A theoretical method for solving shock relations coupled with chemical equilibrium and its applications

In this study, a theoretical method is proposed to solve shock relations coupled with chemical equilibrium. Not only shock waves in dissociated flows but also detonation waves in combustive mixtures can be solved. The global iterative solving process is specially designed to mimic the physical and chemical process in reactive shock waves to ensure good stability and fast convergence in the proposed method. Within each global step, the single-variable equations of normal and oblique shock relatio...     

中心锥对旋转爆轰发动机内外流场影响的三维数值模拟研究

为探究中心锥对旋转爆轰发动机(Rotating Detonation Engine,简称RDE)内外流场结构与推进性能的影响,本文设计了90°、60°、45°、30°、20°、14°锥角与无中心锥7种构型,对燃烧室内径为78mm、外径为88mm、长度为100mm的RDE进行三维数值模拟,推导了适用于带中心锥RDE的推力公式,获得了各构型下详尽的流场参数。结果表明：在本文构型下中心锥对内流场影响很小,各构型的内流场参数与结构基本一致;中心锥对外流场的爆轰产物有轴向加速与径向吸附作用,能够调控尾部区域的流场特性;中心锥对由压差项产生的推力具有显著的提升效果,最佳推力性能出现在20°中心锥构型中,RDE总推力增益达22.8%。研究结果揭示了中心锥对RDE推力影响的作用机理,阐明了锥角对推进性能的影响规律,对带锥形构型的尾喷管设计工作提供了参考。     

冲击温度的理论计算及分析

当空间飞行器受到碎片的碰撞时,其壳体中会产生冲击加热。文章概述了计算冲击温度的三种基本方法;计算了铁的冲击加热温度,并与实验测量值作了比较。结果表明,利用三项式物态方程计算的冲击温度与测量值符合得比较好。另外,还对影响冲击温度计算值的若干因素进行了分析     

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。      

跨音弯掠风扇转子叶片的气动弹性剪裁

跨音风扇进口级增压比的进一步提高,主要受两方面的制约,一是效率,二是气动弹性失稳。这两个因素与转子流场中的激波和激波诱导的大尺度分离紧密相关。激波结构又和转子叶片前缘空间曲线形状直接联系。因此,如何精心设计转子叶片前缘空间曲线形状来控制激波结构,就成了当代风扇气动力学的前沿,并导致风扇弯掠空气动力学概念的出现。在具体设计中,此问题可称之为气动与气动弹性综合剪裁。本文简述综合剪裁中的一个组成部分,即气动弹性剪裁问题,并对一个单级风扇转子叶片给出实例。     

激波-边界层-分离流相互干扰三维湍流的数值模拟

本文采用数值方法求解时间相关三维可压缩雷诺平均Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程组,模拟激波—边界层—分离流相互干扰三维湍流流动。湍流模型为Ｂａｄｗｉｎ－Ｌｏｍａｘ两层代数模型,改进后用于三维内流问题。采用单元中心有限体积法离散流场控制方程,ＶａｎＬｅｅｒ矢通量格式计算无粘通量,中心差分法计算粘性通量,ＬＵＳＧＳ时间推进格式计算定常流场。本文以二元跨音速扩压器内三流动为算例,数值模拟较强激波—边界层—分离流相互干扰维湍流流动,并与实验结果进行了比较。数值模拟结果,在激波强度、分离点位置和再附点位置等方面,与实验结果吻合较好。     

原子层热电堆热流传感器在激波风洞试验中的应用

高超声速边界层转捩及激波-边界层干扰等基础气动问题的风洞试验中,高频脉动热流是一重要测试量.为了验证自研的原子层热电堆热流传感器在实际风洞试验环境中的性能,利用尖锥模型在Φ2m激波风洞(FD-14A)内开展来流马赫数10、单位雷诺数4.7×106/m等流场条件下的风洞试验,并与高频脉动压力传感器对比,热流测试结果反映出...     

洛仑兹力控制高超声速进气道边界层分离的数值模拟

采用空间HUE格式、时间LU-SGS推进、sst-kw湍流模型、多块结构网格程序,对磁流体动力学(Magnetohydrodynamic:MHD)控制高超声速二维进气道边界层分离进行了数值研究.研究发现,不施加控制时,数值模拟得到的壁面静压和实验结果符合良好,进气道喉道处分离区占据喉道高度的1/3左右.通过施加MHD控制,消除了进气道内部的边界层分离,总压恢复系数从0.502提高到0.56,喉道处流场畸变系数减小了18.6%.     

A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.