反坦克导弹飞行模拟训练成绩评定方法

以合理评价在反坦克导弹模拟训练器上受训射手的训练成绩为主要研究目的，通过对坦克外形的简化和坐标变换，建立了判断导弹命中坦克的数学模型；通过将理想瞄准点扩展成理想瞄准区域，建立了成绩评定的数学模型；在确保动画过程实时性的前提下，可全面合理地评价射击训练过程中射手的操作水平，为培训和选拔射手提供定量依据。     

带有太阳电池阵的卫星电源系统在轨测试方法

根据带有太阳帆板的地球同步卫星在轨测试需求，分析了星上电源系统的组成及技术状态；并以光照区可调节母线为例。给出了卫星电源系统在轨测试方法及相应的计算公式；最后，通过工程验证了该方法的正确性。     

三轴转台谐波幅相自适应控制系统的设计

提出了一种能够有效地提高正弦运动仿真转台精度的谐波幅相自适应控制补偿方法，阐述了谐波幅相自适应控制的机理、结构配置，开发了谐波幅相自适应控制律、分析了系统稳定性，为进一步提高精度还提出了一种在线辨识系统频响模型的实现途径。由转台工作的实测数据及跟踪误差测试表明，本文提出的谐波幅相自适应控制方法的精度明显优于常规的经典控制，对其他精密正弦运动跟踪系统也有普遍意义。     

卫星优化热设计方法

试图把最优化技术应用于卫星工程的热设计中,提出一种优化热设计的方法,并以14个节点模型作为实例进行了计算分析,采用Hooke-Jeeves 的直接搜索法得到了满意的结果。初步编制的计算机程序,可作为卫星热设计方案计算的基础。     

基于粗糙集理论的卫星故障诊断方法

卫星结构和控制的复杂性、独特性和诱发故障的多源性导致其故障诊断的困难．卫星的一种故障模式与许多症状变量有关,目前的故障诊断推理因未充分考虑症状变量的冗余变量而比较复杂．提出了基于粗糙集理论的故障症状约简新方法,用卫星故障实例研究了新方法的应用,结果表明该约简方法对消除卫星故障症状信息冗余、简化和优化故障诊断推理非常有效。     

飞行模拟器飞行指引系统控制器的设计

在现代飞机中，飞行指引系统对飞机的起飞，着陆，预选飞行高度和航向、保持飞行状态和航线飞行等方面起着十分重要的作用，它能向驾驶员提供飞机的姿态指令信号，从而确保了飞机的安全，提出了飞行效率和减轻了驾驶员飞行中的负担。本文主要讨论民机飞行模拟器中的飞行指引系统控制器的设计。     

卫星通信的产业化

回顾了中国发展卫星通信的简要历史，介绍了中国卫星通信的现状和作用。在调查国内用户需求的基础上，预测了１９８８－２００２年国内用户对卫星通信转发器需要的数量。     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

基于双力源的叠加式多维力传感器校准装置研究CSCD

介绍了一种基于叠加机原理的双力源多维力传感器校准装置的设计与研制,对装置的测量不确定度进行了分析,通过对三分量力传感器的校准实验,证明了校准装置不仅可以对多分量力传感器进行单分量校准,还能方便地实现耦合误差的校准。     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.