某型机吊声液压系统温升试验现象分析

本文论述了高温对液压系统的影响和液压系统温升较快的原因。从某型机吊声液压系统温升试验现象出发,分析了其产生的原因。提出了改进建议,并指出地面试验与该型机吊声液压系统实际工作环境的区别。     

Stagnation temperature effect on the conical shock with application for air

The aim of this work is to realize a new numerical program based on the development of a mathematical model allowing determining the parameters of the supersonic flow through a conical shock under hypothesis at high temperature, in the context of correcting the perfect gas model. In this case, the specific heat at constant pressure does not remain constant and varies with the increase of temperature. The stagnation temperature becomes an important parameter in the calculation. The mathematical model is presented by the numerical resolution of a system of first-order nonlinear differential equations with three coupled unknowns for initial conditions. The numerical resolution is made by adapting the higher order Runge Kutta method. The parameters through the conical shock can be determined by considering a new model of an oblique shock at high temperature. All isentropic parameters of after the shock flow depend on the deviation of the flow from the transverse direction. The comparison of the results is done with the perfect gas model for low stagnation temperatures, upstream Mach number and cone deviation angle. A calculation of the error is made between our high temperature model and the perfect gas model. The application is made for air.     

Response of the lower atmosphere to intense geomagnetic storms

In this short paper we examine the possible connection between atmospheric parameters measured at low and middle altitudes and geomagnetic storms occurred in 2000 and 2003. For that, from a chain of stations located near the meridian 60°W we compare the storm time values of temperature and wind speed with their standard deviation 2σ obtained from quiet time values. We observed statistically significant variations at several altitudes during the storm recovery phase and after it, both in neutral wind speed and temperature. The results obtained suggest that atmospheric parameters could be affected by geomagnetic storms.     

复合涂层刀具钻削高温合金Inconel 718钻削性能研究

高温合金Inconel 718是一种典型的难加工材料,本文利用DEFORM-3D软件对无涂层、TiC单涂层和TiC/Al₂O₃复合涂层硬质合金刀具进行钻削高温合金Inconel 718的仿真分析,研究在不同钻削条件下复合涂层刀具的切削性能,并进行钻削实验进行验证。结果表明：TiC/Al₂O₃复合涂层刀具能有效降低钻削轴向力和钻削温度,其轴向力降低幅度最高为20%,钻削温度最高降低了35%。通过钻削实验验证了仿真模型的准确性,可为实际钻削加工高温镍基合金Inconel 718中选择涂层种类及钻削参数提供参考。     

高温高应变率耦合对DD407镍基单晶合金的性能影响

为了理解一种新型DD407镍基单晶高温合金在高温高应变率下的力学行为,利用CSS4410型电子万能材料试验机和具有高温高应变率耦合试验功能的Hopkinson压杆系统测试该合金在温度293~1 273K,应变率分别为0.001、1 000及4 000/s条件下的塑性流动特性,并对变形前后的试样进行金相和SEM微观分析。结果表明:DD407合金在高应变率下的使用温度不能超过1 073K;其在压缩情况下的破坏均为剪切破坏;在温度接近或超过某一临界值,该材料的屈服强度和塑性流动应力对温度和应变率才会有很强的敏感性,与常规金属不同,该材料应变时效现象不明显。     

液体火箭发动机铣槽推力室三维壁温分布计算

采用三维有限元模型对液体火箭发动机铣槽推力室进行了壁温分布计算。边界条件按一维经验公式处理。计算中比较了不同冷却剂流量。不同铣槽肋厚及肋数对温度分布的影响，并与一维简化肋模型的计算结果进行了比较，表明三维计算的温度分布规律更加合理。在小冷却剂流量、大肋厚情况下，周向温度分布不均也很严重。设计中对壁温进行三维分析是非常必要的。而对于高密肋，一维简化肋模型具有良好的近似性。     

基于光外差的光电探测器绝对频响测试技术研究

本文介绍了一种基于光外差的光电探测器绝对频响测试方法,通过对绝对频响的数学理论推导,得出光电探测器频响参数的计算公式;设计并研制了一套光外差测试系统,实现波长在1550nm对响应带宽高达67GHz的光电探测器频响测试;通过与高精度光波元件分析仪比对测试,验证了系统的准确性和可靠性,系统最大偏差不大于0.8dB,测量重复...     

Water surface temperature estimation from Landsat 7 ETM+ thermal infrared data using the generalized single-channel method: Case study of Embalse del Río Tercero (Córdoba,Argentina)

Monitoring of warm distribution in water is fundamental to understand the performance and functioning of reservoirs and lakes. Surface water temperature is a key parameter in the physics of aquatic systems processes since it is closely related to the energy fluxes through the water–atmosphere interface. Remote sensing applied to water quality studies in inland waterbodies is a powerful tool that can provide additional information difficult to achieve by other means. The combination of good real-time coverage, spatial resolution and free availability of data makes Landsat system a proper alternative. Many papers have developed algorithms to retrieve surface temperature (principally, land surface temperature) from at-sensor and surface emissivity data. The aim of this study is to apply the single-channel generalized method (SCGM) developed by Jiménez-Muñoz and Sobrino (2003) for the estimation of water surface temperature from Landsat 7 ETM+ thermal bands. We consider a constant water emissivity value (0.9885) and we compare the results with radiative transfer classic method (RTM).     

Generation mechanism of the whistler-mode waves in the plasma sheet prior to magnetic reconnection

The whistler-mode waves and electron temperature anisotropy play a key role prior to and during magnetic reconnection. On August 21, 2002, the Cluster spacecrafts encountered a quasi-collisionless magnetic reconnection event when they crossed the plasma sheet. Prior to the southward turning of magnetospheric magnetic field and high speed ion flow, the whistler-mode waves and positive electron temperature anisotropy are simultaneously observed. Theoretic analysis shows that the electrons with positive temperature anisotropy can excite the whistler-mode waves via cyclotron resonances. Using the data of particles and magnetic field, we estimated the whistler-mode wave growth rate and the ratio of whistler-mode growth rate to wave frequency. They are 0.0016f_ce (Electron cyclotron frequency) and 0.0086f_ce, respectively. Therefore the whistler-mode waves can grow quickly in the current sheet. The combined observations of energetic electron beams and waves show that after the southward turning of magnetic field, energetic electrons in the reconnection process are accelerated by the whistler-mode waves.     

射流预冷试验防水温度传感器设计

为解决射流预冷试验中遇到的常规带罩温度探针接点遇水问题,基于气液两相流环境设计了1种防水温度传感器。通过设计滤水和隔热结构,避免了水对测量结果的干扰。现场校准试验结果表明:在100～450℃,该传感器的测温值比常规带罩温度探针的低1.0%～1.1%。射流预冷试验结果表明:防水传感器在一定水气比下是有效的;与常规带罩温度探针反向测试的截面平均总温估算值对比表明,在来流343.3℃、水气比5.5%的工况下,在雾化充分的测量截面,剔除个别遇水测点,防水传感器测温值明显比热电偶的高,差值最高达11.8%。,说明防水传感器可以有效减小传热误差。