浮筒结构引起机翼较大变形，影响试验精度，因此进行以减少机翼变形为目标的载荷配平研究。将机翼近似为悬臂梁结构，在构建的机翼力学模型基础上应用Green函数建立机翼的挠度曲线方程。首次以考核区域边界肋的挠度和转角为优化目标并建立多目标函数，通过层次分析法和极差变换标准化处理方法将其转化为单目标函数后，采用引入交叉和变异因子的改进蚁群算法进行载荷配平方案优化运算。有限元分析及试验结果显示，优化得到的载荷配平方案可以显著地减少机翼变形，配平载荷不影响考核区域的真实变形，证明了该优化方案的正确性和可行性。